|Safe working load||kg||230|
|Outdoor use||Wind speed 45km/h|
|Maximum working height||mm||16000|
|Maximum platform height||mm||14000|
|Turntable tail swing||mm||0|
|Vertical distance below thehorizontal extension level||mm||7670|
|Overall length (containertransportation)||mm||5150|
|Working platform size||mm||1830x760|
|Minimum ground clearance||mm||300|
|Minimum turning radius(inner wheel/ outer wheel)||mm||2220/5100|
|Turntable rotation angle||。||360|
|Platform swing angle||。||160|
|Fore arm amplitude angle||。||130（+70/-60)|
|Running speed (furlingstate)||km/h||6|
|Maximum gradeability 4x4||％||40|
|Maximum allowable angleduring working||。||5|
|Hydraulic oil tank||L||120|
|Tyre (solid tyre)||33x12-20|
The product is mainly applied in the building fields, bridge-constructing, shipping-made, airport, mine, port and dock, constructing of correspondence and electric power and fixing of outdoor-ads., , , Working range is extensive, it can be used in rugged terrain. CE certified.
1)Structure: telescopic boom ,continuous turntable can rotate 360 degree, good horizontal tractility.
2)Sole control system, the engine adopts Europe NO.3 standard emissions. CAN BUS control the operation.
4)The front bridge is using the design of swing bridge, the maximum speed is 6.5km/h.
5)Tilt protection and safety-interlock setting.
6)Using emergency hydraulic-pump devices to achieve emergency functional decline.
7)Drive mode : 4×4 and 4×2.
As a professional manufacturer of arm style aerial working platform in China,
we can provide our customers with self propelled straight arm aerial working platforms
and self propelled crank
arm aerial work platforms.
These boom lifts are designed with foam tires and the thick studs on the tires can
effectively prevent mud from sticking to tires.
Our arm style aerial working platform has passed CE test.
It is mainly used in bridge construction, ship building, airport maintenance,
the installation of outdoor
and the construction of communication equipment and power facilities, etc.
Besides, the boom lift can also be used in rugged topography.
-Can bus line intelligent controller
-Platform weighing limit function (EN280 standard)
-Turntable 360° continuous rotary
-Automatically adjustable platform
-Electric circuit fault code display
-Hydraulic swing platform
-Restart the engine protection
-Driving motor overtemperature protection
-Euro Ⅲ emission standard engine
-Hydraulic electric welding machine
-Hydraulic air compressor
-Hydraulic high pressure water pump
-AC power source connected to platform
-Platform working lamp
-Hydraulic oil radiator
-Floa, , ting bridge
- Q:The characteristics of hydraulic platform
- Hydraulic lifts and elevators are both elevations, but the biggest difference is the journey. The advantage of hydraulic lift is smooth, especially in the initial end of the lifting, but again good hydraulic elevator also amounted to less than 10 m or a few meters, and the elevator is similar to hoist, well make up for the disadvantages.
- Q:How to maintain the platform?
- The platform comes in many forms: a, hydraulic. B, mechanical, etc. Hydraulic platform maintenance essentials: 1, to minimize the use of the rustbelt for safety and safety. 2, the joints should be lubricated regularly and lubricate. Regularly check for corrosion or damage to the top of the high pressure tubing and tubing. 4, the limit switch is maintained in good condition, not water or moisture. Always check the oil pump pressure and the oil gauge line. 6, check regularly for oil spills. 7, daily clean maintenance work.
- Q:What kinds of tables are there? Which is better for the office?
- In the office, see if you're new or in the office. New outfit can consider electric elevator table, common card position can buy lift platform. It is recommended that they have a variety of elevating products, including elevating tables and elevating tables.
- Q:The characteristic of shear fork platform
- Shear fork lift platform is mainly used in the logistics industry, production lines, lifting, loading and unloading goods to floor between basement, can also be used to lift stage, lifting work station, etc. The product has a stable structure, low failure rate, reliable operation, safe and efficient and easy to maintain.
- Q:What about the heat treatment of the lifting platform?
- Heat treatment service condition and performance requirement of ball screw Screw transmission is the key to all kinds of machine tools, it is converting rotary motion to linear motion or linear motion into rotary motion transmission, positioning features. There are two main types of machine tools, such as trapezoidal screw and ball screw. The ball screw transmission efficiency is high, action quick, feed is steady, low speed crawl, positioning accuracy and repeat precision is high, long service life, widely used in nc machine tools and machining center.
- Q:How does the elevator repair
- All parts should be filled with lubricating oil to extend the life of the bearing. The oil and oil level of hydraulic oil. The platform rises all the way up, and in this position, the hydraulic pressure should be 40 to 50 mm above the bottom of the box. Hydraulic oil is a variation of dark, sticky or grit, such as a discovery should be replaced in time (32 # hydraulic oil) Annual maintenance A. check all the hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. C. the elevator hydraulic oil is put in the rejected, tighten the joint remove oil filter, after cleaning, use compressed air is clean, and then back into the tank, and the connecting line. (put on new oil and don't keep using the old oil. Otherwise, the moving parts in the system will accelerate the wear and tear.)
- Q:When the hydraulic platform drops, it feels very shaken and unbalanced. Please answer?
- When you're completely down you don't have any oil pressure 【 full fall and then can't operation, full blocked ah 】 after turn off the motor Oil pressure is lifting the audience chamber pressure in gravity Driving hang on Don't let the weight of it Electricity pen again under pressure relief valve core inferior vena no pressure The cylinder is not the same as the cylinder, but the circuit is directly in the gas path
- Q:How to improve the oil leakage line
- The line itself I think should be no problem, I don't know where your oil spill is. I think it's an interface leak, Or a hydraulic cylinder leak, And is your job stress reasonable? Is it too stressed?
- Q:The ball of the universal milling and lifting platform rolls off, how to install,
- Screw has a variety of forms, one of the most common is to use return and return two catheters, if not nut screw the screw will not drop the ball, if there is no turn the screw nut and fell out of the ball, that is to return or return pipe is broken, have to put on reload. Let me be specific. If there is no damage, then use the lithium base grease to keep the ball rolling in separate loops, and then turn the nut back in the way of the regular nut. The key is to start at the beginning, but once the ball comes out, it's going to come back again. Try it twice. (note the non-circular path (snails) don't let the ball drop!)
- Q:There is no easy way to push the goods when the platform is loaded.
- Yes ah, I know that you need Shanghai luo times Rio tinto, the original poster can combine their actual needs to understand, is upstairs said with race, on the platform with roller
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range