Stainless Steel Coil 309S in Stock with Low Moq
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 5000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Stainless Steel Coil 309S in Stock with Low Moq
stainless steel coil
1.Length: 1000-6000mm
2.Thickness: 0.3-100mm
3.Width: 1000-2200mm
SGS,BV,TUV,ISO
STAINLESS STEEL COIL
Thickness | 0.1 mm-100mm |
Width | 1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm |
Length | 2000mm-6000mmor as customer request |
Standard | ASME, ASTM, EN, BS, GB, DIN, JIS, etc |
Material | 201, 202, 301, 321, 304, 304L, 316, 316L, 309S, 310S, 410, 430, etc |
Surface | 2B, BA, 8K, No. 4 No.1 |
Mill: | TISCO, LISCO, BAO STEEL |
Packaging | Standard export sea-worthy packing |
Technique | Hot rolled / cold rolled |
Delivery time | 10-25days |
Supply ability | 700 metric tons/ month |
Payment terms | L/C, T/T |
Application range | Foodstuff, gas, metallurgy, biology, electron, chemical, petroleum, boiler, nuclear energy Medical equipment, fertilizer, etc. |
Note | We can produce other standard as the customers' requirement |
Product Details:
Cold Rolled and Hot Rolled:
Packing and Loading:
FAQ:
What are we supplying now?
We are specialized in producing stainless steel coil, stainless steel (plate/sheet), and duplex stainless steel for a
prelonged period. We are currently doing grade of steel of 201/202,304/304L, 310S/309S/316L/316Ti/321,410/4
20/430/444/443/409L, and 904L
2. How Many years experience do we have?
We have been exported to more than 20 countries in the past 15 years.
3. How long do we usually reply your request?
We always reply our customer within 24 hours.
If you have any question about stainless steel sheets,donot forget to sending the email to Us! You will get the competitive Price and have a very good experience about the Buying Process! CNBM International Corporation is always your trustful friend!
- Q:Is food contact stainless steel and food grade the same concept?
- There are some differences, but in general the food grade will be a bit better, usually when the stainless steel tableware, preferably 304 stainless steel
- Q:Can stainless steel containers hold no salt?
- It is called "stainless acid resistant steel", and it is also called "stainless steel", which has weak corrosion resistance, such as air, steam and water.Stainless steel, however, is not corrosion resistant in all cases. In brine, stainless steel can also be corroded, lose its shiny appearance, and have potential safety problems.Therefore, stainless steel tableware should not be soaked in salt water. After use, clean and dry with detergent.
- Q:What's the advantage of hairline stainless steel?
- Hairline stainless steel plate because of its decorative effect and corrosion resistance are much better than ordinary stainless steel, the wear resistance and anti scratching, scrub resistance is also very strong, processing properties and other aspects of performance are the same, and ordinary stainless steel so it will become a substitute for ordinary stainless steel products, all use stainless steel industry into.
- Q:Does the alloy steel include stainless steel?
- The alloy is two or more than two kinds of material (at least one is made of stainless steel, metal) has a brightness close to the surface of the mirror, feel tough cold, belongs to the avant-garde decoration materials, in line with the aesthetic sense of cool metal age.
- Q:What is stainless steel AB board?
- You should say that BA (Bright, Annealing, bright annealing) plate, and 2B plate is different from the annealing process is different, 2B using annealing and pickling combination process, BA using hydrogen protection, anaerobic annealing. The rolling process and leveling process of the two surfaces are also different.
- Q:D2 steel and 1040 steel made of knives which is good, sharp, retention and impact resistance what?
- 1040 is medium carbon steel. D2 is stainless steel. Sharpness and retention after quenching, stainless steel is not comparable to carbon steel. Because carbon steel is much thinner than stainless steel. As for the overall strength, you should not consider it if you use partial hardening. Remember, the best steel for knives is pure carbon steel such as 1040.1060.1095. Sharpness. Retention. The strength of the knives is better than they are. 1040 represents its carbon content is zero point four percent. 1060 is zero point six percent, and so on. The number of the more hard, more sharp. But it's more brittle if you don't handle it well. Now, knife maker in order to yield, and beautiful, with the knife people do not bother to take care of, maintenance tools, all love to use stainless steel, boasting stainless steel, more than cattle. If you're too lazy to maintain the tool, use d2. D2 is pretty good in stainless steel, too. I suggest you use 1060 partial hardening. 1040 quenching control is not good, then may be partial soft, 1095 may be partial brittle. If you do a knife Laoniao also doesn't matter, steel is not a problem. In short, stainless steel is not recommended. Maintenance is really poor, the edge is too slippery, cutting ability is not comparable to carbon steel. Of course, if you're too lazy to grease the knife, rub the knife every other week. Then you use stainless steel, D2, compared to other stainless steel, or a certain degree of retention
- Q:Stainless steel tableware is fading, what's the matter?
- Is 304 stainless steel, stainless steel may be the quality is not good, the market often take 201 stainless steel shoddy, the quality can not be guaranteed
- Q:Can the stainless steel sink of the drawing surface be only used with 304 stainless steel?
- No matter 304 material, it can be made into wire drawing surface. The quality of the material directly affects the appearance of the drawing surface. Feel light, important to look at the whole, such as big brands sink bottom glue is very thin, in fact, the plate is relatively thick.At present, you buy the sink, feel light, it may be the thickness of the plate, primer thickness, noise pad thickness and other factors, with nothing to do with the material, with comfortable on the line.Wire drawing is a surface treatment process.
- Q:Decontamination method of stainless steel material
- Clean without strong base or strong oxidizing chemicals, such as bleach.
- Q:Can 440 stainless steel be used as a knife?
- 440 is martensitic stainless steel, equivalent to the domestic 11Cr17. Because of the high carbon content, the content of 0.95-1.2% is 16-18%, and the content of Cr is high enough to harden. The hardness is up to HRC58.Quenching temperature is 1010-1070, oil cold. Tempering 100-180 quick cooling.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Stainless Steel Coil 309S in Stock with Low Moq
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 5000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
