Semi-conductive Water Blocking Tape

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
-
Supply Capability:
10000m2 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Product Description:

Water blocking is a commonly used water blocking material. Water blocking is common with adhesive tape material absorbent resin adhesion in two layers of polyester fiber non-woven fabric in the form. When the cable is damaged, contact with moisture absorbent resin after infiltration and water blocking in. Water absorbent resin can absorb moisture, and rapid expansion

 

2. Product Characteristic:

Thin thickness, high water absorbency, when encountering water rapid expansion, clearance of the cable core, vertical water blocking effect filled and has good tensile strength and thermal stability, and is not influenced by high temperature environment, the high rate water absorption material and the substrate evenly and firmly combined and in use no off powder, not sticking together, simple production process, technical performance and stability, practical strong.

 

3.Specification

Property

Unit

Specification

Thickness

mm

0.30±0.03

0.40±0.03

0.50±0.03

0.60±0.03

Unit Weight

g/m2

120±10

140±10

170±15

190±20

Tensile Strength

N/cm

≥30

≥40

≥50

≥60

Elongation

%

≥12

≥12

≥12

≥12

Swelling Speed

mm/1st min

≥8

≥10

≥12

≥14

Swelling Height

mm/3min

≥12

≥14

≥16

≥18

Surface Resistance

Ω

<1500

<1500

<1500

<1500

Volume Resistance

Ω·cm

<1×106

<1×106

<1×106

<1×106

Short Term Stability

230

230

230

230

Long Term Stability

90

90

90

90

Moisture Content

%

≤9

≤9

≤9

≤9

Values shown are for references only. For more  accurate figures, please ask for
 technical data sheets

 

4. Reference Picture:

Semi-conductive Water Blocking Tape

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Why this cable has not yet been certified
Electromechanical products are usually used to be assembled into parts, multiple parts and then assembled into a single product, the number of products or the number of pieces measured
Q:A five-hole dual-socket how to connect the wiring, the electrician line to go three lines, the switch can use a single socket did not take their own hands
Bookstore tool book should have "communication project budget", I do is what you say, the budget is divided into estimates and budget, is two steps. So that is not very clear. But what is needed is the preliminary design of the project. The budget is needed for design and drawings. Internal management of this piece, the main thing is that you need to do what the project department, and are generally very complicated
Q:What is the difference between "wire" and "cable"?
Inkjet printer is not printed, pictorial machine high definition, generally used in the advertising industry, for large outdoor advertising, the nozzle can choose not necessarily the number of installed, the more spray, spray the faster, a nozzle of the general life 1 year.
Q:Wire and cable CCC product consistency is what
What brand of wire pipe PVC pipe used? Is not in the financial or plastic surgery better ah? Guiqiu we recommend, thank you! What brand of network cable used a good, need double shielded cable, thank you
Q:Fiber optic cable split box, integrated wiring box, cable terminal box, cable transfer box difference
A lot of ways ah! You look at the back of the set-top box, a total of three kinds of interfaces, namely, HDMI digital signal (while transmitting audio and video signals), red and yellow and yellow chicken complex habit of glycosylation moxibustion slim faint handle (red is the right channel, white Is the left channel, the yellow is the video), the color difference signal (red, green and blue, only transmission video), S terminal (single hole four pin, only transmission video). You just put the video to the TV, the audio to the amplifier on the line. . if your amplifier does not have HDMI interface, then put the set-top box HDMI connected to the TV, the set-top box red and white two terminals, connected to the amplifier red and white input terminal, and adjust the amplifier to the appropriate channel The . if your amplifier has HDMI interface, then through the HDMI series on the line, the first amplifier or the first TV will do. . TV set after a lot of them, there is a group of AVOUT output interface, this group of red and white terminals connected to the power amplifier is also OK.
Q:Home wiring is a good line or a good line? Talk about the difference
This approach is a lot of the general is to extend the city line, that is, line 220V AC line lengthened, some in Taobao. 2. to extend the low-voltage line, engage in a power plug on the plug, the same set of seats, you can easily do an extension line, when you want to use, docking about it, when you can not close up. This is also on Taobao, when to buy, pay attention to the socket, plug the model to the on.
Q:Now the market professional installation monitoring the construction team how much money a point? , As well as cable patch panels and telephone patch panels how much money a point? Is it distance?
I think it is possible, because in our (old) substation, the cable trench is the drain, the cable erected in the cable bracket.
Q:How to distinguish between power cables and electrical wiring on drawings
Can not be removed, and so on after the first line of fluoride, and then demolition of air conditioning.
Q:Ipad charging display does not support this accessory
Ipad charge display does not support the general reasons for this and processing methods: . for non-original charger, it will often appear this situation, which is due to the charger does not meet the specifications caused by the replacement of a qualified charger can be. . if the original charger appears the above failure, please continue to look down. . please check whether the data line is normal. The appearance of the data lines seem normal, which may have been broken. Check the method is to borrow someone else's data line to see if it can charge. . shows the plug symbol is normal is full of display. If full or show the lack of electricity, indicating that the phone tail no problem. . again, check whether the original charger can work properly. You can connect the charger to other USB port to see if the phone is working properly. . if the above two check still can not charge, please try to insert the computer's USB port to see if the computer can identify the phone, to identify if it is to see if the charge, if not identified but not charged, it is estimated that the need for maintenance. If you can not identify can not charge, it is necessary to repair. If you can recognize and charge, replace the data cable and the charger (the original estimate is also damaged). . and then look at the voltage is not too low, not only to the maintenance station to repair, and pay attention to the iPad and iPhone do not mix the power adapter, the voltage is different.
Q:How are various wire and cable models named?
Cable type a lot, here to give an example: ZRC-YJV22-0.6 / 1KV3 * 25 +2 * 16 This model specification means: C-class flame retardant (ZRC) XLPE insulated (YJ) PVC jacket 22) steel tape armor (0.6 / 1KV) 0.6 / 1 kV (3 * 25) 3 25 square (+ 1 * 16) plus two 16 square copper conductor flame retardant copper core steel tape armored cross-linked poly Ethylene insulated PVC sheathed low voltage electric power.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range