Self-propelled aerial working platform PSS230A
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | PSS400AX | |
Working height | m | 39.5 |
36.5 | ||
Platform height | m | 37.5 |
34.5 | ||
Platform capacity | kg | 400 |
Platform dimensions (L*W*H) | m | 1.5×0. 8×1.1 |
Working radius m | m | Working radius (capacity 200kg)16m |
Working radius (capacity 400kg)13m | ||
Cage rotation angle | ∑ | 180∑ |
Angle of rotation | ∑ | 450∑ |
Length | m | 8.2 |
Width | m | 1.58 |
Height | m | 1.98 |
NW | kg | 11700 |
Outrigger size | m | 5.01 |
Gradient ability | 30% | |
Working gradient | 30% | |
Pressure on earth(working) | Kn/m | 4 |
Pressure on earth(traveling) | Kn/m | 4.8 |
Max travel speed | Kn/m | 1.6 |
Range of wireless remote control | m | 100 |
Motor | Diesel 380V |
1.delicate shape, Rubber track has little pressure on earth, it can travel on any ground, eg.marble floor
2. The height and width of track is adjustable, it can travel on any unevenness road.(option)
3.pivot turn; big arm and forearm are retractable
4.hydraulic outrigger can control separately, self-level(option)
5.advanced alarm system protect machine work in the stable situation
6.avoid obstacle, work in the narrow place or gradient road
7.cage can tilt 180 degrees
8.Small when it retracts,nimble,the height of stowed situation is 1.98m
9.100M wireless remote control(option)
10.Cage can start or shut the machine
11.three types of working mode: self-propelled,truck-type and pull-type
12. emergency stop device and overloadd protection
13. state indication,alarm and limitation
14.walk,main arm lift, main arm stretch,rotating floor tilt;working arm lift has function of buffer delay, protecting against shock
15.Emengency operating system
16.advanced torque control
17.special type high strength material
18.The height and width of track is adjustable, it can travel on any unevenness road
19.double computer control,find mistake itself, LCD shows fault code(below 26m )
20.FUZZY control technology,precisely move(below 26m)
21.concentric stretch technology
22.Power hydraulic proportion control
23.All cylinders have hydraulic locks, safe even if the cylinder is broken
24.Emengency descending system
- Q:What kinds of tables are there? Which is better for the office?
- Hand. This is a waste of time and noise. 2: electric. Electric lift, mute. The downside is that you need to replace the whole table. 3: lifting platform. This is a table that is on the table, which is placed directly on the table and does not need to be installed.
- Q:Which mobile shear fork lift is better
- Mobile shear fork lift There are four major systems, The mechanical structure system,
- Q:What is the difference between elevator and elevator
- It's the same, but everyone's understanding is different.I hope my answer will help you.
- Q:What is the imported hydraulic platform car? Kneel and beg your help
- Their platform has a special mechanical structure that is widely used in high-altitude work, the shear fork structure, and the higher stability after lifting and lifting
- Q:Can the stepping motor drive the hydraulic platform?
- Why do you want to use a step motor? You can put a limit on the platform. If you step into the motor, you don't know if it's a linear relationship
- Q:How to maintain the platform?
- The platform comes in many forms: a, hydraulic. B, mechanical, etc. Hydraulic platform maintenance essentials: 1, to minimize the use of the rustbelt for safety and safety. 2, the joints should be lubricated regularly and lubricate. Regularly check for corrosion or damage to the top of the high pressure tubing and tubing. 4, the limit switch is maintained in good condition, not water or moisture. Always check the oil pump pressure and the oil gauge line. 6, check regularly for oil spills. 7, daily clean maintenance work.
- Q:How do you remove the horizontal universal elevator milling cutter
- When the milling cutter is removed from the vertical milling machine, the lever nut must be released and then the end of the rod is gently tapped. ; You should not release too much, as long as you have some loose space. When you release too much, the thread connecting the rod and the milling cutter is too short, and when you tap, you slip and even drop the knife.
- Q:How does the platform maintain
- Remove and disassemble the valve, and remove the valve core and remove it from the new installation. Put all the hydraulic oil in the tank into the tank, remove the oil absorbent filter, and put it back in the tank. The oil tank refilled with new oil.
- Q:Diablo ii flame volcanic mission will not be able to jump
- Go to the end of the board and move to the top of the board, then move to the opposite side of the position, shift the shift and then move the space.
- Q:How do you jump to the wall and jump to the wall?
- Hello, this is A question that I have also encountered, not by these three keys, but by right and A, and then by space. Hope to help you.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Self-propelled aerial working platform PSS230A
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords