Solar Monocrystalline Panel Series (45W—50W)

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
30000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Description:

Solar Monocrystalline  Series (45W—50W) l : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

IV AI frame: Without screw, rner connection. 6 holes on the frame can be installed easily.

V Junction box: Multi function junction box with water proof.

VI Long lifetime: ≥25 years; Less power decrease.

VII Good performance of preventing from atrocious weather such as wind and hails.

VIII Resisting moisture and etching effectively, not effected by geology.

Standard Test Conditions of Solar Monocrystalline  Series :

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

Advantages of Monocrystalline Silicon Solar Panel

• CNBM Solar performance guarantees for 25 years

• 12 years guarantee for workmanship

• Timeliness of delivery

Specification of Solar Monocrystalline  Series

- Optimal permutation on solar cells to keep enough heat diffusion, decreases hot spot effect.
- High quality and anti-ageing EVA, weather resistance backside raw materials assure reliable solar panels.
- Passed 5400Pa mechanical loads testing by UL, can withstand bad and high mechanical load working environment.
- With good sealed performance, moisture resistant, aging resistance, high/low temperature resistant, the inner terminals of our junction box owns good electrical performance transmission. Bypass diodes used can avoide hot spot effect and damages to panels. Output cables and mating connectors are safe and reliable for installation application. Adopt weather resistance, sealed, good sticky silica gel when assembling.
- Strict quality inspection on each procedure and 100% electrical performance test to meet power requirements.
- 0~+3% power tolerance.
- classification for all the panels in order to improve the integral performance of system and solar panel life span.
- TUV、UL、MCS、CE、ROHS、Golden Sun certified
- Underwriting of 25years output power warranty by The People's Insurance Company of China.

 

Solar Monocrystalline Panel  Series (45W—50W)

Solar Monocrystalline Panel  Series (45W—50W)

Solar Monocrystalline Panel  Series (45W—50W)

 

FAQ

We have organized several common questions for our clientsmay help you sincerely

①What price for each watt?

It depends on the quantity, delivery date and payment terms,

②What is your size for each module? Can you tell me the Parameter of your module?

We have different series of panels in different output, both c-Si and a-Si. Please take the specification sheet for your reference.

③Can you provide the peripheral products of the solar panels, such as the battery, controller, and inverter? If so, can you tell me how do they match each other?

Yes, we can, we have two companies for solar region, one is CNBM International, the other is CNBM engineering Co.

We can provide you not only the solar module but also the off grid solar system, we can also provide you service with on grid plant.

④What is your warranty system?

 Our product  performance guarantees for 25 years

• 12 years guarantee for workmanship

• Timeliness of delivery

• Quality Products certified (TÜV, UL, CE, ISO)

⑤How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

⑥ Can you do OEM for us?

Yes, we can.

