Silica Thermal Insulation Nano silica Aerogel Blanket
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 10000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Description
Aerogel Insulation Felts
Using special nanotechnology, It combines a silica aerogel with reinforcing fibers to deliver very low thermal conductivity, low density and good flexibility in an environmentally safe product. It provides excellent properties of waterproof, sound absorption and shock absorption. It is an alternative to the common, environment unfriendly, inferior insulation products, such as PU, asbestos insulation felt, silicate fibers, etc.
2.Specifications
1.Superior Thermal Performance
2.Long service life
3.Environmentally Safe
4.Sound resistance
3. Advantages
(1).Superior Thermal Performance
The maximum use temperature is 1000℃,Its thermal conductivity is 1/3~1/5 of common insulators, helping reduce heat loss and optimizing space utility.
(2). Long service life
Unlike other traditional insulation materials, aerogel ’s three- dimensional, structure inhibits sintering warpage, and particles stack which may occur under hot temperature for long time. Therefore, aerogel insulation has long service life.
(3). Physically Robust:
It has flexibility and high tensile strength, resisting stretching and stress from linear contraction when temperature changes.
(4). Environmentally Safe:
Saving material and space; under the same conditions, this materials (thickness) can save more than 70%, greatly reducing transportation costs
Class A fire, non-combustible, non-toxic, fire safety
Overall hydrophobic, water-repellent rate of 99.8%, excellent moisture mildew
Flexible construction, easy cutting, convenient for different occasions
(5). Easy to Install
Extremely low density (200kg/m3) contributes to easy-to-cut and easy-to-install.
4. Technical Standard
Property | Unit | Techicial Standard | |
(refractoriness) | ---- | A Grade | |
(Density) | kg/m3 | <220< span=""> | |
(Lyophobic) | % | >99 | |
Thermal Conductivity | 25℃ | W/(m·K) | ≤0.023 |
70℃ | ≤0.029 | ||
200℃ | ≤0.036 | ||
300℃ | ≤0.045 | ||
400℃ | ≤0.056 |
5. Application
Oil pipe, steam pipe, refrigerator interlining, oil tank, central airconditioning pipe, chemical pipe with the requirement of fire resistance, vehicle thermal insulation, national defence, military industry, heat supply pipelines in city insulation, biological medicine pipes and equipment and so on.
- Q:what is the specification of glass wool sound-absorbing board?
- Mineral wool sound absorption board is mineral?wool?board, general specifications include 600*600,600*12000,300/400/500*1200-1800mm thickness is usually 14 to 22 mm. . But different production capacity depends on the specific manufacturer, the manufacturer without certain production capacity can't do the bar plate or reach the thickness. Here i recommend Meiluda mineral wool board, a factory with producing assembly line and ability. Cost performance was very good.
- Q:Can high-temperature glass wool be on fire?
- Glass wool will not catch fire because it beongs to Class A non-combustible products. It will carbonize but not burn if the fire is big and burning time is long.
- Q:If rock wool board and glass wool are used in enclosed stone curtain walls, which one is better?
- The meaning is actually same, but popularly it is called rock wool, while glass wool is adopted in actual use.
- Q:Does anyone clearly know about the construction technology of glass wool blanket, aluminum net and sound-absorbing wall?
- 1,4X20 wide aluminum mound layer, fixed with wood screws; 2, the layer of aluminum net; 3, fix the taut glass cloth on the surface of the keel; 4, stick 40 thick rock wool felt in the keel with construction adhesive ; 5 , 50X50X0.7 fix the light steel keel to the wall with expanded bolts, two-way medium range of 450-600; 6, polymer waterproof coating moisture barrier; 7, 8-10 thick 1: 0.5: 3 cement gypsum mortar layered leveling;
- Q:What does the thermal insulation test of glass rock wool include?
- Appearance, dimensional deviation(length, width, height), shot content, average diameter of fibers, flatness deviation, right-angle deviation, water absorption coefficient, hydrophobic rate, short-term water absorption, tensile strength perpendicular to the surface, compression strength, heat conductivity coefficient, dimensional stability, noise reduction coefficient, acidity coefficient, vapor diffusion resistance factor, long-term water absorption, combustion performance. These are testing programs of rock wool thermal insulation boards. The raw materials and performance of which are different from that of glass wool. In addition to the different areas, the required testing programs are different too. My answer is for reference only.
- Q:Is the glass wool poisonous,
- if the glass fiber deposition in the lungs, the human lungs will cause serious harm,
- Q:Which has better effect of sound absorption, glass wool or rock wool?
- I will choose glass wool as it is easy to install due to its low density.
- Q:Glass wool can be used at zero degrees
- Ultra-fine cotton resin products, -120 ~ 400 ℃
- Q:Who know the construction technology of glass wool?
- 1, The construction condition. 1.1, The substrate must be dry and be passed acceptance inspection. 1.2, The construction site should be granted with no more than five grade of wind force during construction. 1.3, Effective measures should be taken during construction in rainy days to prevent glass wool from being wetted by rainwater. 2, the main construction tools: wllpaper knife, electric screwdriver and fe, electric screwdriver and 2m guiding rule. 3, Construction process. 4. Construction points. 4.1, Construction preparation: 4.1.1, Material preparation: Prepare the detailed supply planned order of materials according to the drawings and projects condition. All materials approved into the site must be qualified products, complying with the relevant regulatory requirements nationally, industrially and locally. 4.1.2 Construction machinery: All machinery must be tested to ensure their good performance. 4.1.3, Personnel preparation: Technical personnel must be provided with technical training and technical disclosure. 4.1.4, Technical preparation: It needs to know well the drawings, prepare the relevant portfolios and quality acceptance criteria. 4.2 Installation of glass wool. 4.2.1 Select expansion insulation nails with corresponding length according to the thickness of glass wool, and make glass wool into sample plate based on the field condition before installing it. 4.2.3, Using insulation nails screw to pierce glass wool to install them into the wall according to the position of insulation nails on the facade of wall, which requires that glass wool should be assembled tightly and neatly without folds. 4.2.4, All seams should be cling to with each other with the gap of no more 3mm, and finally all seams should be sealed with adhesive tape.
- Q:Whether the rock wool is belong to the glass wool product or not.
- the manmade inorganic fiber is made by the high-speed centrifugation equipment. it molding is good. the different rock wool thermal insulation products has different requirements, and it can be made into different specification and the material of the cotton-shaped is the inorganic substance fiber with stable chemical performance. Glass wool is melten glass fibrosis, it is corrosion resistance, and man-made inorganic fiber, while adding a special binder and dust?laying?oil, low bulk density, good sound absorption, thermal insulation, low thermal conductivity. Glass wool belongs to a category in glass fiber, chemical composition belongs to glass, melting in high temperature! the specific defination is in the following rock wool is taken the natural basalt as the main raw material. the two names are different but the thermal insulating and refractory material performance is nearly the same.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Silica Thermal Insulation Nano silica Aerogel Blanket
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 10000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords