• LNG engine saves energy by more than 30%.
• Green and environmental care, long engine overhaul interval.
• Specially designed LNG engine achieves perfect match with SEM drive train system, and it can compete with diesel engines in terms of overall response performance.
• Specially optimized cooling system for LNG engine.
• Fluid reservoir is enlarged by more than 10%, which prolongs the time of single work shift.
• Fluid reservoir vibration absorption device is optimized according to work conditions and it effectively ensures safety under tough work conditions and speed up travel process, and it also prolongs the service life of the fluid reservoir.
• Rear camera is mounted as standard configuration, thus there is no blind angle and it is more safe.
• Based on 650B, it can meet the requirements for heavy load work conditions.
• Closed loop control system of world-famous brand precisely controls the intake and combustion, which is more energy saving.
• Electric throttle features precise control and quick response.
• High performance PS bucket features high durability, larger penetration force and high efficiency.
|Bucket Capacity||2.7-4.5 m3|
|Rated Load Capacity||5000 kg|
|Operating Weight||16000 kg|
|Max. Drawbar Pull||160 kN|
|Max. Breakout Force||150 kN|
|Min. Turning Radius (Outside of Bucket)||7017 mm|
|Min. Turning Radius (Outer Tire)||6031 mm|
|Cycle Time (Bucket lifting, tipping and lowering)||10.8 s|
|Dump Height||3156 mm|
|Dump Reach||1222 mm|
|Standard Dimensions (L×W×H) (mm)||7960×3068×3380|
|Model||Sinotruck Steyr D10.21AT21National Stage II emission standards|
|Type||In-line, vertical, water cooling, 4-stroke|
|Rated Power||154 kW|
|Max. Torque||920 Nm|
|Type||Single stage, 3 elements, centripetal type|
|Transmission Type||Fixed axle, constant engaged power shift|
|Speed Gears||4 forward, 2 reverse gears|
|Max. Speed||42.2 km/hr|
|Front/Rear Drive Axle||4WD, fixed front axle, swing rear axle±11°)|
|Type.||Articulated frame, load sensing steering, steering priority|
|Steering Angle (left/right)||35°±1|
|Hydraulic System Pressure||17 MPa|
|Operation Mode||Mechanical control|
|Service Brake||Single circuit, air-over-oil 4-wheel caliper disc brake|
|Parking & Emergency Brake||Pneumatic internal expanding shoe brake|
|Fuel Tank||266 L|
|Hydraulic System||150 L|
|Weichai WDl0G210E22National Stage II emission standards|
|U-shaped coal bucket and long reach arm|
|Long reach arm|
|Quick coupler and tools|
- Q:How many kinds of documents are there in the loader?
- Now, the certificate issued by the safety supervision bureau is no longer useful! You need an operation card plus this QQ:2453105062?! They just sell it! Mine was bought there, too! You can get your certificate in a month! You can find it on the internet!
- Q:30 and 50 loaders, 8 hours a day, and their oil, earthwork, long-term work, long working hours in a car, about how much money, monthly
- 30 according to the workload of 8 hours a day, oil and drivers 1300 yuan, 50 yuan per day, 2000, long-term concessions, but not much.
- Q:50 how much oil does the loader consume per hour?
- 14.666667 liters of oil, usually 220 liters, can work for about 15 hours!! Calculated generally are big throttle, battlefield eating mixture!!
- Q:Why are loaders charging 24?
- Mainly depends on the power to start the motor, if the use of 12V power as the starting motor power, the current will be doubled, and related wires will be thicker and increase costs.
- Q:Solid tyres for loaders
- Shanghai Tire Co., Ltd. was founded in July 2006. Its capital involves solid tire, industrial tire production and sales, and is in the leading position among its peers.
- Q:What is a loader?
- Definition of loader:The loader is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, it is mainly used for shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc.. Different auxiliary working equipment can be changed, and the lifting, lifting and other materials such as wood handling can also be carried out. In the road, especially in the construction of high-grade highways, loaders are used for filling and excavating of subgrade engineering, aggregate and loading of asphalt mixture and cement concrete field. In addition, the soil can be pushed, flat ground and other mechanical traction operations. As the loader has the advantages of fast operation, high efficiency, good maneuverability and easy operation, it has become one of the main types of earthwork construction in the construction of the project.Two. Main components:Including engine, torque converter, transmission box, front and rear drive axle, referred to as four pieces;1. engines;2. there are three converter pump, the pump (supply lift bucket pressure oil) steering pump (variable speed pump oil supplies to pressure) also known as walking pump (supply torque converter, transmission pressure oil), some models of steering pump is also equipped with a pilot pump (supply control valve pilot pressure oil);3.. Working hydraulic circuit, hydraulic tank, working pump, multiway valve, lifting cylinder and tipping bucket cylinder;4., walking oil: transmission oil, sump oil, walking pump, one-way torque converter, all the way into gear valve, transmission clutch;5. drive: drive shaft, main differential, wheel side reducer;6. steering circuit: fuel tank, steering pump, steady flow valve (or priority valve), steering gear, steering cylinder;The 7. gearbox has one (planetary) and a split (fixed shaft) two.
- Q:Loader 12.16.18 numbers mean
- Refers to the rated load capacity of loaders, 1.2, 1.6, 1.8 tons
- Q:What are the reasons for the high water temperature of the loader?
- Two. Clean the brake discThe soil on the brake disc should be carefully washed. If it is too dirty, it will damage the piston dust ring for a long time, resulting in the corrosion of the piston, and finally cause the brake to bite. In particular, some stones should be cleaned in time so as not to scratch the brake disc. In the high-speed running highway should pay attention to use his nose to smell, if smell a burnt smell is immediately pull over and see whether the brake deceleration smoke, smoke phenomenon that the brake temperature is too high should stop to rest, avoid the brake failure caused by high temperature.Three, ventilation reduces engine temperatureIn summer, the temperature is too high will make the loader engine oil viscosity decrease in the work process, resulting in the loss of engine power to reduce the lubricating effect, in the hard work when the temperature is too high can open the side door ventilation hood to reduce the temperature of the engine.Four 、 fan drive beltCheck the fan drive belt, after long-term use, the belt will be tired, deformed and loose, change the belt, you should choose the correct type and length, properly adjust the belt tightness after installation.
- Q:How many cylinders does a general loader have?
- Some have an oil cylinder, a small arm, an oil cylinder.
- Q:Loader hydraulic oil always goes into the gearbox.
- Do not consider the problem of the hydraulic pump, check the hydraulic system pressure is not too high, because the system is the weakest part of the main burst pressure of hydraulic system is too high, to seal the hydraulic pump, O type ring pipe, weak link hose and the like.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range