Solar Panel Solar Module PV Solar With UL TUV Certificates 320w

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 watt
Supply Capability:
10000000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Polycrystalline Silicon Max. Power(W): 320 Number of Cells(pieces): 72

Product Description:

Solar panel material

1. glass

 Its main role is to protect the power generation ( solar cells ) , there is a selection of light transmittance requirements : 1 ) must be high transmittance (typically 91% or more ) ; 2 ) super white steel processing.

 

2. EVA

 For bonding glass and power generation fixed body ( such as cells ) , transparent EVA material directly affect the life of components exposed to the air EVA prone aging yellow , thus affecting the transmittance components , thus affecting in addition to generating the quality of the components itself, the quality EVA lamination process on the component manufacturers is also very large, such as EVA plastic viscosity of non-compliance , EVA and glass, back bonding strength is not enough, can cause premature aging EVA, the affected component life.

 

3. Solar cells

 The main role is to generate electricity , the electricity is the main market mainstream film crystalline silicon solar cells , thin-film solar cells , both have their advantages and disadvantages . Crystalline silicon solar cells , the equipment costs are relatively low , but the high cost of consumption and cells , photoelectric conversion efficiency is high, the next generation in outdoor sunlight is more appropriate ; higher thin-film solar cells , the relative cost of equipment , but the cost of consumption and battery low, relatively low photoelectric conversion efficiency of crystalline silicon solar cells , but the effect is very good low-light , in the ordinary light can also generate electricity , such as solar calculator .

 

4. backplane

 Sealing, insulation , water ( usually with TPT, TPE , etc. ) the material must be resistant to aging , component manufacturers generally have warranty for 25 years , tempered glass, aluminum is generally no problem , the key lies in whether the backplane and can meet the requirements of silica gel.

Solar Panel Solar Module PV Solar With UL TUV Certificates 320w


PERFORMANCE

- High effi ciency, multicrystalline silicon solar cells with high transmission and textured glass deliver a module effi ciency of up to 16.0%,

minimizing installation costs and maximizing the kWh output of your system per unit area.

- Tight positive power tolerance of 0W to +5W ensures you receive modules at or above nameplate power and contributes to minimizing

module mismatch losses leading to improved system yield.

Structure of Polycrystalline Silicon Solar Panel Type 

Solar modules, which are widely used in ground mounted utility-scale PV plants, large-scale and small civil and commercial power generating system such as BIPV combined to the grid, roof-mounted PV power system, rural electrification, communications, emergency auxiliary power.

Solar PV module is comprised of some solar cells which are connected in serial with high efficiency and enhanced reliability. 

 

Advantages of Monocrystalline Silicon Solar Panel

• CNBM Solar performance guarantees for 25 years

• 12 years guarantee for workmanship

• Timeliness of delivery

• Quality Products certified (TÜV, UL, CE, VDE, ISO)

CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel supplier in China, we strive to provide our customers with excellent service, superior products and unmatched value.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How much power does the solar panel produce?
I also doubt your claim of 4% efficiency. That strength solar panel is brand new technology (this year) and is not available in retail sizes yet. You probably got duped by some false marketing... In any case; even assuming you had a 4% solar panel, there are too many things for us to give you an accurate assessment of the power production. Clouds, location on earth, season, angle of the solar panel; these are all things we need to know to calculate it. Odds are it should have the average rate it produces electricity written on the back panel or with the instructions that came with it. I know of no solar panel retailers that do not also offer free installation. You should get your money back or get that free installation (and then you never have to worry about how much power it has, it just gets you what it can).
Q:What is the real cost of Solar Panels?
They don't sell them by the square inch. It costs about $0 per watt of generating capacity. Unless you are connected to the grid you will need a battery bank to storage power for rainy days. As for the effects of weather ... you can probably make a cover out of plywood... but if your house blows away the solar panel goes with it. Before you buy one make sure your insurance covers it.
Q:Solar panel help please?
Solar water heating is low technology. There are do it your self plans for it all over the internet. There is no electricity involved. Simply laying a garden hose on the ground in the hot Sun can heat the water to really high temperatures. Just have a shutoff nozzle on the hose, turn on the tap and open the nozzle until water comes out and then close the nozzle at the end of the hose. Let the hose full of water sit in the sun for an hour or so and then open the nozzle and feel how hot the water is that comes out. Be careful, because it can be so hot you can get a burn! When the gallon or so that can fit in the hose has all come out and is replaced by other water from the tap, it will feel cold again. Close the nozzle and wait another hour to heat it up again. A solar hot water heater is just a very long coil of pipe in the Sun, maybe with a pump to slowly circulate water from a holding tank so you can make and store more hot water that fits in the hose. Solar electric power is completely different. It uses semiconductor devices called solar cells to make electricity directly from light. Many of solar cells are usually arranged into large panels to make larger amounts of power. In electricity, Watts = Volts * Amps. Battery capacity is usually measured in Amp-hours. Small solar panels are often designed to produce electricity at 2 volts. A 60 Watt, 2 volt panel makes 5 Amps of electric current, because 2*5=60. So if you use it to charge a 2 volt battery with a capacity of 5 Amp-hours it will take hour to charge. A 0 Amp-hour battery would take 2 hours to charge with the same panel.
Q:I have two ARCO M55 solar panels. What do I need to connect to a 2Volt bank of batteries.?
This Site Might Help You. RE: I have two ARCO M55 solar panels. What do I need to connect to a 2Volt bank of batteries.? Do I need some type of regulator when the batteries are fully charged.? The Arco Panels voltage is approx 7VDC at 2.5 amps, Should I limited the voltage to 4VDC??. I would like to connect both panels to up to five batteries at one time...??
Q:Why are solar panels only 0% efficient?
intense frequency waves alongside with x-ray or UV are additionally particularly intense lively while in comparison with the soak up-ale wavelength (which i think is many times infra-pink). so if we are able to make panels that soak up those wavelength rather of the warmth of infra-pink waves, we'd in all danger be getting a lots larger performance than 0%. desire it helped
Q:What is the best solar panel?
your initial outlay for a solar panel is very large in terms of output.......somewhere around $4 a watt......ie you want a panel that will run a 00 watt lightbulb? $400.00 please. enough panels to collect enough energy to recharge a battery bank to run the house overnight? well, I've been doing a lot of research for my condo project in St Thomas and it comes out to 0-20,000 US $ for a bedroom apartment. Now, after about ten years you have made your investemnt back.... and there are a lot of government rebate programs that lower the cost.. what I have found is solar is nice, but depending on how far north you live you may only have 4 usable hours of light a day. you may very well be better with a wind generator.wind blows all the time after all...Bergy and SouthWest Windpower make two good small home units...start there
Q:Solar Panels power help?
You have to look carefully at your battery choice. If you use lead-acid, use only the sealed type. Then you need to select a battery charger that is tailored to that battery type. If you want to run 700 watts for 6 hours, that is 0kwhrs. A 200 watt panel will take 50 hours to charge that, probably more like 70 to allow for losses. Even is S CA you don't get 70 hours of sun per day. Even for 3 hours of nite use, that still needs 25 hours of sun. So you need much more than a 200 watt panel. Bottom line, you need to calculate your needs much more carefully. PS, 700 watts is very large. Check it. Are you using all that stuff at the same time?
Q:Using a solar panel to make energy?
Small solar panels produce almost no power that matters to anything. A whole square meter may produce 80 Watts when facing the noon sun in Arizona. take that down to 28 Watts in Erie Pa. The 80 Watts can charge a 2 volt battery at about 8 amps times 6 hours, or 48 Amp hours per day in Arizona or perhaps 5 amp hours/day in Erie. The amount of energy you can save declines as the battery is more charged so you need to use up the power stored before you have more to save. To do that charging you need a circuit that will carry 8 amps, including a voltage regulator. So, if your circuit can stand 20 amps the person in Arizona can run 2 square meters of panel. It may seem strange but the same is true for the person in Erie. The person in Erie has to allow for the maximum output of the panel, not the expected average. The person in Erie will occasionally have really clear skies and put out maximum rated amps. The amperage that the batteries can put out at maximum should not be used. That will destroy the battery. One puts a breaker on each output circuit to protect the circuit and a breaker that limits battery output to 20 amps based on a battery rated at 800 amps. That 800 amps is surge capacity. One or two panels does not really justify having this capacity for battery and circuitry. I can think of using it to provide an emergency LED lighting system.
Q:Solar panel, Home office and Tax write off?
The solar panels are a capital improvement. You can deduct 5% of the depreciable portion of the property as part of the home office deduction. You'd have to depreciate the solar on the same 39 year straight line schedule as the house itself. (The land value is never depreciated so you'll have to break that out separately.) Since this is business use of real estate, the depreciation is over 39 years, not the 27.5 years for residential rental real estate. That crunches out to a whopping $38 deduction per year for the depreciation on the solar panels. ($0,000 x .5) / 39 = $38.46 which rounds down to $38. If you're in a 25% tax bracket, that will save you a whopping $0 in taxes. Keep in mind that when you sell the home, the depreciation allowed or allowable will be subject to recapture. That is taxable income subject to a maximum tax rate of 28% even if you can exclude the gain on the sale under Section 2. For that reason you might wish to consider the safe harbor deduction new for tax year 203. You may deduct a flat $5 per square foot up to 300 square feet for a maximum deduction of $,500. That won't trigger the depreciation recapture (for the years that you use it, you can switch off year for year if you wish) and may reduce the likelihood of an audit as well.
Q:solar panel for computer?
Yes. Basically, here's what you need (I'm keeping this general on purpose): The panels themselves -- how large an area depends on average power consumption and how much power you can get on average. That, in turn , depends on climate. You'd need more in Seattle than Tuscon, for example. I'd guess something in the neighborhod of 0 square feet. Depends also on haow many gadgets (printers, etc.) you have. You'll need a power storage system. Lithium gives you the best poser density (of off-the-shelf stuff) but an ordinary car battery works well and is reliable. And, of course, a control system to manage the power generation/storage/use so everything works together without that annoying smell that tells you you just cooked a few hundred bucks worth of equuipment! :)

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range