Solar Monocrystalline Series Panels Made in China

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 pallet
Supply Capability:
10000000 pallet/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Solar Monocrystalline Series Panels

Solar panel refers either to a photovoltaic (PV) module, a solar hot water panel, or to a set of solar photovoltaic modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions, and typically ranges from 100 to 320 watts. The efficiency of a module determines the area of a module given the same rated output – an 8% efficient 230 watt module will have twice the area of a 16% efficient 230 watt module. There are a few solar panels available that are exceeding 19% efficiency. A single solar module can produce only a limited amount of power; most installations contain multiple modules. A photovoltaic system typically includes a panel or an array of solar modules, an inverter, and sometimes a battery and/or solar tracker and interconnection wiring.

Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. Most solar modules are rigid, but semi-flexible ones are available, based on thin-film cells.

Solar Monocrystalline Series Panels Made in China

Introduction of Solar Monocrystalline Series Panels

CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.

 

Characteristics of Solar Monocrystalline Series Panels

I Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

IV AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.

V Junction box: Multi function junction box with water proof.

VI Long lifetime: ≥25 years; Less power decrease

VII Good performance of preventing from atrocious weather such as wind and hails.

VIII Resisting moisture and etching effectively, not effected by geology.

 

Standard Test Conditions of Solar Monocrystalline Series Panels

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

 

Advantages of Solar Monocrystalline Series Panels

• CNBM Solar performance guarantees for 25 years

• 12 years guarantee for workmanship

• Timeliness of delivery

CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel supplier in China, we strive to provide our customers with excellent service, superior products and unmatched value.

 

Characteristics of Solar Monocrystalline Series Panels

Max Power Voltage Vmp (V)

18.4V

17.6V

Max Power Current Imp (A)

6.52A

7.39A

Open Circuit Voltage Voc (V)

23.0V

22.2V

Short Circuit Current Isc   (A)

6.97A

7.90A

Max Power Pm (W)

120W

130W

Temperature Coefficient of Cells

NOCT

47±2

Temperature Coefficients of   Isc (%/)

0.064

Temperature Coefficients of   Voc (%/)

-0.33

Temperature Coefficients of   Pmp (%/)

-0.45

Mechanical Data Solar Monocrystalline Series

Power

120W/130W

Dimension

1190/1470×670×30mm

Weight

9.5kg/11.7kg

Tolerance

±3%

The dimension of the modules can be changed according to the demand of clients

Limits

Operating Temperature

–40 °C to +85°C

Storage Temperature

–40 °C to +85°C

Max System Voltage

700V

Guarantee Solar Monocrystalline Series Panels

Products Guarantee

10 yrs free from defects in   materials and workmanship

Performance Guarantee

No less than 90% within   10yrs and no less than 80% within 25yrs

Certificates

IEC, ISO, TUV, CE

 

 

FAQ

We have organized several common questions for our clientsmay help you sincerely

 

1Q:How long does the product can service?

A:It can serice above ten years.    

2.      Can you tell me the parameter of your solar panels?

We have different series of cells with different power output, both from c-si to a-si. Please take our specification sheet for your reference.

3.     How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:solar panel in a grid tied system?
Build okorder.com/
Q:Need help with Solar Panels (FAQ's and opinions)?
You need a plan as to what you are going to with 80 watts of power. 80w at the best, it will usually be less. One problem I have is the limited specs, you don't even know the voltage. And you get a Sharp Module but nothing else is mentioned about it. I wouldn't buy it unless you can get full specs on it and on the Sharp Module. With no specs, it's difficult to get a refund if it is defective. If you are going to store it and use it for an AC appliance, a small one, you will need: a charge controller (to control the charge into the battery) a lead acid battery (to store energy for when the sun is out) an inverter (to convert 2 volts DC into 20 VAC) and all of these cost. .
Q:How do you make a solar panel?
It's pretty basic, but I hope this helps!
Q:any one know about electricity solar panels?
The charger will accept whatever current is necessary from the solar panel up to 7A. It's not like the solar panel will force 2amps into the charger/battery -- the charger will control the current going to the battery. I question whether or not the 2V panel will actually charge the battery, though, because in order to charge a standard lead-acid 2V battery you need to have about 4.5 volts applied to the terminals. Perhaps the charger has a boost circuit -- I don't know without looking at it or knowing the brand/model number, etc. The timer must be 2VDC, but, if you only have a timer that is rated for 20VAC, you can buy a small inverter that will take 2V and supply the necessary 20VAC. An inverter rated for 20 to 50 Watts should be sufficient. These usually cost under US$25. .
Q:how long does it take for a solar panel to make one watt?
Build okorder.com/
Q:Amount of solar panels needed to run a/c and pool pump?
Solar panels are not going to be able to run a pool pump 24/7. They will only produce their rated electricity for 4 to 8 hours a day. For the balance you will need a grid connection or a battery backup. Running the AC would require different power levels depending upon humidity, outside temperature levels, solar gain for the house, and insulation levels. An underground house in Maine will be much easier to AC than a Glass house in Arizona. First find the power requirements. If you had the existing equipment they will have a label with the power requirements or the minimum breaker required if nothing else. For example the pool pump may require a 0 amp 240 breaker while the AC may require a 30 amp 240 breaker. That would be 2400 watts for the pump and (30 x 240) 7200 watts for the AC or a total of 9.6kW each hour of operation. (max) You will next need to find the rated capacity of the solar panels. If each panel were rated at 300 watts then you would need 32 panels for the daytime use and perhaps more to fill in a battery backup. All the numbers are very rough estimates.
Q:Whats the annual energy output of the average solar panel.?
The energy output is highly dependent on the location. For a specific area, you can look up the equivalent peak sun hours per day here: rredc.nrel.gov/solar/old_data/nsr... Let's say that it says the peak sun is 5 hours / day in your location. Then a typical 200-watt panel would have 5 x 200 = 000 wH = .0 kWh per day, or 365 kWh annually. The tables above already take into account average cloudy days, and seasons. A typical size installation would have perhaps 6 of these panels, but it could be less, or much more.
Q:Increasing Solar Panel Efficiency?
I am a senior in highschool and one of my classmates is basically a genius by all means that I can tell. He has already been accepted yo UNC Chapel Hill. His admissions statement was on exactly this subject. I proof read it for him. Anyways the basic problem with solar energy is that we can only harness about 20- 35 pecent of the energy and even less of that is converted into energy that can acutally be used. His argument is that if somehow we could harness chloraphyll which is the chemical which plants use to harness the suns energy and incorporate it somehow into our solar panels. We could harness up to 95% of the suns energy!!! Id deffinately look into this.
Q:How do Solar Panels work, and how it can generate electricity?
Solar okorder.com under products that are sorted by watts per area. Also go to wikipedia to get more detailed information on solar cells.
Q:Solar panels for security cameras?
Research using solar panels on stock tank water pumps. Same concept - you use a solar panel to power a remote something or other, only you would have to use a battery charged by day to run the camera at night. It does not look like you would need too powerful of a solar panel, the camera server says it needs less than 5w, no idea on the cameras, so check that out, but the whole system looks rather low power. You could easily get the necessary panels, maybe the battery too, for... I would say $200 (not in one package, you would have to get separate things). Connection of everything would be simple, no electrician needed (but keep that to yourself, depending upon state rules and regs).

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range