high production ability
Stainless Steel Tube
Square pipes, round tubes, oval pipes, special shaped pipes, empaistic pipes, fittings
201: Ni 0.8%~1%
202: Ni 3.5%~4.5%
304: Ni 8%, Cr 18%
316: Ni 10%, Cr 18%
0.3mm - 3.0mm
6m or as customers' request
a) Outer Diameter: +/- 0.2mm
b) Thickness: +/- 0.02mm
c) Length: +/- 5mm
ASTM A554, A249, A269 and A270
180G, 320G, 400G Satin / Hairline
400G, 500G, 600G or 800G Mirror finish
Sanitary, food industry, Decoration, construction,
upholstery, industry instrument
Squash test, extended test, water pressure test, crystal rot test, heat treatment, NDT
15-30 days after receiving the full payment
Payment by T/T, 30% as advance payment and 70% balance pay before shipping.
Valid time is 3 days for price usually.
A.7 days if this goods is stock goods.
B.30 days if this goods will be produced after order
1.Professional engineer advices
2.Product Warranty is offered
3.OEM, ODM , Customer design
- Q:Building energy efficiency acceptance of what documents
- Technical documents
1.1 through the review of the agency to review the energy-saving design and related technical documents (such as energy-saving design, energy-saving design calculations, etc.);
1.2 exterior wall, roof and hot bridge parts of the insulation construction practices or construction program design and construction plans;
2 Building and insulation materials for the manufacture of specimens
2.1 wall samples: If the ordinary clay hollow brick wall should be asked about 60 ordinary clay hollow brick, such as small hollow block (190 × 190 × 390) wall should obtain 14 blocks and seven small pieces of small hollow block ;
Roof test specimen: 0.20 cubic meters of concrete material should be obtained;
2.2 sand: about 200 kg;
2.3, cementing material (cement 30 kg, lime cream 10 kg, etc.);
2.4 insulation materials and installation of insulation materials annex (calculated by 1.5 square meters);
2.5 plaster material and finishes (in 1.5 square meters).
- Q:Stainless steel sheet approach to provide any proof of quality documents
- The simplest is the material certificate slightly, generally large steel mills are made of stainless steel material certificate. If your product needs environmentally friendly, then the use of stainless steel on the need for environmental certification, like ROSH certification.
- Q:Whether the civil tender contains the curtain wall and does not contain the curtain wall
- If the total tender documents contain curtain wall, indicating that the total subcontract management, behind the curtain wall unit calibration, signed the total package, the owner and the curtain wall units of the tripartite agreement, take the total package of the notice and the three parties can be directly filed for the record.
- Q:Residential stone curtain wall design height of not more than 50m to demonstrate it
- In accordance with the provisions of Article 6, paragraph 1, of Annex II of the "more dangerous part of the project with a greater risk than that of the" more dangerous part of the project safety management approach ", only 50 meters and above Expert argument.
- Q:What are the contents of the curtain wall energy conservation project quality acceptance?
- Curtain wall energy-saving construction of the following parts or projects should be hidden project acceptance, and should have a detailed text and the necessary image information:
1 is the thickness of the insulation material and insulation material is fixed;
2 wall around the wall and the joints of the insulation material filling;
3 construction joints, settlement joints;
4 steam layer;
5 hot bridge parts, heat sink nodes;
6 joints between the curtain wall panels;
7 Condensate collection and discharge structures;
8 curtain wall ventilation device.
- Q:Curtain wall energy-saving project acceptance of the general project which
- Curtain wall energy conservation project quality acceptance includes the following: 1) hidden acceptance requirements. 2) curtain wall materials, accessories, accessories, components of the quality, including insulation materials, glass, shade components, unit curtain wall panels, seals, insulation profiles. 3) materials, accessories, accessories, components witnessed sampling, re-inspection requirements. 4) curtain wall air tightness requirements, laboratory inspection requirements.
- Q:Curtain wall design documents review how qualified newspaper supervision
- Upstairs that is also OK, but I think the best to play an A4 table, followed by a certificate sent in the past better, so it seems more formal, but the certificate to his copy is on the line.
- Q:What are the curtain wall materials to do? The beginning of the time
- At the same time, the curtain wall project acceptance, but also to the owners to provide "curtain wall use maintenance instructions", in the curtain wall before delivery, but also for the owners of training curtain wall maintenance and maintenance personnel. Curtain wall works other technical and economic documents, in accordance with the "Construction Project Document Archiving Code" (GB / T50328-2001) provisions of the directory filing.
- Q:Bidding documents are glass curtain wall, the party has to check the aluminum alloy window, how to do?
- Generally fixed on the window lintel, is the top of the entire window.You need the proportion should be on the proportion of solid slip, the slide is the sash of the slide plus fixed, is a dual-use profiles, doors and windows designed to save Material, and it can be made to the sill a chute, you can also fix the above glass. Generally no fixed ratio
- Q:Fire aluminum glass is what glass where to sell
- This involves more, you can special check, of course, you need to be specific communication
We sparkplugs "quality, profession, honesty" as enterprise culture. Our purpose is to: competition adn development, quality as the fundame-steel, square steel.Shanghai sity will in pursuit of national and international markets, developing along the direction ofcollectivization, industrialization and internationalization.
1. Manufacturer Overview
|Annual Output Value
||US$1 Million - US$2.5 Million
||Southeast Asia; Africa; Mid East; Eastern Asia; South Asia; Domestic Market
||HACCP;ISO 9001:2000;ISO 9001:2008
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range