SOLAR PANEL POLY FOR 250W FOR GOOD QUALITY,SOLAR MODULES FOR GOOD QUALITY

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
2600 watt
Supply Capability:
26000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Polycrystalline Silicon Max. Power(W): 260 Number of Cells(pieces): 60

Product Description:

1.Product Description:

 Solar Module is the core part of solar PV power systems, also is the highest value part of it. The function of Solar Module is to convert the sun's radiation to electrical energy, or transfer it to battery and store in it, or to drive the load running.The Product has been widely used in space and ground, it mainly used for power generation systems, charging systems, road lighting and traffic signs areas. It could offer a wide range of power and voltage, and with high conversion efficiency, and long service life.

2. Standard Test Conditions of Polycrystalline Silicon Solar Panel:

Polycrystalline Silicon Solar Modules 48Cell-195W Specification

ELECTRICAL PERFORMANCE

Power output

P max

W

195

Power output tolerances

ΔP max

W

0/+5

Module effi ciency

η m

%

14.7

Voltage at Pmax

V mpp

V

23.7

Current at Pmax

I mpp

A

8.03

Open-circuit voltage

V oc

V

30.1

Short-circuit current

I sc

A

8.65

 

 

Product Description:

This installation Manual contains essential information for the electrical and mechanical installation that your must know before installing CUSTOMER PV modules. This also contains safety information you need to be familiar with .

CUSTOMER does not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of in anyway connected with installation, operation, use or maintenance of the PV modules. No responsibility is assumed by CUSTOMER for any infringement of patents or other rights of third parties that may result from use of PV module.


SOLAR PANEL POLY FOR 250W FOR GOOD QUALITY,SOLAR MODULES FOR GOOD QUALITY



Solar panel working process

In addition to being the ultimate source of all life on earth, the sun is an infinitely renewable, completely pollution-free source of electricity. Instead of burning fossil fuels dug up from the ground in a big power plant – a very 19th century, industrial age approach, when you think about it – solar panels convert sunlight directly into electricity, with no harmful emissions.


Specification of Solar Monocrystalline  Series

- Optimal permutation on solar cells to keep enough heat diffusion, decreases hot spot effect.
- High quality and anti-ageing EVA, weather resistance backside raw materials assure reliable solar panels.
- Passed 5400Pa mechanical loads testing by UL, can withstand bad and high mechanical load working environment.
- With good sealed performance, moisture resistant, aging resistance, high/low temperature resistant, the inner terminals of our junction box owns good electrical performance transmission. Bypass diodes used can avoide hot spot effect and damages to panels. Output cables and mating connectors are safe and reliable for installation application. Adopt weather resistance, sealed, good sticky silica gel when assembling.
- Strict quality inspection on each procedure and 100% electrical performance test to meet power requirements.
- 0~+3% power tolerance.
- classification for all the panels in order to improve the integral performance of system and solar panel life span.
- TUV、UL、MCS、CE、ROHS、Golden Sun certified
- Underwriting of 25years output power warranty by The People's Insurance Company of China.






Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Does anyone know a good company to buy solar panels from?
a few months ago there was an article in pop sci about a company that has started to make solar panels at a fraction of the cost of what they used to be by using a printing style process instead of glass panel style they should hit the mass market soon that would be the best bet for a starting point to beat out price problems to allow a competitive edge they also had a article for low wind high power residential windmills for that could help in the alternative fuel push
Q:Will my 8watt solar panel charge a car battery and how fast?
welcome to the wonderfull world of solar! you probably have a 2Vdc 8 Watt solar panel, to figure out its charging amps capability we do this equation Watts/Volts=Amps 8watts/2Vdc=.5Amps this is a conservative figure, since solar panel ratings are calculated using winter time sunlight, sunny locations and more daytime hours will give you higher amps. a typical good condition car battery is rated at 40Ah (Amp hours).to find out the charge time, we use the following formula; Amp Hours/Amps=T where T is time in hours 40Ah/.5A=26hours this is charge for a single battery, two batteries will double to over 52 hours. lets compare to charging a battery with your car, a car alternator puts out about 60 amps but usually run about half capacity. 40Ah/30amps=.3Hours! An alternator is far more efficient so charging with a small solar panel is best as an alternative or for low power applications. As far as using an inverter to power a TV, we can calculate how long the battery will last by using the original formula. a typical 9tv will use 70 watts 70watts/2Vdc=5.8A 40Ah/5.8A=6.9hours this figure is by drawing all the power from the battery, voltage inverters have a safety feature that will not let you discharge your battery all the way, so 40Ah battery will power a 9 tv for about 4.5 to 5 hours.
Q:Do solar panels float?
They'll float if you tie enough hundred dollar bills to them.
Q:Where can I get damaged solar panels?
When you pass a sign- look at the back of it for a name. Often the company that rented them out will have their name on the back. Call them.
Q:how much money does solar panels save?
Your school spend $0,000 per month or per year?? Photovoltaic (Solar Panel) panels have a really large initial capital investment. If you live in a location (e.g. West Coast Desert, SoCal) where there are many sunny days so you might be able to break even quicker. Also note ,there are state and federal grants that can help ease the capital cost. Energy demand keeps going up so expect our current rates to double. People who have alternative forms like wind and solar will have the advantage when this time comes. Just think of when the US had it's oil crisis in summer of 2008, people with small efficient vehicles such as Prius's didn't feel the price increase like the people who bought cheaper large SUV's.
Q:How to build a small SOLAR PANEL that will light a 60 watt light bulb?
Making your own photovoltaic (solar electric) panel is a nontrivial matter if you want to get 60 watts out of it. If this is a science fair project, there are some possible paths that I'd suggest: ) Make your own cupric oxide panel. With just one square foot, you can harvest perhaps 0.5 mW in bright sun - enough to power a solar calculator; -or- 2) Buy a panel to light your 60 watt bulb. You could probably get away with a panel that is 6 square feet, but would use a car headlight as the lamp. If you wanted to light a regular household bulb, you would need electronics to step up the voltage, and you would lose a sizeable fraction of the energy just in the conversion. -or- 3) Buy broken solar cell pieces, or individual solar cells, and solder them together into your own panel. This is a LOT of trouble, and is a finicky process to get working and keep working. And it may not end up being cheaper than buying a ready-made panel. But you can claim that you made it! By the way, crystalline silicon panels are in the ballpark of 5% efficient, and a 3' x 3' one would produce in the neighborhood of 20 watts.
Q:Anyone who knows or has Solar Panels?
In my experience the snow usually slides off by itself. There have been times when it's snowed heavily and I've had to clean it off but it does not tend to be the norm.
Q:Making a Charger out of small solar panels?
3-T is just one type of many devices designed to control voltage so you get the amount you desire with as little static as possible. Without you having an degree in engineering, I can't explain it to you any better. You will also need to produce true sine wave energy or you will burn out your PSP with the correct volts and amps. You need one to produce only 5 volts 2amps. Anything different will burn out yur PSP. Your problem is simple math. Watts = volts multiplied by amps. Amps = Watts divided by volts. So if your solar panels can produce /4 amp ( 250 mA) each, then you connect one to the other in a series until you get enough connected to make 2A. ( 8 panels { /4mA x 8 = 2A}) You now have a panel with 32Volts, 2Amps, 64 Watts. This is where the T-3 regulator comes in. If you buy one for 5 volts, it will allow only 5 volts 2 amps, to go to your PSP.
Q:Pls is it ok to connect a 0watt and 20watt solar panel together into a charge controller port?
You should specify the controller ratings first. Otherwise it is not possible to answer your question.
Q:does vibration affect solar panels?
clearly. if the panel is moved, its action will be distorted. it should be kept in a level, stable location to reduce likelihood of such events occuring.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range