Solvent Acrylic Adhesive DS-90H Double Sided Tissue Tape

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

CONSTRUCTION:

Carrier: Tissue paper

Adhesive: Solvent based acrylic

Liner: Silicone release PE-coated paper, white colour.

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + tissue): 90 ± 5 micron

Initial Tack (14# steel ball): 100mm

Peel Adhesion (Kg/25mm): 1.6 ± 0.2Kg

Holding power: 150 min

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll1.02 x 1000m; 1.24 x 1000m

PackagingWrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What's the chemical composition of the double adhesive?
The double-sided adhesive on the surface coated with a layer of adhesive.The wide application of polymer as adhesive
Q:Construction method of butyl adhesive tape
Single sided non-woven fabric, Yongxing adhesive tape, method of use(1) after the lighting board is installed on the frame, the lighting board seam will be bound and the parts of the adhesive tape will be wiped clean.(2) open the adhesive tape in the joint of the lighting board, then tear off the insulating paper on the edge of the compacted adhesive tape, and then install the aluminum alloy board on the lighting board. Secure with a waterproof screw.(3) on the lighting board and the wall joint, use one side aluminum foil adhesive tape to bond directly. 1, construction requirements(1) the performance indexes of tapes should be read carefully before construction so as to be suitable for the environmental temperature and humidity during construction.(2) according to different waterproofing membrane, different construction methods, choose different types, specifications of different sizes of Yongxing tape.(3) before construction, the quality of the aforesaid project shall be checked and accepted, and the waterproof layer shall be constructed after qualification.(4) according to the requirements of the engineering design and construction waterproofing, waterproofing and leveling layer bonded firmly, do not allow Konggu phenomenon, after the construction of waterproof layer should be protected.(5) the use of Yongxing parapet should pay attention to the tape, brick or concrete surface bonding parts of the firm and smooth surface, such as the poor, the application of cement paste for repairing yarn
Q:In the production process of cotton double-sided tape winding unevenness is what reason
Equipment tension adjustment, receivable situation, tightness, tension.
Q:Double sided tape how to cut it, master with automatic cutting table cut out
First, the gap between the paper tube and the tube shaft is larger, so that the adhesive tape is generated during the rotation. Two, the number of yards is too large, 6MM width is best not more than 30Y.
Q:How do you remove the double adhesive tape on the towel?
3, can also use the heating way to make double-sided adhesive glue softening: with a hair dryer blowing it to viscose softening, when double-sided adhesive adhesion is weak, can be removed more easily. If there is a little trace, wipe the varnish with the varnish to clean it.4, in the removal of time, whether to use light water or vinegar, must let these supplies completely soaked double glue mark, can be effective and effective removal!
Q:What's the effect of double-sided adhesive?
It is made up of three parts: base material, adhesive and isolating paper (film)
Q:What is the relationship between the temperature of the double adhesive tape and the force of the adhesive tape?
If the material is relatively heavy, dangling may lead to bond failure
Q:Which is more sticky, the double adhesive oil glue and the hot melt adhesive?
The same thickness of hot melt adhesive: initial viscosity, viscosity, oil viscosity: initial viscosity is weak, but good adhesion. The price of gum is expensive.
Q:What are the main types of tape?
According to the scope of application division can be divided into:Warning tape, carpet tape, electrical tape, protective film tape, winding tape,Sealing tape, die cutting adhesive tape, etc..
Q:What adhesive tape is used on the heating wire on the electric blanket?
We have this paper double-sided tape, special tape. Ningbo aicotor adhesive products specializing in the production of acrylic foam tape series, VHB tape

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range