Stain Steel China Made Sanitary Centrifugal Pump
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Stain Steel China Made Sanitary Centrifugal Pump
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product Parameters of Stain Steel China Made Sanitary Centrifugal Pump
Capacity: | 6.3~400m³/h |
Head: | 5~125m |
Speed: | 2900r/min and 1450r/min |
Power of fitted motor: | 0.55~90kW |
Inler diameter: | 50~200mm |
The max working pressure: | 1.6MPa |
Application Range of Stain Steel China Made Sanitary Centrifugal Pump
1.Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate,
paper making, washing for mining and cooling for equipment.
2.Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc.
3.It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoise, consistency of solid can not exceed 30% of total medium).
Stain Steel China Made Sanitary Centrifugal Pump Features
1. Resistant to acid, alkali, wear and high temperature.
2. High mechanical strength, steady performance, good tightness.
3. Convenient operation and durable.
4. Be able to transport water that under the position it was installed. No need for filling liquid after the first time it was used.
Stain Steel China Made Sanitary Centrifugal Pump Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Picture Show
Why choose us
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q:I posted this earlier but nobody really answered my question . if my water pump is clearly on the serpentine belt I t need to replace the timing chain to get to it correct? The bolts holding the pump in are around it near the timing chain cover but they don't look like they are inside it. the pump is clearly driven by the serpentine so should I be fine not removing my timing belt to fix the pump? its leaking. Also I know you should replace the timing chain+tensioner but I inspected the chain 400 miles ago its properly tensioned the belt is in good condition its a chain it will last the life of the car its not the cheap belts.
- If you can change the pump without removing the timing belt then go for it, you are lucky. I don't replace the tensioner unless it needs to be replaced, usually they last a long time. I replace the timing belts every 60,000 miles, but usually you can go to 80,000 maximum but I don't like to take it to the last minute, not safe.
- Q:Can I install a recirculating hot water pump to a boiler? Someone just told me that I have a boiler not a water heater, but I have to wait for minutes for the shower to heat up
- Yes
- Q:Weap seal is starting to leak and getting some noise from the water pump. These cars are not as easy as a 1969 Camaro to change the water pump. Can you please give me some guidance? Thx in advance.
- 2001 Chrysler 300
- Q:Plumber quotes installing system using cross-over valve which some way ties the recirculation through the cold water pipes. This sounds like a short-cut. Are there any disadvantages to this system?
- what your plumber is installing is a pump and temperature sensor under a sink , hopefully the furtherest from the water heater. what it does is sense when the hot water temp drops below a certain point, at which time it pumps the water into the cold line until the temp rises again.. the obvious advantage being , not having to wait a long time at the faucet for the water to get hot.. the also obvious disadvantage being electric consumption.. not only for the pump and controller , but also with the water heater clicking on a little more often.. not a lot of expense but a balance against convenience..
- Q:Two sewage pumps switch from each other, start with float switch control, the first sump, when the water is full, the first start, the second rotation to second units start, so the cycle of alternating
- Can add time delay relay, the key depends on how much time the water is full, if you design is automatic, it is better to use the triode reliable,
- Q:The water burst how to repair?
- The general water burst positions for the pump body, pump cover, if not very serious welding can be used to trap, at which point the attention electrode material, most of the water pump are cast iron, so the welding difficulty is not small.If it has become deformed or has split into parts, replace it.
- Q:Can a car turn off due to a water pump. I am thinking of buying a car that the water pump needs to be replaced, everything else in the car its fine, it turns on lovely but after a little while it turns off, the owner says its because of the water pump. is this possible?
- What's the make and year of the car? If the water pump is bad the car would overheat, not just shut off edit: If the water pump needs to be replaced the car should be overheating. There has to be another cause for the stalling, perhaps he meant to say fuel pump? or filter? Sounds a bit sketchy to me, have a mechanic check everything for you before you buy it, and if you get the water pump changed get a new timing belt while you're at it. I wouldn't pay more than 500 for it from what I've heard. If you can't do the work yourself you're gonna be looking at some huge mechanic bills. You could definitely find a car for a 1000 that wouldn't require any immediate repairs
- Q:does anyone know the proper way to take the lower gearcase off and install a new water pump kit. it is a 1986.
- This is a simple repair but I'd recommend that you get a service manual, ether a factory manual or one of the generic Seloc manuals. The key things to do are mark the trim tab so you can put it back in the same position after repairs. Drain the oil. Removing the bolt that is in the hole at the back end of the upper housing, as well as all the obvious Nuts. both above and under the cavitation plate. Put the drive in forward gear, which takes the tension off the shift shaft. Once all the nuts and bolt are loose. Jiggle the drive and it will separate from the upper housing. You now have access to the water pump housing. Remove the housing and pull it up and off the d. Shaft. Inspect fully and account for missing impeller blades. When you re assemble Lube the impeller and put the drive key in place and put the impeller in place. Slide the housing down to the impeller. You can use ether th drive shaft or the propeller to turn the drive shaft in a clockwise direction as you apply pressure on the housing, It should slide down over the impeller. Reassemble in reverse order. Slide the drive shaft up into the upper housing turning the D. shaft using the prop to turn the shaft. Watch the water tube slip into the guide tube. Once it's in place put a couple nuts on then check the gear shift to make sure it goes F-N-R. Bolt up and fill with oil. Good Luck!
- Q:i installed a new pump don't know how to increase water pressure and to what what pressure it should be set
- This is very simple i would sugest the pressure to be set betwene 60 to 70 NO MORE THAN 70. 1. turn off power to pump (ether the circut breaker or a switch near the pressure switch) you dont want to weld the wrench to the switch. 2. remove the cover to the pressure switch its self (usly one #2 phillips screw) 3. now you will see 4 wires under some sloted screws nearest to the front of the switch, behint that is 1 or 2 bolts with a spring and a nut. 4. if you see 2 bolts you will want to turn the nut on the larger one to the right. you will want to tighten it about 1 to 2 full turns. (the same goes if there is only one bolt also) 5. now open the valve that is on the tank untill you here the switch click. then close the valve. 6. turn the power back on tio the pump and watch the pressure gauge on the tank. i DO NOT RECOMEND MORE THAN 70PSI. 7. if it goes over the pressure you want repete steps above exept loosen the nut in about 1/4 to 1/2 turns untill you reach the desired pressure 8. if it does not reach your desired pressure then you do the same thing exept tighten the nut in 1/4 to 1/2 turns untill you attain your desired pressure. 9. when the pressure is reached, replace cover so you dont risk rusting the contacts. if you need more help feel free to email me. and i will assist you in any way that i can.
- Q:removed my water pump to replace it. i have the fan and clutch assembly still attached...i have no idea how to remove these...the fan clutch has bolts that hold the fan to it...and i did remove those but im just not sure how to separate this assembly...my water pump pulley has 4 holes...and no bolts so i presume it's pressed on...and there looks to be a very large nut between the pulley and the fan/clutch assembly...any help would be appreciated on this...i'd much rather go to the parts store w/ the old pump instead of guessing.....thnx in advance...
- I,m with JOHN R in this one, confirm your radiator fan seize is working and not purely unfastened wheeling all of the time and additionally confirm that there is no air trapped interior the cooling gadget.With engine off crack a heater hose unfastened close to the heater center and pour anti freeze in until it starts to return out the disconnected hose. And the cooling fan could become noticeably louder whilst the engine is heat and in case you shut the engine off it is going to experience stiffer to coach than it does cool. sturdy success.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Stain Steel China Made Sanitary Centrifugal Pump
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords