SHENDIAO CONSTRUCTION HOISTS SCD100/100

Ref Price:
Loading Port:
Dalian
Payment Terms:
TT OR LC
Min Order Qty:
1 set
Supply Capability:
10 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

The compact counter-jib has a reduced footprint, ballast supports and
stabilizer plates designed to be folded away for transport.
The nose and stabilizer plates can be simply unfolded which releases the guardrails.
Assembly of the jib on the ground
Operation of crane fleets can be optimized thanks to the possibility of exchanging certain components of the crane jib with other models from the same range

Counter-jib ballast blocks with inclined bases are used for simpler dismantling on the ground, since they can be laid down easily.
No locking mechanisms are necessary, and the counter-jib can be unfolded easily.

Pinning is quick and simple thanks to the centering pins of the splice.

 Variable frequency hoisting :
• permanent adaptation and optimizationof speed depending on the lifted load,
• very low slow speeds, smooth speed changes,
• high productivity.

 Variable frequency hoisting :
• permanent adaptation and optimizationof speed depending on the lifted load,
• very low slow speeds, smooth speed changes,
• high productivity.

Trolleying with variablefrequency, progressive speed by means of stepless control.

The masts adopt the standard bases from the MC range, allowing it to be adjusted to the desired height.
The adjustable bases are of the same type as those of the MC crane range, providing a choice of method of installation:
• on fixing angles,
• on cross-shaped base,
• on travelling gear,
• or as a climbing crane.
For easier management of your crane fleet, the standard elements taken from the MC range are assembled using pinned fish joints for ease and speed of connection.

MCT cranes are available with a wide range of optional features:
• Vision cab with or without air-conditioning
• Dialog VISU indicators
• Dialog Wind anemometer
• Top Tracing interference control and zone limitation system
• Remote control unit with indicator
• Automatic cartridge lubrication
• Auxiliary winch

• 5 models.
• Jib lengths from 40 m to 52 m.
• Maximum load from 2.5 to 5 tons.
• Maximum hoisting speeds from 2.8 to 82 m/min.

Fitted with jib lengths ranging from 55 to 65 m, the MDT Topless cranes boast hoisting capacities of 6 to 10 t.
Providing a suitable size for all your needs.
They allow complex multi-crane installations by considerablyreducing the height gaps and interference of cranes on work sites.

 

The assembly, erection, transport and even maintenance times are reduced, and as a result this helps to keep operating costs low.
Optimum productivity and greater safety make MDT Topless cranes the best alternative for all users or hirers.

Elegance and distinction
Their new shape is easy to distinguish from a distance.
The counter-jib projects a dynamic and refined design and the profiled jib, with a regular inclination, shows a fluid and
elegant line.

Minimized, compact and light package
Transport and erection
The shapes, dimensions and weights of the components were devised right from the design stage to scale-down the
package and save time. Only a single, small, mobile crane is required to hoist the packages and assemble them.

Assembly of the counter-jib on the ground

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to install the jack up tower crane 30How to install the jack up tower crane?
Looking for technical personnel to install, you fuck what heart?.
Q:What are the safety devices for the horizontal arm self lifting tower cranes?
(1) the lift height limit position limiter must be able to stop lifting motion immediately when the lifting device is raised to the 8OOmm at the lower end of the boom. For luffing cranes, lift the top of the hook to the lower end of the frame 500mm. The lifting movement must be stopped immediately. (2) lifting moment limiter and maximum weight limiter; when lifting torque reaches 90% of its rated value, the lifting torque limiter shall be able to issue an acoustic or red light to indicate the alarm. When the lifting torque exceeds its rated value and reaches 108% of the rated value, the lifting direction and outward direction shall be stopped. If the weight and amplitude indicator are set, the numerical value should be correct, clear and eye-catching. The digital error shall not exceed 5% of the indicated value. When the lifting weight exceeds the maximum weight, maximum lifting weight limiter should emit light or sound alarm, when the load exceeds the maximum weight of 6%, should stop to enhance the direction of movement, but to allow institutions towards the down direction.
Q:When the tower crane top height is more than meters
Three, lifting and installation, demolition works(1) lifting projects with unconventional lifting equipment and methods with single lifting weights of 100kN and above.
Q:What is the allowable range of vertical deviation for tower cranes?
The specified installation, construction, demolition of tower crane safety technical regulations in JGJ196--2010: the allowable deviation of verticality Tower: in the wind under no-load, the tower axis line should be less than 4 per thousand of the bearing surfaces of the lateral vertical deviation; after the attachment, the highest attachment point following the vertical deviation should be less than 2 per thousand. According to the installation state of tower crane, the deviation range of verticality is divided into 4/1000 or 2/1000. Tower crane maximum independent installation height (maximum installation height, does not need to be attached to the wall of the instructions specified in the free end) and height (the highest point of a tower crane attached to the wall above the height, body the following provisions in the specification of tower crane slewing) the vertical deviation range was 4/1000; tower crane attachment verticality deviation below the allowable range is 2/1000.
Q:Tower crane 5610 why is it called QTZ63?
Q is reusable, T is tower, Z is jack up, and combined is jack up tower crane. (this is the earliest known China, now the various manufacturers have their own name, some close to the French take, such as F0/23B, the tower jib 50 meters, a maximum weight of 10 tons, 2.3 tons of weight lifting arm tip)80 is the moment, the unit is t * m, (should say is the force multiplied by distance, 800kn.m) for 5613 cranes, the maximum lifting capacity of 8 tons, the boom length is 56 meters, arm tip lifting weight 1.3 tons, maximum weight in the range of 2.5 meters ---13 meters, calculation of 8 * 13=104, so the name is QTZ104, now the provisions should be a QTZ104, but before, people think is 8 tons of weight, so called QTZ80, is now available.
Q:How many meters of cranes should be in accordance with the anemometer?
The state specifies the installation of wind speed meters for outdoor cranes!AskMore than how many meters need to be installed, or as long as it's outdoor, it needs installationChasing the answerThe provisions of the People's Republic of China national standard GB 6067.1--2010:9.6.1.1 high speed cranes for outdoor work shall be equipped with an anemometer. The anemometer shall be installed on the windward side of the crane.9.6.1.2 high speed cranes for outdoor work should be equipped with an air speed alarm that displays instantaneous wind speed, and when the wind speed is greater than the working wind speed setting value, the alarm signal should be sent out.
Q:What kind of bodies are tower cranes made of?
Tower crane is composed of three parts: working mechanism, metal structure and power unit, and control system. The composition and function of the three parts are outlined below.
Q:There is no CAD map attached to embedded parts of tower crane?
4810 as long as 16. The middle spacing is different. It's almost impossible to install
Q:What are the "2 magnification" and "4 magnification" mentioned in the lifting characteristics table of tower cranes?
Popular saying: "car to hook this section of vertical distance, you see 4 wire rope is 4 magnification, you see 2 wire rope is 2 magnification.".
Q:How much is a team of 40 tower crane
Tower crane rental generally do not rent pricing, can not count number, not today is installed, removed tomorrow!Usually on a monthly basis, with or without use!

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range