Stretch Wrap Film Hand and Machine Wrap LLDPE Stretch Film Pallet Stretch Wrap

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
100 roll
Supply Capability:
1000000 roll/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction of Stretch Wrap Film 

Stretch Wrap Film is made of 100% pure sofe LLDPE raw material.

 

Application of Stretch Wrap Film

Stretch Wrap Film is available in hand-applied and machine formats for product moisture proof, anti-dust, fastening and protecting etc. Our stretch film are widely used in following fields, such as outer packing of corrugated box or pallet, packing of loose and small products together, packing of bare machine etc.

Advantage of Stretch Wrap Film

Economical and Practical

Excellent extension, fight to impale

Excellent ability of binding

Price: According the size and the order quantity

 

Packing of Stretch Wrap Film

One 20GP container can be loaded about 10-15tons.

By sea or by air all available.

 

Size of Stretch Wrap Film

Thickness:20-200um

Width:30-300cm

Length:1500-3000m

Notice: Special products made as per customer requirements.

 

Pictures of Stretch Wrap Film

Stretch Wrap Film Hand and Machine Wrap LLDPE Stretch Film Pallet Stretch Wrap

Stretch Wrap Film Hand and Machine Wrap LLDPE Stretch Film Pallet Stretch Wrap


Specification of Stretch Wrap Film


Thickness Range
Tensile   Strength

Elongation at Break

Angle Tear StrengthImpact Ability of PendulumTacknessLight Transmission RateFrog Density
Micron  Mpa    %  N/mm  J/mm  N/cm   % %
15-17  37  250500  120  0.14   3   932.4
18-20  38  300600  120  0.15   3   922.5
21-25  39  300600  120  0.17   3   912.6
26-30  40  400650  120  0.19   3   902.7
31-35  41  450700  120  0.21   3   902.8



Remarks

1. The data above are typical results and subject to change without notice.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

              Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3. The products should be stored at room temperature and kept from wet and heat source.

4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.

We have organized several common questions for our clients,may help you sincerely:


FAQ

①How about your company?

A world class manufacturer & supplier of castings forging in carbon steel and alloy steel,is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.

②How to guarantee the quality of the products?

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Glued to the door, how can the plastic film be cleaned due to oxidation?
Hair dryer blow, and then remove or use wood shovel, rubber mark can be erased with solvent oil.
Q:What material is the film on the waterproof roll? What's your name?
The former is made of paper or low grade mortar. Because of the construction of the rigid layer, it is easy to enter the concrete, so it is not necessary. Low grade mortar construction of the transport car damage to the waterproof layer, and the performance of non slip is not ideal, so it is also less used. Now generally use dry linoleum, one also useful thick plastic film and other materials.
Q:How to detect the surface tension of plastic film?
A layer of ink used to bind a printed film with paper tape. The less the ink is stuck, the better it is treated. To peel off the bonded composite film, the greater the peel strength, the better the treatment effect.
Q:Why do you put plastic film on the paved road?
Cover with plastic film to prevent moisture from evaporating. If the moisture is too fast, evaporation will affect the curing of concrete, it will cause cracking, peeling and other phenomena, affecting the strength of concrete.
Q:Why should a plastic film be added to the new cement road?
According to the actual situation at that time, if the temperature difference is greater than 25 degrees, should strengthen the insulation materials, such as covering rock wool, etc., in order to prevent concrete produce too large temperature difference, stress and cracks.
Q:In a bowl with the seeds covered with plastic film, you need time off the air
Plastic film cover in order to keep the soil moisture in the soil, air breathing for seed germination and growth of enough, only to grow seedlings, to remove the cover film, otherwise the film may have a high temperature.
Q:What's concrete plastic sheeting for moisture conservation?
Plastic cloth maintenance: plastic sheeting is used to cover the concrete surface, curing the concrete.
Q:Is it possible to lay a plastic film between the roof slab or concrete for waterproofing purposes?
It is recommended that the precast slab be first poured with a diameter of 4mm or more, 200 spacing, two-way C20 fine stone concrete, 40mm thick, and then do waterproof two road, a little bit better insulation layer, and then make surface layer protection.
Q:What is the density of the common PE films?
Its density is about 0.92g/cm3. Low density polyethylene film transparency and good sealing performance, waterproof, moisture-proof; low tensile strength, tensile elongation, easy wrinkled, thin film below 0.03mm, tension control should be small, and all the tension to a constant, especially easy to deform when heated, causing difficulties in color. Therefore, when drying, the film surface temperature should not be too high (within 550C). According to the film forming process, can be divided into blown film, cast film (IPE) (CPE), several low foaming film etc.. IPE thin film tensile strength and opening than CPE film, with positive printing, can be used for food bags, clothing bags; CPE thin film thickness uniformity, surface gloss, transparency and thermal sealing is better than PE, but positive and negative printing, but the production cost is higher. CPE film is mainly used as the inner layer of composite bags and cosmetics, pickles and pastry packaging; low foaming film decorative, thick texture, not easily tensile deformation, using positive printing, as New Year paintings trademarks and hand bag etc..
Q:Plastic film in the air conditioning metal shell can not be exposed, how do?
Plastic film attached to the metal shell, because the plastic is close to the metal surface, a long time, the formation of intermolecular forces and metal surface of the plastic shell, to stick together, heating will lead to intermolecular force becomes small, but can also melt the plastic film, may lead to stick more firmly; recommend the use of ice the way to reduce the temperature of the metal shell, so that the intermolecular force will be reduced, while the plastic will harden, safer

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range