Stainless Steel Float Switch Submersible Sewage Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Stainless Steel Float Switch Submersible Sewage Pump
My company has more than 40 years history, is the China general machinery pump industry association member units.My company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.My company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Application
This series pump is widely used for sewage treatment of city construction discharge for architecture projects, hotel, mine, pond, dyeing and printing, paper making and textile industries.
It is the ideal tool for transportation of sludge, slurry, living sewage, feces and stale wastes, solid grains fiber, paper chips, sandy soil etc.
Model Description
100WQ 50-30-5
100: Drain aperture (mm)
WQ: Submersible sewage pump
50: Capacity (m3/hr)
30: Head (m)
5: Power (kW)
Operations Conditions
1. The medium temperature should not be over 60oC, the density 1200Kg/m3, and the pH value within 5-9.
2. During running, the pump must not be lower than the permitted lowest liquid level.
3. Rated voltage 380 V, rated frequency 50 Hz. The motor can run successfully, only under the condition the deviations of both rated voltage and frequency are not over ± 5%.
4. The maximum diameter of the solid grain going through the pump has not to be larger than 50% of that of the pump outlet.
Picture
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
- Q:1978 Ranchero 500. Pumps leaking like crazy. I have a belt to remove, which i assume is the serpentine belt? Its tight as can be on the pulleys. I have no clue how to remove this and any other advice on this do-it-yourself project would be much appreciated. Thanks
- being a 78 it probably has a V belt instead of a serpentine belt. you loosen the adjustment bolt on the alternator and the long through bolt, push the alternator and the belt should come off. you will need to take the fan off, it should have 4 bolts to take out to remove the fan. then you take the hose off after you drain the radiator and take out the water pump bolts and pry off the pump. now before installing the new pump make sure the gasket surface is clean and dry. put some good sealer on both sides of the gasket. to keep the gasket from moving i use string like thread and tie the gasket on. put the pump in place, put the bolts back in and tighten them, put the hose back on, put the fan back on and tighten the bolts and refill the radiator. if you want good sealer use what i use. i use indian head shellac. once that stuff gets set up it won,t leak. auto zone sells it in a small brown bottle.
- Q:Question for you. I'm looking for a 12v (no AC converter, please) water pump to drive up to 4 water misters. Needs to run off the battery, without an AC converter (already found those). The pump will pull from a water reservoir and provide cooling relief on hot days through the misters. BTW... the pump should be reasonably small, limited to a few pounds...If you have any ideas, please advise.Thanks again,Robert
- The ac converters are 12V rectifiers so just use the pump (wire to a battery) without the converter or check with motor home repair place
- Q:I have a 2002 honda civic with 85k miles the dealer says the timing belt should be replaced. But with the water pump timing belt tensioner also have to be replaced???
- The timing belt drives the water pump in your car. To replace the water pump, you have to remove the timing belt. When you are having the timing belt replaced, it makes sense to also replace the water pump. There is very little additional labor to do so, as the timing belt is already removed. You do not have to do so, but if you do not, and the water pump subsequently fails, you will be paying the full labor charge to replace it rather than just the cost of the part. As to the belt tensioner, I would replace that because it is a wear item, and if it fails it can cause a timing belt failure. If you are going to risk the timing belt failing (and causing major damage to the engine) you might as well not have the belt replaced. I would never replace a timing belt without also replacing the water pump and tensioner. It is false economy to do so.
- Q:Which is the better option for a home water pump? a submersible pump or floor based pump?
- In case of pump failure, it's much easier to repair/replace a floor based pump plumbed with isolation valves and unions. I've replaced a few due to motor failures and flood damage. Arguably, the submersible pump wouldn't have suffered damage due to flooding. Another consideration is vertical pump height. A floor based pump has to draw a vacuum to induce water to flow up to the impeller. This limits the practical draw to between 25 and 30 ft. Much more than that height and the vacuum will exceed the vapor pressure of the the water, boiling it rather than pumping it. A special device can be used to boost the lift: an ejector is placed down the well. Water is pumped down to the ejector, which pulls additional water back up using the venturi effect. This method suffers from additional friction losses but has clear advantages. If you need to pump water up a well more than 20 feet vertical, you should consider a submersible pump, particularly if you are concerned about the possibility of the water table lowering.
