Solar Panel Solar Module from CNBM with CNBM Brand

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
1 PCS
Supply Capability:
100000 PCS/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

PERFORMANCE

- High effi ciency, multicrystalline silicon solar cells with high transmission

and textured glass deliver a module effi ciency of up to 16.0%,

minimizing installation costs and maximizing the kWh output of your

system per unit area.

- Tight positive power tolerance of 0W to +5W ensures you receive

modules at or above nameplate power and contributes to minimizing

module mismatch losses leading to improved system yield.

- Top ranking in the “TÜV Rheinland Energy Yield Test” and the

“PHOTON Test” demonstrates high performance and annual energy

production.

RELIABILITY

- Tests by independent laboratories prove that Yingli Solar modules:

 Fully conform to certifi cation and regulatory standards.

 Withstand wind loads of up to 2.4kPa and snow loads of up to

5.4kPa, confi rming mechanical stability.

 Successfully endure ammonia and salt-mist exposure at the highest

severity level, ensuring their performance in adverse conditions.

- Manufacturing facility certifi ed by TÜV Rheinland to ISO 9001:2008,

ISO 14001:2004 and BS OHSAS 18001:2007.

WARRANTIES

- 10-year limited product warranty1.

- Limited power warranty1: 10 years at 91.2% of the minimal rated power

output, 25 years at 80.7% of the minimal rated power output.

1In compliance with our Warranty Terms and Conditions.

QUALIFICATIONS & CERTIFICATES

IEC 61215, IEC 61730, MCS, CE, ISO 9001:2008, ISO 14001:2004, BS OHSAS

18001:2007, PV Cycle, SA 8000

ELECTRICAL PERFORMANCE

Electrical parameters at Standard Test Conditions (STC)

Module type YLxxxP-29b (xxx=Pmax)

Power output Pmax W 260 255 250 245 240

Power output tolerances ΔPmax W 0 / + 5

Module effi ciency ηm % 16.0 15.7 15.4 15.1 14.8

Voltage at Pmax Vmpp V 30.3 30.0 29.8 29.6 29.3

Current at Pmax Impp A 8.59 8.49 8.39 8.28 8.18

Open-circuit voltage Voc V 37.7 37.7 37.6 37.5 37.5

Short-circuit current Isc A 9.09 9.01 8.92 8.83 8.75

Electrical parameters at Nominal Operating Cell Temperature (NOCT)

Power output Pmax W 189.7 186.0 182.4 178.7 175.1

Voltage at Pmax Vmpp V 27.6 27.4 27.2 27.0 26.8

Current at Pmax Impp A 6.87 6.79 6.71 6.62 6.54

Open-circuit voltage Voc V 34.8 34.8 34.7 34.6 34.6

Short-circuit current Isc A 7.35 7.28 7.21 7.14 7.07

STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5g spectrum according to EN 60904-3.

Average relative effi ciency reduction of 3.3% at 200W/m2 according to EN 60904-1.

NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.

OPERATING CONDITIONS

Max. system voltage 1000VDC

Max. series fuse rating 15A

Limiting reverse current 15A

Operating temperature range -40°C to 85°C

Max. static load, front (e.g., snow) 5400Pa

Max. static load, back (e.g., wind) 2400Pa

Max. hailstone impact (diameter / velocity) 25mm / 23m/s

CONSTRUCTION MATERIALS

Front cover (material / thickness) low-iron tempered glass / 3.2mm

Cell (quantity / material / dimensions /

number of busbars)

60 / multicrystalline silicon / 156mm x 156mm / 2 or 3

Encapsulant (material) ethylene vinyl acetate (EVA)

Frame (material / color / anodization color /

edge sealing) anodized aluminum alloy / silver / clear / silicone or tape

Junction box (protection degree) ≥ IP65

Cable (length / cross-sectional area) 1000mm / 4mm2

Plug connector

(type / protection degree) MC4 / IP67 or YT08-1 / IP67 or Amphenol H4 / IP68

PACKAGING SPECIFICATIONS

Number of modules per pallet 29

Number of pallets per 40' container 28

Packaging box dimensions

(L / W / H) 1700mm / 1135mm / 1165mm

Box weight 568kg

Unit: mm

• Due to continuous innovation, research and product improvement, the specifi cations in this product information sheet are subject to change

without prior notice. The specifi cations may deviate slightly and are not guaranteed.

• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types

 Solar Panel Solar Module from CNBM with CNBM Brand


FAQ:What is your warranty system?

For c-Si panel: 25years output warranty for no less than 80% of performance, 10years output warranty for no less than 90% of performance. Free from material and workmanship defects within 5years.

  For a-Si panel: 20years output warranty for no less than 80% of performance, 10years output warranty for no less than 90% of performance. Free from material and workmanship defects within 2years.



