stainless steel flange
1. We can supply good quality and good price flanges.
2. Fast delivery time and perfect design.
3. Good service.
Features of stainless steel flange
1) Stainless steel flange and carbon steel flange
2) Standard ANSI, JIS, DIN, UNI, BS, AS .GOST..EH
3) Material A105,A350LF2,A694,GRADE F52 60 65 70,S235JRG2,C22.8,ST37.2,SS400,S20C,Q235,20Mn,16Mn,20# A182 F304 F316 F317 F321 F51 F53,DIN1.4571 1.4301 A182F1 F5 F9 F11 F22 ECT.
4) Production with anneal solution for stainless performance
5) Special design available
- Q:PVC can the pipe joint be butted with the joint? How do I get it?
- For example: 110mm diameter PVC pipe joint two, to connect them, you can cut a 110PVC tube (length 8cm), at the end of a first pipe with special glue inserted into a connector, then put another head on glue, then inserted into another joint, so ok.
- Q:Is the trachea connected directly to the inside and outside threads? I remember a sealing ring
- The question is too abstract:#1: if the pipe thread (G, NPT, BSP), only need to use raw tape or liquid TEFLON coated, tighten can be.#2: some joints are sealed by the cone. Sealed by a cone (of a ferrule); some have O rings, others are straight. You can find it on PARKER's product samples.#3: some connections are screwed with M thread. Seal by type O ring or copper gasket. You go to FESTO, SMC's website to find the M thread connector, you can.#4: there are other types of fast couplings, too. There are too many kinds.
- Q:PPR pipe joints did not plug in the melt, in the end will leak?
- A, in general, as long as the PPR hot melt pipe effective connection, through the fusion will fuse together, will not leak, and if not assured, it is recommended to re melt.Two, the pipeline before welding to seriously clean pipes and appearance, cleaning pipe appearance of oil, impurities and burrs. To carefully insert pipe length should be appropriate, should be symmetrical flange to discuss the formation of pipeline connection, if not well proportioned, stability that side, reflected weld is not ideal, the discussion is not difficult to guarantee Water Leakage, you should promptly reconnect.
- Q:Quick plug and card sleeve joint sealing which good?
- Quick plugPlug connection is the most convenient plug and play connection mode, especially in some of the trachea connection is very inconvenient, difficult space occasions, can better reflect the advantages of fast plug.
- Q:What is the reason that the rubber hose of the fire hose is flowing black oil?
- Fire hose fittings, rubber ring, good or bad judgement:1, the rubber ring from the work of the media to start, if the media selection is not good, but also increase the rubber ring corrosion, speed up the rubber ring damage. 2, from the seal itself quality, carefully check the appearance, and then measure the size, in general, the quality of the rubber ring life span on the president.
- Q:G1/8 "pipe joint end special sealing WD-B02 is what mean
- The special sealing ring WD-B02 for the end of pipe joint is one of many industrial seals. It is used as a special seal for hydraulic fittings such as pipe joint, hydraulic plug and transition joint,
- Q:Hydraulic hose connector size 20As shown in Figure six, the angle is 71mm to the edge, 80mm to the diagonal, approximately 34mm higher
- The maximum thread size is M60, but the maximum size is only 50.Press joint standards; hydraulic pipe fittings - screw thread. A standard two; classification; 1. screw internal and external threads two; 2.; according to the tooth shape can be divided into: 1) 2) 3 triangular thread trapezoidal thread; according to the 3. line number single thread and multi thread;; 4. by rotation in the direction of the left and right screw screw two, right standard; 5. by use of different points are: with the common thread, metric thread sealing pipe; two. 1. common metric screw threads; metric screw thread with a capital M, tooth type angle 2 DEG =60; 2. metric screw thread according to pitch
- Q:What are the names of all types of hydraulic pipe couplings?
- Hose connector is generally crimping connector and in-line connectors and connecting screw joints etc..According to the British general thread joint, metric joint, joint us and so onQuick junction classification and name, you can query on the internet..
- Q:What does pipe joint "DD" mean?
- The strengthening pipe joint is a medium strength cast iron, which has good casting performance, simple process and small casting stress
- Q:Hot melt pipe joint leakage how to do?
- 2, dry leakage parts, with Wang Yu (waterproof cement) to buy. Less water, very thick situation, large surface paste in the water leakage position. This method is also used to remedy cast iron pipes.
Our high-quality products are widely used in petroleum, chemical, metallurgy, electric power, ship, natural gas, and pipeline industries. We have gained a good refutation among users. At the same time, our products are exported to Europe, the United States, the Middle East, Africa, and Southeast Asia, as well as other countries and regions.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||15.00% North America
15.00% South America
15.00% Eastern Europe
15.00% Southeast Asia
10.00% Mid East
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||10,000-30,000 square meters
|No. of Production Lines
|Product Price Range