Q:The characteristics of hydraulic platform

Hydraulic lifts and elevators are both elevations, but the biggest difference is the journey. The advantage of hydraulic lift is smooth, especially in the initial end of the lifting, but again good hydraulic elevator also amounted to less than 10 m or a few meters, and the elevator is similar to hoist, well make up for the disadvantages.

Q:Who knows the price of a sloping platform?

The platform is lowest, highest, high, and how long it takes to rise. I have a few friends who do this, I can help if I need to

Q:How does a button in the PLC control the elevating platform

Click on the rise to the top, and then the bottom? This can be used to refer to a button that controls an electric motor The elevating platform must have the upper and lower limit, and can not stop in the middle. Not safe.

Q:Where do the elevator motors go?

Abstract: the shear fork type electric elevator is a special equipment for high altitude operation. The it scissor mechanical structure, make the lifting platform lifting Has high stability, wide operating platform and high bearing capacity, make the work high above the range is bigger, and is suitable for many people work at the same time. It makes high-altitude work more efficient and safer. It is a special equipment for high-altitude operation. Characteristics: the lifting mechanism adopts high strength manganese steel. There is a safety protection device that prevents the elevator from overloading. Safety valve shall be set up to prevent rupture of hydraulic pipe. An emergency reduction device with a power failure. The product is suitable for high-altitude equipment installation, maintenance, etc. According to different requirements can choose different dynamic form (such as: three-phase ac power supply, single-phase ac power supply, dc power and diesel power, etc.), and with manual hydraulic equipment, can be in a power outage or lifting work as usual, no power supply and can add adjustable platform, can extend to the desired location on the length of the platform, so as to improve the work efficiency. It is the ideal of modern high building and equipment, which is necessary for the production of high-altitude safe civilization.

Q:There are different kinds of milling machine and vertical lifting machine milling machine

Vertical nc milling machine is the most widely used in nc milling machine. The bench mill expands the use range and is generally more accurate than vertical. The processing technique is for the workpiece, the process of the same workpiece is the same. Welcome to adopt

Q:How is the lifting handle of the universal knee-milling machine very tight

There are a lot of problems with that. It depends on the circumstances. If it's an old machine, it won't be easy to judge. New machine tools are different,

Q:Description of fixed hydraulic elevator

Fixed hydraulic elevator products can be divided into cut and fork, double shear, guide rail, cylinder type and wall hanging type etc. Design is novel, dual ladder anti-rotating structure, double speed drop system, the largest rise in 35 meters, stable and reliable, beautiful, simple operation is the biggest characteristic of fixed hydraulic lift cylinder type. Double ladder anti-revolution structure ensures the safety and stability of the work. Also, considering the actual environment of the scene, the oil cylinder can be dumped and handled to ensure the maximum scope of the machine operation.

Q:How does hydraulic platform change sealing ring, how to operate

Flange join type, should remove flange join screw first, use the screw to remove the end of the cover, can not lever or hammer, lest damage; Inside the card key type connection, should use a special tool, the guide sleeve toward the push, reveal the card key and hydraulic plunger pump used to () after remove the card key items with nylon or rubber texture the card key fill out again after its; Thread connection type oil cylinder, should screw the screw down first; In the demolition of the piston rod and the piston, not hard to pull out of the cylinder, piston rod components should try to keep the components of the piston rod and cylinder axis slowly pulled in a line.

Q:How does the platform maintain

Inspect hydraulic oil and oil level. The hydraulic oil should be 40 to 50 mm above the tank when the platform rises to the highest. When the oil is dark, the oil is sticky, or the oil has grit and other foreign things, the hydraulic oil should be replaced in time. The hydraulic system of lift platform applies 32 # hydraulic oil. A. check the hydraulic and pipe joints. The pipe is damaged and should be replaced immediately. Tighten the joint when the connection is loose.

Q:Does the shear fork lift stand belong to special equipment?

It belongs to special equipment, the manufacturer must have special equipment production qualification "special equipment manufacturing license" to be able to produce the sale shear fork lift machine. The products of the manufacturer without relevant documents are not eligible.