• Engine conforms to National Stage II emission standards and torque converter is optimized, meanwhile it greatly improves traction force and reduces fuel consumption by 5%.
• With enlarged bucket, the productivity is improved by 12%.
• 18MPa hydraulic system pressure provides high efficiency and energy saving.
• Heavier counterweight provides larger load capacity.
• Rear-mounted fuel tank provides higher stability.
• Dump height is improved to 3.05m, which is the same as ZL50 loader.
• Brand new design of cooling system meets the requirements for -20℃ ~ +43℃ ambient conditions.
• Vibration absorption device is mounted with the engine, which further improves the seal performance and reduces vibration and noise.
• Working pump and SAE/DIN standard high pressure hoses are made at Caterpillar’s Wuxi plant, and the pipeline layout is optimized.
• Brand new electric system and circuit layout design and newly-added low pressure brake alarm improve the reliability and safety.
• The overall design meets the mandatory noise and safety standards in China.
|Bucket Capacity||1.5-2.5 m3|
|Rated Load Capacity||3000 kg|
|Operating Weight||9900 kg|
|Max. Drawbar Pull|| 98 kN|
|Max. Breakout Force||118 kN|
|Min. Turning Radius (Outside of Bucket)||5929 mm|
|Min. Turning Radius (Outer Tire)||5018 mm|
|Cycle Time (Bucket lifting, tipping and lowering)||9.3 s|
|Dump Height||3046 mm|
|Dump Reach||1063 mm|
|Standard Dimensions (L×W×H) (mm)||7120×2440×3137|
|Model||Deutz WP6G125E22 National Stage II emission standards|
|Type||In-line, vertical, water cooling, 4-stroke|
|Rated Power|| 92 kW|
|Max. Torque||520 Nm|
|Type||Single stage, 3 elements, centripetal type|
|Transmission Type||Fixed axle, constant engaged power shift|
|Speed Gears||4 forward, 2 reverse gears|
|Max. Speed||37.7 km/hr|
|Front/Rear Drive Axle||4WD, fixed front axle, swing rear axle(±12°)|
|Type||Articulated frame, full hydraulic steering|
|Steering Angle (left/right)||38°±1|
|Hydraulic System Pressure||18 MPa|
|Operation Mode||Mechanical control|
|Service Brake||Single circuit, air-over-oil 4-wheel caliper disc brake|
|Parking & Emergency Brake||Pneumatic internal expanding shoe brake|
|Fuel Tank||168 L|
|Hydraulic System|| 112 L|
|Xichai 6110 CA6DF1D National Stage II emission standards|
|Coal bucket and long reach arm|
|Quick coupler and tools|
- Q:Learn loader 20
- Ha ha loader is not good to learn ah ~ ~ I tell you the problem you don't learn to shovel shovel full, you must first master the dissatisfaction ~ ~ ~ ~ seat shovel also said you have to put the shovel flat Caixing ~ ~ loading easy entry must be placed flat to remember the shovel shovel.Remember to put the flat seat ~ ~ is also full of feelings ~ ~ your master is not to teach you ah, even this does not tell ~ what do not know how to ask me ~ ~ your master opened a few years?
- Q:Loader maintenanceThe ammeter in the loader is light, please ask the reason
- The main maintenance of the loader is still to beat the butter. If you live much, you'd better play it one day. Otherwise, if the length of time, each joint pins friction deformation, but also Zha pin, particularly troublesome. Followed by regular observation of oil, brake fluid, hydraulic oil and 8# hydraulic transmission oil, the shortage of OK.
- Q:Small game truck loader 4, fifth pass how to pass?
- The truck on the box marked with arrow fell explosive painting with lightning pattern on the plate will be broken up, small trucks can enter the bottom,
- Q:How are the responsibilities of loaders and automobiles divided into 20?
- Difficult to identify, the incident in what place, if the loader takes a road construction sign is not set and the pickup loader, much of the responsibility, the responsibility if is half and half in a square, or a negotiation process, each responsible for each other
- Q:Applicable range of small loaders
- Small loader is a very wide scope of application, basic can work with a shovel can be used as long as the appropriate venue
- Q:How long is the warranty on the loader?
- The loader's warranty and quality is now divided into brand shelf life is generally 1 years or 2000-2400 hours is the main engine crankshaft cylinder (some wearing parts such as oil seal, Paul 6 months)
- Q:What does loader model ZL60 represent?
- The Z: indicates that the loading L represents the wheel type, and the 60 indicates the capacity to load up to 6 tons.
- Q:Could you tell me the difference between scraper and loader?
- The difference between the scraper and the loader is as follows:The scraper belongs to an integral machine for removing soil and moving soil. Loaders are mainly used to shovel, install, unload, transport earth and stone a kind of bulk materials, rock or hard soil can also be slightly shovel operations.Two, different concepts.Scraper is one kind of trackless equipment in mine. It is widely used in mining and transportation of underground mine. Trackless mining equipment, with scraper and dump trucks as its core, has become the mainstream of mining technology at home and abroad.The loader is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, it is mainly used for shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc.. Different auxiliary working equipment can be changed, and the lifting, lifting and other materials such as wood handling can also be carried out. In the road, especially in the construction of high-grade highways, loaders are used for filling and excavating of subgrade engineering, aggregate and loading of asphalt mixture and cement concrete field. In addition, the soil can be pushed, flat ground and other mechanical traction operations. As the loader has the advantages of fast operation, high efficiency, good maneuverability and easy operation, it has become one of the main types of earthwork construction in the construction of the project.Three, the scope of application is different.Scraper main functions: excavation, soil handling, soil unloading, filling and leveling, suitable for repairing rivers and dams, and removing silt after flood.Loaders, commonly known as forklifts, the main role of loading and unloading, scope of application, construction works.
- Q:What material does the ZL-12 loader bucket use?
- 1., with plastic good, anti crack knot 506 and 507 electrodes replace the original used knot 426 and 427 electrode, welding tensile strength and yield strength close to the parent material;
- Q:The loader needs to place detailed details of the butter
- When buying a car to see the forklift maintenance manual in general is before and after the pin bucket and the working device is the big arm and small arm shaft has 6 rear axle two lever 2.5 hydraulic steering axis transfer machine has a middle arm has two cars and cars are not the same as his arms about more than 30
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range