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:were can i buy decent solar panels?
From a decent solar panel store. Or you can get on the Internet and look for someone in your area.
Q:how long do roof solar panels last?
Ive been using the same solar panels for 5 years, have move a few times so they last a lot longer than the roofs weve had over us. I am teaching my kids how to build wind generators, because we keep having power failiures when the wind blows. and recently its got very windy. I charge banks of battery's and keep my office running from dc-ac converters.
Q:rooftop pool solar panel leaks?
Depending on the material and operating temperature of the panel, it MAY be possible to fix it very simply and easily by applying Hot Glue Gun adhesive over the cracked area. The high temperature glue gun adhesive melts at approximately 60 degrees Farenheit, and if the collector temperature does not quite reach, or exceed that operating temperature, then that repair method should work. Another possibility is an aerosol spray can product called LeakEnder. This is usually available at your local hardware store, or the major home improvement centers [like Lowe's, Sutherland's, Home Depot, McCoy's, etc.]. After preparing the area to be patched by cleaning, you just spray the LeakEnder patching material on the crack and an eighth of an inch or so around. IF the operating pressure or the collector is very low, it MAY even be possible to patch the leak with nothing more than a narrow strip of DUCT TAPE!!!!! Another possibility, but unless carefully accomplished is to weld the crack with a Soldering Gun and some scrap plastic from packaging material. The problem with this fix is that you must be very experienced in application of heat from the Soldering Gun, OR you will melt a larger hole in the collector tube than the crack was. Regardless of patching method, it is CRITICAL that the cracked area to be patched MUST be CLEAN and DRY BEFORE applying any patching material. Good luck!
Q:i am asking about the solar panels?
First of all, make sure that you are taking readings in the dark (with the solar panel indoors and covered). 0.433 is a reasonable forward voltage for a Schottky diode. Ideally, it diode should read open one way (possibly OL for your meter), and 0.4 the other way. If it's reading OL both ways, the diode is bad. You can either unsolder it or cut it out and verify that it is bad.
Q:What kind of Solar Power panel setup do I need for this?
Unfortunately solar panels are low output,generally only 2 volt and very low amperage,so you would need to build a multi panel array with a DC-AC converter all together costing several hundred dollars which would only work during sunlight.Just roughly figuring,about $800. Plan2-Solar charger,battery bank,and DC-AC inverter so it would work 24hrs a day,also several hundred $$. Solar power does just not seem feasible(to me)in this application.By far the cheapest set up here would be an extension cord fromhouse to the bucket.260 watts per hr is a fairly lightweight draw,even not figuring the thermostat's cycling it on and off as needed.Electricity is sold in kilowatt hours(000W/hr).This bucket would use(not allowing for thermostats control lowering it)appx 6000watts or 6KW per day.Depending on your electrical cost per Kwh it would cost very little to run.(In my location appx 50cents a day) or appx the same amount as my computer(325watts total)) Note that that would be a maximum rate,and would actually be less due to thermostat cycling off and on as needed.
Q:45 Watt Solar Panel Kit Harbor Freight?
This Site Might Help You. RE: 45 Watt Solar Panel Kit Harbor Freight? Exactly How much power will this kit produce? for example. Will it only be able to power the 2 light throughout an entire day or would it be able to power a couple TV's with a couple lights. Or a Refrigerator? washer dryer? I'm just wondering exactly what it will be able to do and if...
Q:Can I get free solar panels?
Try approaching a few power suppiers to find out if they have any scheme or grants available. Or contact a local DIY store/builders merchants and ask if you can have some panels installed and agree to advertising allowing them to let people contact you for your opinion on the panels.
Q:Have a question about mobile homes and solar panels!!!?
My guess is that you will pick up everything concerning solar power at www.okorder.com.
Q:I will like set up a solar panel to cut down my eletricity cost in Cameroon.can you allocate me a supplier?
good idea going solar, i would suggest doing a google search, as their are many suppliers. then you need to calculate the amount of wattage you think these apartment houses are going to require. volts x amps = watts. if you are going to be off of the power grid, then you will need a way to store excess energy during good times,( lots of sun) in order to use it during bad times ( no sun ). or see if you are able to sell your extra power back to your local power company, check because some companies do not allow this. you could even have a generator for emergencies if you go off the power grid. on final note, solar is a pretty sizable investment up front and your profits are seen mainly in the long run, but you will get energy savings immediately, but more likely those savings will go to paying off the solar panels also, you will need a converter to convert the ac (alternate current) produced by the panels into dc ( direct current ) which is used by the apartments. it will tie in to the existing electrical system in the apartments. i know germany is really pushing solar energy and they offer their citizens some pretty sweet deals to go solar. the companies are profiting from this so i would suggest looking for a supplier in germany, first. they may have better deals, or try bp (british petroeum) they have been in the solar business for awhile. i wish you success!
Q:can you hand make a solar panel?
The idea is to hand assemble scrap solar cells that would otherwise be thrown out. At one point in time, very few people would want to do this so you could get the broken solar cells for free but now they sell them by the watt. It's still cheaper than a pre-fabricated solar panel but it's very labour intensive. Technically it's like wiring a bunch of batteries together, you measure the voltage and current a broken cell produces and decide whether or not to wire it in series or in parallel with other cells to get the performance characteristics that you want plus try to fit them onto some kind of structural panel in a fashion that uses the space efficiently. Since your handiwork is likely to be fragile, you'll probably have to put some plate glass on top to protect the cells from the elements, you can also improve performance by positioning fresnel lenses to increase the amount of light on active elements versus inactive areas of the panel.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range