solar pv cable 6mm2 0.6/1kv low smoke zero halogen flame retardant pv cable
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
solar pv cable 6mm2 0.6/1kv low smoke zero halogen flame retardant pv cable
1.sheath
2.Conductor
3.Insulation
Structure data of cable
Nom. Cross-Section of conductor/mm2 | Conductor structure/piece/mm | Conductor diameter/mm | Product diameter/mm | Max direct resistance (20℃Ω/km） | Referencen weight kg/km |
1.5 | 30/0.25 | 1.58 | 5.08 | 13.7 | 33.4 |
2.5 | 50/0.25 | 2.04 | 5.54 | 8.21 | 46.2 |
4 | 56/0.30 | 2.59 | 6.19 | 5.09 | 65.8 |
6 | 84/0.30 | 3.4 | 7.00 | 3.39 | 92.4 |
10 | 84/0.40 | 4.5 | 8.90 | 1.95 | 157.4 |
16 | 126/0.40 | 5.55 | 10.35 | 1.24 | 225.8 |
25 | 196/0.40 | 6.92 | 11.92 | 0.795 | 329.4 |
35 | 276/0.40 | 8.7 | 13.9 | 0.565 | 445.1 |
Photovoltaic Cable
Introduction of product
Our company produces Photovoltaic Cable which is used in advanced radiation cross-linking technology and used low smoke zero halogen flame retardant material produced wires. It has advantages of high temperature resistant, anti oxygen pumping, uv resistance, resistance to water vapor, antimicrobial, short cutting ability, long service life, wear-resisting, oil, anti-corrosion, high tensile resistance, etc.
Executive standard
The product is according to the standard of TüV 2PfG 1169/08.07.
Application
The product is suitable for use in extreme weather conditions, indoors and outdoors solar photovoltaic system circuit connection.
Operating characteristics
U0/U
U0/U 0.6/1kV
Operating temperature
Max. operating temperature of conductor: 120℃, Operating ambient temperature: -40℃～90℃.
Type name
Type | Name |
PV1—F | Low smoke zero halogen radiation XLPO insulation low smoke zero halogen radiation XLPO sheath pv cable |
Specification of cable
Type | Nom. Cross-Section /mm2 | NO.of cores |
PV1-F | 1.5 | 1 |
PV1-F | 2.5 | 1 |
PV1-F | 4 | 1 |
PV1-F | 6 | 1 |
PV1-F | 10 | 1 |
PV1-F | 16 | 1 |
PV1-F | 25 | 1 |
PV1-F | 35 | 1 |
- Q:I just bought the 8800gt, but i don't have the cable to connect it to the power supply.So what cable do i need ??I found those but i am not sure
- If you want to find out what cables you need there are two ways. 1. check the manual or guide that came with the device to see if it says what cables you need. 2. take the device with to a hardware or electronics store and ask the clerks there to help you find the right cables for you're device.
- Q:The specs say: 350 Watts, DC 12V, 100-240V. It is a Rackable server.Are there special / different power cables to use with servers than desktop PCs?Where can I find the power cable with the above specs. I tried OKorder with not much luck.
- Nope. A 350 watt supply comes nowhere near drawing more than an ordinary household 15 AMP circuit can carry (about 3 AMPs at full load). Actually, rack-mount systems often draw less power than standard desktop systems if they are engineered correctly. An ordinary 3-prong plug (like those sold on all desktops in the US) will do just fine. As a rule of thumb, if the cord feels warm, consider a larger size.
- Q:Acoustic Audio 10 inch home theatre powered subwoofer use speaker wire or subwoofer cable?
- As you used the phrase The wire that was included for the subwoofer, I'll presume that we're talking Home Theater in a Box here. As someone above mentioned, sub frequencies can use a lot more energy. In a larger system where you are consistently running several hundred watts over longer distances, a larger wire would probably be benificial. For a HTIB system such as yours the wire that came with it would be more than adequate over the short run that would typically be needed. Having said that, there is nothing wrong and nothing will be damaged by going to a larger gauge wire. Just not a lot of benefit.
