Solar PV Panel 310W Polycrystalline Solar Module

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
200 pc
Supply Capability:
26800 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Solar PV Panel 310W Polycrystalline Solar Module


Some recent solar module designs include concentrators in which light is focused by lenses or mirrors onto an array of smaller cells. This enables the use of cells with a high cost per unit area (such as gallium arsenide) in a cost-effective way.

Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. Most solar modules are rigid, but semi-flexible ones are available, based on thin-film cells.


Specifications:

solar panels from 5W--300W, made of TAIWAN MOTECH brand cells,with CO in TAIWAN,Mono and Poly with VDE,IEC,CSA,UL,CE,ISO.

We import solar cells from Taiwan Motech brand, with this CO in taiwan and our CSA certification,we can still sell goods to Anti-dumping areas like USA. Our main products are solar panels, off grid and on grid solar home systems , solar street lighting systems, solar water heating system,solar pump,solar attic fan, solar DC LED lights and solar DC refrigerators.

Certificates : ISO, CE, VDE IEC, MCS, CSA-UL, CEC.
Delivery time: sample 10days, order 25-30days.
Sample: charged.
Payment term: T/T 30% as deposit, 70% before shipment. Or irrevocable L/C at sight.
Trade term: FOB Shenzhen or CIF destination seaport or Airport.

Characteristics:

I.Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.
II.Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.
III.EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
IV.AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.
V.Junction box: Multi function junction box with water proof.
VI.Long lifetime:
25 years; Less power decrease.
VII.Good performance of preventing from atrocious weather such as wind and hails.
VIII.Resisting moisture and etching effectively, not effected by geology.
IX.The certificate issued by international authority: UL, TUV, IEC, VDE, CE.
 

Quality and Safety

1. Rigorous quality control meets the highest international standards.

2. High-transmissivity low-iron tempered glass, strong aluminium frame.

3. Using UV-resistant silicon.

4. IS09001/14001/CE/TUV/UL  

Warranties

1. 10 years limited product warranty

2. 15 years at 90% of the minimal rated power output

3. 25 years at 80% of the minimal rated power output

Technical date :

ITEM NO.:

Poly 156*156 cell ,60pcs . Power range from   230Wp-260Wp

Maximum Power(W)

230

235

240

245

250

255

260

Optimum Power Voltage(Vmp)

29.4

29.5

29.7

30.1

30.3

30.5

30.7

Optimum Operatige Current(Imp)

7.83

7.97

8.08

8.14

8.25

8.37

8.48

Open Circuit Voltage(Voc)

36.7

36.8

36.9

37.1

37.3

37.5

37.7

Short Circuit Current(Isc)

8.52

8.59

8.62

8.65

8.69

8.73

8.78

Solar Cell:

156*156 Poly

Number of Cell(pcs)

6*10

Name of Solar Cells

Polycrystalline Cell

Size of Module(mm)

1650*992*40/45/50

Cable & Connector Type

Pass the TUV Certificate

Frame(Material Corners,etc.)

Aluminium-alloy

Back sheet

TPT

Weight Per Piece(KG)

19.5KG

FF (%)

70-76%

Junction Box Type

Pass the TUV Certificate

Tolerance Wattage(e.g.+/-5%)

±3%, or 0-3%

Front Glass Thickness(mm)

3.2

Temperature Coefficients of Isc(%)

+0.04

Temperature Coefficients of Voc(%)

-0.38

Temperature Coefficients of Pm(%)

-0.47

Temperature Coefficients of Im(%)

+0.04

Temperature Coefficients of Vm(%)

-0.38

Temperature Range

-40°C to +85°C

Surface Maximum Load Capacity

5400Pa

Allowable Hail Load

23m/s ,7.53g

Bypass Diode Rating(A)

12

Warranty

90% of 10 years, 80% of 25 years.

Standard Test Conditions

AM1.5   1000W/ 25 +/-2°C

Packing

carton or pallet

1*20'

14 Pallets / 316pcs

1*40'STD

25 Pallets / 700pcs

Solar PV Panel 310W Polycrystalline Solar Module

FAQ:

I..Will you focus on the safety of the goods during transportation?

Yes, Safety of the cargo is the primary element that we would consider on transportation.

II..How would guarantee the quality will meet the requirements of your clients?

Before shipment, we will have inspection for each batch of goods.

III..What certificates do you have?

IEC,UL,TUV,CSA,etc.

IV..Can you do OEM according to clients’ requirements?

