Semi-electric Aerial Reclaimer--DYT2-2.7
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Model | DYT2-2.7 | DYT2-3.3 | |
Rated capacity | kg | 200 | |
Max working height | mm | 4700 | 5300 |
Max platform height | mm | 2700 | 3300 |
Overall length | mm | 1300 | |
Overall width | mm | 760 | 840 |
Overall height | mm | 1700 | 1990 |
Platform size | mm | 900X600 | |
Ground clearance | mm | 30 | |
Wheelbase | mm | 770 | |
Lift motor | 12VDC/1.5kw | ||
Raising/Falling speed | sec | 19/17 | 22/25 |
Battery | 12V/120Ah | ||
Charger | 12A/15A | ||
Rear wheel | mm | Ф150×40 | |
Front wheel | in | 5 | |
Overall weight | kg | 268 | 313 |
-Emergency stop button
-Charge lamp
-Double brakers
-Voltage display
-Strut bar for safe overhaul
-Emergency descending button
-Overload limit
- Q:The hydraulic platform can't rise. Why?
- The hydraulic platform and the control line are relatively simple, the hydraulic pump running at the point of rise will drive the oil hydraulic drive plunger up. Turn on the solenoid valve when the point is lowered. Be described in the hydraulic pump caused by dirt Chen Ji which reduces the pump fluid efficiency, hydraulic pump will be removed to clean the pump tablet, does not rule out the filtrate may be network jam.
- Q:How do I design this hydraulic lift?
- We recommend jinan tianfeng hydraulic efficiency, professional production of hydraulic lift and lift platform, which can be custom-designed according to customers' needs. The product is of good quality and reasonable price. Good after-sales service is guaranteed!
- Q:What should the chain's main elevator be aware of when installing the chain
- The rail link elevator usually requires a design pit. For equipment and the ground level factors, design should be carried out in accordance with the actual demand design pit size, at the same time when the production equipment shall be carried out in strict accordance with the size of the pit production.
- Q:Tomb raider 9 research base elevator to go to go to go to go to the order to pry the gear not to go down to go down to go down the card 3 to break up
- When I play this card for a long time, also I am getting rid of the four is only the past, the front three gear easy to find, the fourth in 3, 4 layer between the right of the lift, there is a hole, was blocked by a few boards, you can go out from there the fourth also make it
- Q:What is the main shaft of the horizontal milling machine
- CNC horizontal knee-type milling machine is rigid and can withstand heavy load cutting. The CNC horizontal knee-type milling machine has sufficient power and wide spindle speed range. Can use carbide tool for high-speed cutting and make full use of tool efficiency.
- Q:The automatic mahjong machine has a lift station always one. What is the other three normal
- The synchronous motor is out of control, or the motor is broken by a series of windings
- Q:Simple manual lifting mechanism, a nut a bolt can
- Handle is fixed below the floor below need not fixed, it is not fixed under the base plate is fixed, the floor below the retaining common shim fix the quotas for marketing or for cap.
- Q:Does the shear fork lift stand belong to special equipment?
- In the light of the special equipment safety supervision regulations, hoisting machinery definition: refers to used for vertical lifting or vertical and horizontal moving heavy mechanical and electrical equipment, its range is rated lifting weight greater than or equal to 0.5 t lift.
- Q:What happened to the rise and fall
- The motor is missing (the motor is not moving, and there is a buzzing sound) to check the circuit breaker and the electrical wiring. The drop valve is open when the drop button is released, and the voltage meter is used to check if the valve has electricity. If there is no electricity, check the line and troubleshoot it. If there is electricity, the valve itself is out of fault. The slide valve must be clean and flexible. The overflow valve is adjusted to the relief valve. Under 100% rated load to adjust the oil level is too low, the oil pump hydraulic oil filled up at a empty absorption, oil absorption filter clogging, clean filter, oil leakage, check the suction tubing and connectors; Tighten the joint.
- Q:How to automatically lift up and lift
- The motor is controlled by a time relay, the motor is driven by a change of speed, and when it falls in place, it meets the power failure of the limit motor
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Semi-electric Aerial Reclaimer--DYT2-2.7
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products