Steel Flange DN500 PN10 with Low Price on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | Plywood pallet/case, Steel pallet or as per customers requirement. |
Delivery Detail: | Within 20 work days after prepayment |
2.Brief Description:
EN1092-1 Type05 Blind Carbon Steel Flange
1)ISO9001:2008
2)Size:DN10-DN2000
3)Material: S275JR; C45; A105; P245GH
4)Over 15 years experience
Specialty Flange
ANSI Flange;Swivel Ring Flange; Anchor Flange; Bulkhead; Norsok Compact Flange; API 6A & 17D Flange; Tube Sheet; Non Standard Flange
NACE MR0175/ISO 15156, NACE MR 0103 compliance
C.S.; S.S.; High Yield Strength Alloy Steel-A694 F52~F70;
CRAsInconel 625, Incoloy 825, Duplex F51, Super Duplex F53, F55, Titanium, Monel 400, 904L, Hastelloy C276 and so on;
3.Stainless steel /alloy steel/carbon steel/ din 2633 wn stainless steel flange Products Specifications
din 2633 wn stainless steel flange
1.Socket welding.
2.DIN:6/10/16/25/40Bar.
3.SIze:1/2" To 160"
4.ISO9001: 2008,ISO4001:2004,GB\T28001-2001
4.Specifications
1.Type: DN500 PN10 Steel Flange
2.Size: DN500
3.Mat.S235 JRG2
4.Rating: PN10
5.Standard:DIN
5.PRODUCT DESCRIPTION & SHOW
MATERIALS | Carbon Steel: ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH |
Stainless Steel: ASTM A182, F304/304L, F316/316L | |
Alloy | |
STANDARD | ANSI/ASME/ASA B16.5 FLANGES, ANSI B16.47 A/B FLANGES |
JIS B 2220 FLANGES, KS B 1503, DIN SERIES, UNI, EN1092-1, BS4504 | |
BS 10 TABLE D/E/F FLANGES, SANS 1123 FLANGES/SABS 1123 | |
GOST12820-80/GOST12821-80, NFE29203/NS/AS/ISO/AWWA FLANGES | |
TYPE | Plate/Blind/Slip-On/Weld-Neck/Blade/Threaded/Socket-Weld/Lap-Jiont/Figure-8 Blanks/Orifice |
Back- up Ring /Red Blind/ Paddle Blind | |
Client's Flange/Special Flange | |
PRESSURE | 150LBS, 300,600,900,1500,2500 ANSI, ASA B16.5 |
PN6 PN10 PN16 PN25 PN40 PN64-DIN/UNI | |
PN6 PN10 PN16 PN25 PN40 PN63-EN1092-1/BS4504 | |
PN0.6Pa, PN1.0Pa, PN1.6. PN2.5,PN4.0-GOST12820-80 | |
PN0.6Pa, PN1.0Pa, PN1.6. PN2.5,PN4.0, PN6.3. -GOST12821-80 | |
600kPa, 1000.1600.2500.4000.-SANS 1123 | |
5KG, 10KG, 16KG, 20KG, 30KG, 40KG-JIS B2220/KS B1503 | |
TABLE D, TABLE E ,TABLE F-BS 10, AS2129 | |
CLASS D, CLASS E, CALSS F, AWWA C207 | |
SURFACE | Rust Preventing Oil/ Antirust Oil |
Black/Yellow/Golden Coating (Water-Based Paint) Varnish Paint Coating Varnish Oil Coating | |
Electro Galvanizing Coating (Cold Galvanizing, Color Golden or silvery white) Hot Dip Galvanizing | |
TECHNIQUE | Forging |
Heat Treatment: Annealing Quenching and tempering Precipitation/Selective/Case Harding | |
CERTIFICATE | ISO 9001/PED/API/TS |
APPLICATION | Water works, Shipbuilding industry, Petrochemical & Gas industry, Power industry, Valve industry |
INSPECTION | Factory In-House Check or The Third Party Inspection |
PACKING | Plywood Pallets/ Wooden Case Or As Per your Specification |
PAYMENT | T/T D/P D/A L/C |
- Q:Optical fiber telecommunications, but there is no place I want to position myself to buy white pigtail jumper modification to the living room TV wall. Now my idea is in the middle of the 2 flange butt joint SC, SC head of a white line connecting leader Telecom, a leader to the wall plug SC flange joint, I said because the total length of 50 meters and it would be enduring great??? The speed of the impact is not big?!!!! StopThe multimedia box SC box - Telecom - strong SC flange flange ----SC pigtailed light cat2 flanges! Wait for God online!!!!