- Q:My setup is an alpine MRX-M100 powering 2 alpine type R 12's on 4 ohm, and also an old eclipse PA 5422 speaker amp. The main thing is I have 4 gauge running from my battery to my amps, but I have this sort of distribution block that turns the 4 gauge wire into 2 8 gauge wires. I know that this probably isn't the best for the MRX-M100, but it's all I had or what I could afford at the time. The main thing I wanted to ask was is this bad for the amp, and what would it be like if I had 0 gauge coming off the battery so then it would be 4 gauge going to the amps? Would it be louder? Could I turn it up higher? because right now if I turn up the volume past a certain point the subs will just stop playing. If I just shut off my head unit and turn it back on they start up again. Your thoughts and recommendations would be appreciated!
- okay alot of 4 gauge amp kits are not legit 4 gauge ive seen some more like 10 gauge of actual wire if you have legit awg wire you should be fine but you should have another 4 gauge strand to the alpine amp Id also recommend the big 3 upgrade your power will be increased greatly... if you want to run a 0 gauge you can but you could also just run another 4 gauge wire also make sure your grounds are sufficant because they shouldnt shut off either way
- Q:Hi,I have just bought a jasper xbox and i know this as it says ''12V, 12,1A'' on the back yet my power cable says ''12V, 16,5A''.I thought that the jasper xbox requires a specific power connector which wont fit the other types. Mine seems to fit fine, so have i got something wrong here? Cheers
- i don't know if somethings wrong with your xbox or power brick but i can tell u tho, if u use a Xenon power brick (12V,16,5A) on a jasper xbox u will run into a problem later on, for it will overheat and the CPU and GPU will warp and pull there self away from the motherboard, if u have ever heard of the towel trick( wrapping your xbox in a towel so it will overheat and the solder will pool up and re-solder the CPU/GPU back in place) that's where it come from, i would buy a jasper power brick if i were u (12V, 12,1A).
- Q:my MOBO has a 4 pin connector, but my power supply came with an 8 pin power cable, so what do i do? Also my MOBO has a SATA1 slot by itself, and two SATA slots called SATA 2 and SATA 4. The SATA 1 is by itself, and SATA 2 and 4 are next to each other. so which SATA slot do i plug opticaldrive and HDD in?
- This is about power connector -
- Q:the contant power cables go to my car alarm, led lights, siren, power locks, power windows, and alarm bypass... they are very small thin awg wires... the ignition and constant power cables under ignition housing are alot thicker... is this possible with no problems?
- I wouldn't tap into any wires where your alarm is.. If you have any issue, it could arm your alarm, and you might not be able to start your car, until the wiring was fixed...
- Q:I'm running a 3ghz ecs p965t with 2gb of RAM, and I'm trying to install an XFX 8800GT. First time I tried it, it didn't power on at all, and I figured it might be the power supply (mine was a 350w) so I tried a friend's 450w, still no power. So I went out and bought a 500w, and STILL no power. Wierder still, if I leave the card plugged into the board but don't plug in the power connector, it makes a long high-pitched wailing sound but the system does power itself.I'm assuming it must be a problem with the card itself, but does anyone have any other possibilities I could try before negotiating a replacement in PC World?
- I think its the card. This is not uncommon. Card sounds DOA. Exchange it. 500 watts is good, the others are not, but lack of power would not kill a card, I don't believe. good luck. 8800GT is a sweet card, thats what I have, I play at 1920x1080 and get between 40 and 60 FPS in far cry 2 and great frames in oblivion maxed out. I get around 30 in crysis on high.
- Q:Will the wire and cable industry belong to the power industry? The
- Suggestions or online shopping it Feeling very difficult to match the silicone sleeve, the Internet is very easy to buy, about 10 yuan or so, C430. I just bought a Taipower c430 last month, did not buy silicone sets, bought a Moog MP4 package, that with a silicone sleeve machine becomes ugly. Hope to help the landlord.
- Q:Ok, my pc and monitor have the same socket for a power cable, and i mixed the two cables up, but one has a 5 amp fuse and one has a 10 amp fuse... What one goes where??
- put the ten amp on monitor, but doesn't matter either way is fine.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
solar pv cable 6mm2 0.6/1kv low smoke zero halogen flame retardant pv cable
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