⑦How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:how many solar panels?
It depends on how many watts of electricity you wants..
Q:What solar panels are the most efficient?
There are a lot of solar panels available today's. The problem of the efficiency is the proccess of converting, these cells use the photons of the sun to react with the ( Si compound inside the cell) due to the little thing that cell's are only a fraction of these energy is converted, remember that solar cells are paper thin and the really problem of these cells are the voltage not the amps. A single 3x6 inches solar cells can produce 3.6 amps but only 0.5 volts.
Q:Need isntructions for solar panel diy?
But be aware that building your own panels will cost more than simply buying ready-made ones. This was not always true, but it is today. As you can see, this kind of information is widely available for free. Beware of scam sites that have a slick pitch making unrealistic promises, trying to sell you an e-book or video of the same stuff.
Q:Numbers behind Solar Panels?
For comparison, 36 of these make a normal 2V x 50W panel. Note they are not tabbed. This means you have to find a way to connect them yourself. The tabs are probably spot welded on by the suppliers. A supplier below has kits of these with tabs, as needed to connect them together. These are not suitable for grid connect, because the higher voltage needed makes do it yourself panels a dangerous and litigious thing to have on your roof. Maybe you could buy a smaller pack from the link below to compare tabbed and untabbed and work out what to do. Your power calculation is a bit incorrect because the sun is only present some of the time. The 36 cell module would produce 50W when square on to the full sun. The sun may be out for around 2h a day in some places and times of the year. However it is the equivalent of 5h full sun, because of the changing angle throughout the day. Look this up on the internet for your region. Temperate zones may be a lot less. One pack in your link is 36x3 = 08 cells. Thus 50W per pack x 5h a day gives 750Wh per day and 274KWh/y. In reality it will always be less because of regions, weather, clouds, dust, inefficiencies, aging of cells.
Q:How many solar panels do you need on your house to power your heater in winter?
I okorder.com/... To run your pump 24 hr you need 028 m^2 = 0.254 acres. In July the solar insolation is 5.92 kW-hr/day/m^2 and you need 0.042 acres to run the pump for 24 hours. Further south in the US, the numbers are more favorable.
Q:Can solar panels work in the shade?
YES. They work in direct proportion to the amount of light falling on the surface, regardless of the source of the light. In the shade simply means reflected light instead of direct sunlight, falls on the panel, with that much less output. The earth has an albedo of about 8, which meas about 8% of the light falling on the earth is reflected. The moon has an albedo of 2, which means 2% is reflected, which is why shadows on the moon are not jet black as you might expect in an airless place. The atmosphere of the earth is why shadows are lit as they are. The conspiracy theorists thought they had something to prove the moon landings were faked with the shadows not being black. They neglected to account for reflected light from surrounding sunlit objects scattering light the shadows.
Q:Benefits of Solar Panels?
There's a few different kinds of solar panels. Some of them are only for collecting heat, they're relatively inexpensive and not a bad deal, though installation can be expensive of course. The most sophisticated of these use some pretty high tech collectors to heat up an antifreeze solution that in turn is circulated through a reservoir (how water heater), to supply the house. Your electric producing solar panels are more expensive. You can go on OKorder and do a search on photovoltaic panels and get a pretty good idea real quick. The panels alone can run you 2 or 3 bucks a watt of output or more, and you may need 3 or 4 thousand watts of output to give you reasonable system for your house, depending on how much electricity you use. Then there's installation, for which you may need a professional electrician and so on. If you want a system incorporating deep cycle batteries then that's another expense, but you don't necessarily need those if you're not planning to take yourself completely off the grid. Not that the systems are really complicated. Some people wire panels together themselves from scrap cell components to save money. Of course you'd need to understand the basic wiring involved for that, and you'd almost certainly be required to retain an electrician to tie any system into the grid itself. Although there is such a thing as a plug in grid tie inverter. This is is a gadget that will take your DC solar panel output and feed it into the standard wiring of your house via an ordinary electrical outlet. You'd still need to understand enough to get the DC voltage right no doubt.
Q:What type of wires should i use for a solar panel?
Most epoxy is not very conductive. I would go with solder.
Q:Are DIY Solar panels legitimate for saving electricity?
I used this youtube video to help me build a 2 volt system. I used this video to build a magnet motor attached to a car alternator, I used an old Ford alternator because they are cheap, then put in the voltage reguialtor that I took out of the same car. I then hooked that up to 6 2 volt batteries in series, then I used 4 500 watt inverters, I got it going about 2 weeks ago, I am waiting to how efficient it will make everything, I also do not have my entire house on it. So far I have hooked up my fridge, deep freeze, 52 plasma tv, and washer. I have not hooked anything else into it yet. I have no idea if it has enough power to turn on full load, like I said I am still toying with it, but it seems to be doing fine.
Q:solar panel model HELP!!!!!!!?
There are different types of solar panels. Photovoltaic for electricity, and thermal for heating water, and passive for heating air. So it would help if you would say what type you are going to build. Theere are a lot of videos on you tube on how to make solar panels. use the link below.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range