- Q:I am trying to areting my pond but air pump cost too much. I have an extra water pump available if I make two intake opening, one for water the other for air, would it work? or will it blow up the pump and kill all of my koi because it is made for pump water.
- It's not air it's vacuum
- Q:i have recently taken of my whole water pump cover to drain the fluid, not knowing that there was a drain screw to do it.So when i took it off, i broke the seal, and now the coolant constantly drips 24/7 until i have none left, nearly blew my head gasket the other day.I was going to get a new part, but then a friend told me about locktite to seal it shut so that it does not leak????Is this the super glue stuff orrrrr? :(Please help me and links would be good so i know what to getThanks you very much!
- DPO, You will need the water pump gasket, water pump gasket sealant and the manual. DO NOT USE SUPER GLUE. Remove the cover [after draining the coolant this time] and clean everything up nice and dry. Resist the urge to scrape and gouge the parts with a screw driver to remove the old gasket material. you can use a scotchbrite pad to clean it all up. [no, steel wool cannot be used] Use a THIN film of sealant on each side of the gasket [NO, more is not better] and bolt it back together gently or you risk cracking the pump cover. Don't forget to refill with coolant and recheck after it has warmed up and cooled again.Get the manual before you do any more damage. You didn't give the year or exact model 85 so the link below is just for example.
- Q:I was wondering if the noise from a water pump can bother my crested gecko. I have a water pump that cycles the water that is in the leca balls, it does not make a load noise but the noise is there. Will this bother him?
- very properly, first of all you ought to bear in mind that crested geckos are arboreal and that hight is greater significant then length. an elementary ten gallon a grew to become on its factor with a clasp on demonstrate screen lid works effective. Exo terra 12x12x18's additionally artwork fairly right. The minimum length for an person crested gecko might desire to be a 10 gallon. 12x12x18 is greater or less ten gallons. I save person trios in custom 40 gallon aquariums yet I doubt you're breeding your cresties sooo. in case you prefer to apply a 10 gallo with a clasp on demonstrate screen lid you are able to continuously silicone a lexi-glass piece on the backside area of the tank so substrate does not fall out. besides that, you are able to connect fake flowers to the right of the enclosure for hiding areas. you additionally can upload some cork bark or choose the flow wood to the enclosure. For substrate use paper towel or rept carpet. that's greater much less costly and cuts down on the threat of impaction. you additionally can upload to bowls to the backside of the enclosure. One for repashy nutrition blend and yet another for water.... thats in actuality it. in the experience that your using humidity and temperature gages you will possibly desire to positioned them in direction of the right.
- Q:Water is pumped upwards 4.000 m into a pool. The flow rate of the water is 4.000 L/min and it takes 10.00 minutes to fill the pool. What is the power of the pump?I would appreciate any help that you can give me - this is a question on an upcoming test!
- You have the following information: Mass of water delivred = 4*10 = 40 litres = 40kg Height = 4 metres time = 10minutes = 600 seconds Work done = m*g*h Work done = 40*9.8*4 work done = 1568J Poweer = work done / time Power = 1568/600 Power = 2.61 Watts. It seams a very small pump to pump only 4 litres/minute.
- Q:Pump suction and pressure side road why should vacuum table and pressure gauge, and what role they have?
- The vacuum meter is used to measure the vacuum degree of the water pump before the water pump pumping, and to a certain degree of vacuum, the water can be sucked into the upward pressure position of the pump.A pressure gauge is used to indicate that the pumping is pressure in the pipe. The size of the pressure is related to the lift head, pipe diameter, atmospheric pressure and so on.
- Q:I would like to pump water from a canal which is approx. 65ft from my existing sprinkler plumbing. the height of the water level on average is approx. 6ft from the surface of the ground. I will need about 35 psi to operate the sprinkler zones. would the following pump work given the lose of pressure?... Horsepower:1.5Voltage:110V 60hz 9.5AmpPower ( max ):1100 WMax Flow :330 L/Min (87 GPM)Suct Hmax9M(30ft)Max Head:18 MInlet/Outlet Size:1.5quot;RPM:3450
- it almost has to. the max amperage for anything with a 110 volt plug is about 12.5 amps. it should as long you are not pumping the water uphill. Please give me the 10 points for best answer!!
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Stainless Steel Float Switch Submersible Sewage Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