Yes, we have our own brand while we can provide OEM service.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:A good brand of solar panels for my house?
You don't say what you are doing. Are you trying to get electricity from them and need solar photovoltaic panels or are you trying to run a heating or hot water system and need solar thermal panels. It is unfortunate that both of these are known as solar panels as they are really two entirely different designs. Currently the solar thermal panels are more efficient and therefore have a quicker pay back period usually measured in lower single digit years while the photovoltaic panels have paybacks that are sometimes more than double that unless you figure in increased property values and state and federal subsidiaries and tax credits where available. Edit: Recent advances make any current investment in photovoltaic panels likely to be obsolete in 5 years. Still someone has to be on the cutting edge. Two currently available technologies are concentrating the sun's rays within the collector on a much small chip area.2 This improves the efficiency and lowers the cost as concentrators are cheaper than chips. The other option is newer chips that accept a wider spectrum of solar energy.3 This has the potential advantage of producing more energy on cloudy days. This may not be so important in your situation. Balanced against cutting edge technology will be the possibility of getting older panels at a less expensive cost. The bottem line will always be pay back period. More panels at a lower efficiency and cheaper price will be just as good as high efficiency at a higher price if the numbers work out. 4 Between two answers here you now have a criteria for selection and some recomendations. Good luck with your project.
Q:how can i build a solar panel?
Have okorder.com . This can surely guide anyone!
Q:What is the principle of solar panels work?
Solar power generation There are two ways of solar power generation, one is the light - heat - electricity conversion, the other is the optical - electrical direct conversion.
Q:background of solar panel?
Photovoltaic cells work because of the photoelectric effect. However, a solar panel can actually be using several different technologies that have the same common effect of generating electricity when the sun shines on them.
Q:Best orientation for my solar panel?
Typically, solar panels are installed facing the same as your latitude = 2 degrees to the North measured from horizontal. 60 degrees from vertical = 30 degrees from horzontal will give almost as much power in June as in December = beginning of Summer. You can face your panels straight up = zero tilt from vertical = better for December/ not so good in June. Usually, the same tilt as your North facing roof is best as it simplifies installation and reduces wind loading. Shade from trees etc will much reduce the power you get. Neil
Q:Solar Panel House?
U can get solar panels on OKorder stores rather online or else where on yahoo store online and u have to put the solar panel on every spot on the roof.
Q:Linking multiple solar panels?
It will not hurt the panels to hook multiple ones in parallel (all red or positive wires together, and all black or negative wires together), and connect it to the single port on your charge controller. The more alike the two panels are, the better this will work. With two absolutely identical panels, you should get twice the power. With mismatched panels, somewhat less. This arrangement will not hurt the charge controller, either. The worst that happens is that the controller isn't able to take full advantage of all the power available. By the way, it's not advisable to connect both solar and wind together.
Q:What is maximum system voltage in solar panel?
Contact the manufacturer of your panel(s) for the information you seek
Q:Need Solar Panel Guru.....?
I'm inferring that your goal is to save money. You're on the right track with your energy star appliances - saving energy is far better than installing solar panels to cover energy that will be wasted. You may have an opportunity with solar hot water - you would need a large storage tank with 3 people, but that would be the best use of your roof in my opinion. Check with a professional installer, it may make financial sense. Although you could make your own heating panels, it's hard to make a solution as durable as commercial panels. And if freezing is an issue in your area, you would have to drain a homemade system in the winter. With an evacuated tube commercial system, you could keep running right through the winter. In the summer, instead of running those expensive air conditioners, could you just have a cool room in the basement? Anyone who wanted privacy could still go to their regular room and run fans. We have no A/C in our house, and manage, even on those 00+ days. Sounds like awnings or other window coverings might be a big help for you, at least until you can get some deciduous trees in to shade the house in summer. I would advise against making your own solar electric panels. They would not save money over the long term. And check panel prices - they have dropped 50% this year, according to a recent Newsweek article.
Q:Solar power panels?
It sounds like you nor anyone at your home knows enough about solar to be able to hook them up no matter what type they are. I have to agree with others that they could be hooked up and you just can't see the connections. So the best thing for you to do is get a contractor to come out and check them out. It don't have to be a Solar Dealer because I am a dealer and I use electrical contractors to do the installs. A solar dealer is not always legal to install and normally do like I do and just design and sell the systems. However most any dealer can easly install a solar power system because they are trained just not legal to do the work. Having someone other then an electrician work on it could void the warranties.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range