- Of course, also need to use some domestic good quality goods, Jingdong search ranking in front of a few can, like win for brand is good
- Q:Can you have a more general idea?
- Is the distance from the lens mount flange from to the photosensitive element between the interchangeable lens camera. In the design at the beginning of the fixed bayonet flange from each lens, for later design can be achieved after installation to bayonet infinity focus.
- Q:What's the flange surface?
- Flange sealing surface has a full plane FF, protruding surface RF, convex M, concave F, tenon surface T, groove surface G, ring connection surface RJ, general concave convex MF, mortise and tenon surface TG, ring connection surface RJ are paired usePL welding plate flange with flange, SO diameter, WN butt welding neck flange; IF integral flange, SW socket welding flange, TH threaded flange; loose flange ring PJ/SE welding, PJ/RJ welding ring flanges; flanges BL, BL (S) lining flange
- Q:Who can tell me what "DN" and "PN" mean in flanges, and what does PN16 stand for?
- DN----- through the flange -- such as pressure DN15. with Phi 18 DN25. with 32 DN30. diameter pipe pipe with pipe ----------PN----- Phi 38 maximum value, the unit is "MPa, 1 MPa and cm - equivalent to 10KgPN16 refers to the pipe and the flange matched bearing pressure approximately 12 MPa. The equivalent of 120Kg - and cm
- Q:Dn is 250, Pn25 flange, what is the hole distance?
- Flange center hole distance d1=370mmFlange diameter D=425mmGB GB/T9113.1-2000
- Q:Flange valve Q41F-16C/P/R mark, specific meaning?
- Q- ball valve, 4- flange, 1- through type, 16- nominal pressure 16 kg, c- cast steel, p- stainless steel
- Q:Introduction of flange
- Pipe flanges are flanges used for piping in pipe installations. They are used on equipment and refer to the entrance and exit flanges of the equipment. The flange is lined with bolts to secure the two flanges. Gaskets for gaskets between flanges. Sub threaded flange connection (threaded connection), flange welding flange and flange clamp. Flanges are used in pairs. Low pressure pipes can be made of wire flanges and welded flanges with pressures of more than four kilograms.
- Q:Works2012 of the body flange buttons? As shown in the diagram, this is the tutorial. Which expert to point out, thank you! TenWhy I can not find the SolidWorks2012 of the body flange buttons? As shown in the diagram, this is the tutorial. Which expert to point out, thank you!
- The sheet metal commands are uniformly arranged in the sheet metal function menu, as on the left of your screenshot,How can I find out?First of all, in your screenshot of green hook, red X above: features, sketches, evaluation and other columns,Right click on the mouse, you can find the sheet metal function menu, tick on it.For reference only, thank you!
- Q:Is the flange fitted with a flange?
- Pipe flanges are flanges used for piping in pipe installations. They are used on equipment and refer to the entrance and exit flanges of the equipment. The flange is lined with bolts to secure the two flanges. Gaskets for gaskets between flanges. Sub threaded flange connection (threaded connection), flange welding flange and flange clamp. Flanges are used in pairs. Low pressure pipes can be made of wire flanges and welded flanges with pressures of more than four kilograms. Add a gasket between the two flanges and secure with bolts. Different pressure flange thickness is different, they use the bolt is also different. Water pump and valve, and in the pipe connection, these equipment parts of the equipment also made corresponding flange shape, also known as flange connection. Any connecting parts that are bolted and closed in the vicinity of the two planes are generally referred to as flanges, such as the connections of the ventilation ducts, which can be called flanges".
- Q:Which flange is the front pipe case flange and the cylinder flange?
- The front pipe case flange is the tube part, which is connected with the tube plate.A cylinder flange is a flange that is connected with a shell on the shell side, and no flange is used on the ordinary heat exchanger.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Steel Flange DN500 PN10 with Low Price on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
