SOLAR PANEL MTTP SOLAR MODULE WITH HIGH EFFICIENCY

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
2500 watt
Supply Capability:
1500 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Monocrystalline Silicon Max. Power(W): 250 Number of Cells(pieces): 60

Product Description:

 

Product Description:

ABOUT GREEN ENERGY

Energy Holding Company Limited is one of the world’s largest fully vertically integrated PV manufacturers

With over 7.0GW of modules installed globally, we are a leading solar energy company built upon proven product reliability and sustainable performance.

SOLAR PANEL MTTP SOLAR MODULE WITH HIGH EFFICIENCY 

 

PERFORMANCE

- High effi ciency, multicrystalline silicon solar cells with high transmission and textured glass deliver a module effi ciency of up to 16.0%,

minimizing installation costs and maximizing the kWh output of your system per unit area.

- Tight positive power tolerance of 0W to +5W ensures you receive modules at or above nameplate power and contributes to minimizing

module mismatch losses leading to improved system yield.

 

FAQ

We have organized several common questions for our clientsmay help you sincerely

①What price for each watt?

It depends on the quantity, delivery date and payment terms,

②What is your size for each module? Can you tell me the Parameter of your module?

We have different series of panels in different output, both c-Si and a-Si. Please take the specification sheet for your reference.

③Can you provide the peripheral products of the solar panels, such as the battery, controller, and inverter? If so, can you tell me how do they match each other?

Yes, we can, we have two companies for solar region, one is CNBM International, the other is CNBM engineering Co.

We can provide you not only the solar module but also the off grid solar system, we can also provide you service with on grid plant.

④What is your warranty system?


 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Do solar panels float?
With the Oceans rising as fast as they are, I hope so. LOL
Q:Best orientation for my solar panel?
It doesn't make sense to me. I am at latitude 37.7,and my panels face south at about 38 degrees. Yours should be pointed north as you suggest. Being so close to the equator, and in the absence of any better information, an angle of 2 degrees would be appropriate. However, choosing the best angle will greatly to your overall efficiency, so I would try to find a more credible source, How about the folks from whom you buy the panels. They would know precisely. By the way, if you haven't installed the system yet you might consider going to a high voltage system to cut known line losses in the conductors between the panes and the inverter, I did that plus increasing the conductor size over that recommended by the manufacturer. I gained about two percent in efficiency
Q:Easy 0 points? Solar Panels and heaters?
well, I suggest you that Amaze-Heaters are good for you.
Q:How will i construct solar panel?
For powering a something that works on DC, like a gate opener, Elaine is right, and in some cases only ONE bigger cell is sufficient due to battery storage; however if the appliance is 20v AC, then an inverter is needed also. MOST of Elaine's answer is good, but a few corrections are needed: Plywood - use EXTERIOR grade only, and even then it can warp; chipboard or waferboard is preferable as it does NOT warp, BUT is not available most places in 3/8, /2 nominal, (5/32) is usually the thinnest available, and it is heavier than plywood. DO NOT use particle board. Superglue - NO, it dries too fast to be useful, in most cases. Wires - For a single cell OK, but for larger panels the best wire is tabbing wire, (which is flat,) which is available from all commercial solar cell dealers. Be very careful soldering this to the cells, as unless you buy the expensive flexible cells, they are easily damaged; I suggest also getting flux pens with liquid flux. Diode - Necessary, but needs to be large enough to handle voltage and current. Usually 25v and 5-30 amps,, one per panel. Plexiglas - OK, but NOT as long lasting as glass; best glass is the special solar glass which is designed to pass almost all of the proper light frequencies, but IS expensive, and usually needs to be specially ordered since most glass stores do not stock it. Double panes work well with the outer pane glass and the inner plexiglas, (to protect the cell if glass broken,) IF where might get damage, such as 'ground' mounting. AND Frame kits are available for larger panels, but IF you make your own, a good table router is a great advantage. Inverter - IF used for 20v AC appliances you MUST have an inverter capable of handling the load, and the best ones are modified sine, or true sine, wave types, and even the best are less than 50% efficient. Note that they will last longer if NOT used at more than 2/3 capacity.
Q:Why aren't electronics made with solar panels?
Solar panels could still be expensive, which would also raise the cost of the item.They also are made with chemicals that harm that enviroment(not too badly, but ya know..) You would also need to charge them, of course, in sunlight and most people enjoy the benefit being able to plug something in and still being able to use it. Not saying it's a bad idea, just the world we live in.
Q:Solar panels?
Yes there are lots available in many different types for instance take a look at www.okorder.com
Q:How many LED's can power a solar panel?
I okorder.com/
Q:Solar Panel System companies at the swapmeet?
Hard to say. Solar panels are becoming more common these days. May want to ask if the vendor is licensed and bonded contractor (if he's doing installation as well as panel sales). Find out the name of the equipment that this guy is selling (panels and other hardware) and do a search. For that matter, get the guys name and do a search on it to see he pops up elsewhere.
Q:SOLAR Panels?
I'm in the California Foothills and the island of Mindanao... I have both solar panels (electric and water heating) and a single wind-generator since 2000. We actually sell power to PGE in California and are self-sufficient in Mindanao. NOW, I'm confused with YOUR math... you say the Rep. suggests a monthly savings of $35 (25% of $40) which would be $420 / year. If materials / installation are $8,000 less $2000 tax-credit: it would take 35 years to pay off $6,000 at $420 / year. 980 Kwh/ mo is some pretty heavy usage... I'd suggest trying to reduce that. CFT's, lowering your AC setting, no lights if NOT in room, un-plugging stand-by appliances, and upgrading insulation. At our 2000 sq ft California RANCH we only burn 400 Kwh per month, and that includes an 800 sq ft barn (admittedly we heat with a wood-stove). We have 5, Sanyo 200 watt panels (3kw total) and generate an avg 900 kwh / month. SO, we're selling BACK almost 500 kwh mo. to the grid on the photo-cells alone. The kw wind generator averages another 20 kwh / month. I THINK the company YOU are working with is selling the EXCESS electrical-power back to the power-company behind your back !! GOOD LUCK
Q:Solar Panel System at Harbor Freight?
i wouldn't. - harbor freight isn't known for the best quality stuff. - 75 watts assumes roof mounting, at 90 degrees to the sun, on a bright day. you're going to get considerably less. and only when the sun is highest in the sky. maybe you should look at, your computer, for example. if you're using it for 4 hours, and it has a 500 watt power supply, and you add 200-500 watts for the monitor, and some for the printer, modem, etc, you'd use 5kw that day. your 75 watt panel, generating maybe 50 watts at most, for maybe 4 hours when the sun was highest, and shining directly on the panel, would generate 200 watt hours. it would take 25 days to generate the electricity you'd use in single day. in the winter, you'd be pretty much out of luck. there just isn't enough bright sun. clearly, it's up to you, but there's a harbor freight near me, and i'll not be rushing out to get such a system. further, most appliances are quite voltage sensitive. you really do need to have the voltage in the 0-20 range. too much out, either higher or lower, will shorten the life of appliances at best.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range