Self-Adhesive Electrical Tape for Insulation with Different Color
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of KC71 Tape
• KC 71 is a self-amalgamating ethylene propylene rubber (EPR) tape used on solid dielectric cable for electrical insulation and jacketing in splices up to 69Kv and for building stress cones in terminations up to 35kV.
• The tape comes with a separator that is removed during the taping process.
• Its 0,76mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof.
• KC 71 is suitable for use with conductors rated at 90°C with an emergency overload rating of 130°C.
• The tape is also resistant to corrosion, chemicals and ultra violet light.
• KC 71 fully meets the Table 1 requirements for Type III tape in ASTM D 4388.
Dimensions of KC71 Tape
1” x .030” x 16.4'
25mm(width) x 0.76mm(Thickness) x 5m(length)
Consult us for other sizes
Specifications of KC71 Tape
Applications of KC71 Tape
• Electrical insulation and jacketing in splices of solid dielectric cable up to 69kV
• Building stress cones in terminations of solid dielectric cable up to 35kV
• Jacketing of indoor terminations
• Bus bar insulation and corrosion protection
• Jacket repair and restoration in all types of cable
• Moisture sealing applications
FAQ
Q1.Can we have the customized size tape?
A1:Consult us for other size
Q2:Is this Tape environmental-friendly?
A2:This tape is flame/arec resistance and environmental-friendly.
Q3:Can we have the sample/trail order to test quality?
A3:Surely we support the sample/trail order.
- Q:What's the raw tape?
- Adhesive tape, a kind of white opaque film PTFE product, is a kind of auxiliary material commonly used in plumbing and installing
- Q:Which is better for polyethylene foam film with low foaming interval?
- Bridging polyethylene foam low crosslinking (also known as chemical cross-linked polyethylene foam material) XPE, the product is made of low density polyethylene (LDPE) and ethylene vinyl acetate copolymer (EVA) as the main raw material, adding foaming agent AC and other chemical raw materials, mixing, processing, forming, and then after foaming and shaping, a series of postprocessing process produced a very fine,
- Q:How to improve the tensile strength of PTFE defatted raw meal
- At the same time, PTFE has the characteristics of high temperature resistance, its coefficient of friction is very low, so it can be used as lubrication, but also become an ideal coating to clean the inner layer of the water pipe.
- Q:What are the differences between PVC insulated tape and electrical tape?
- Electrical tape is called polyvinyl chloride electrical insulation adhesive tape, and some people call it electrical insulation tape or insulating tape.
- Q:I want to use the PVC electric tape to wind the broken wires. The copper wire is out. I want to wrap it with PVC electric tape. This is the kind of picture
- [PVC electric tape]PVC electrical tape is in soft polyvinyl chloride (PVC) film substrate, manufacture coated rubber pressure sensitive adhesive, has the characteristics of good insulation, flame resistance, voltage resistance, cold resistance, suitable for automotive wiring, wire winding, insulation protection etc.. Polyester electrical tape, also known as Myra tape, is made of polyester film and solvent based pressure-sensitive adhesive, tensile strength, high temperature resistance, used in the manufacture of various transformers.
- Q:What is a composite PE tape?
- Main technical specifications of adhesive tape1. Tensile strength >20MPa; patch >15MPa2, elongation at break is >200%, >300%3, peel strength >20N/cm; to coating primer steel plate >5~10N/cm; to back material >5~10N/cm4. Electrical strength >3MV/m5, water absorption rate <0. 03%Main technical specifications of primer1, table dry time 1~5min2, viscosity 10~15s
- Q:What material is the rubber tape used for insulation?
- . As a high performance polymer material, polyurethane insulation has become the fifth largest plastic after polyethylene, polyvinyl chloride, polypropylene and polystyrene.
- Q:Points above to get the glue paper tape on the door to deal with
- Most of the polymers used in the tape are epoxy. Polypropylene plastic
- Q:What's the meaning of blue tape in 6S management?
- 6S management marking tape is made of polyvinyl chloride (PVC) film as base material and made of rubber pressure-sensitive adhesive. There are black and yellow, red and white, green and white, pure yellow, pure red, pure green, green, black and other colors. Commonly used specifications: length 20M, width can be customized.
- Q:What is PVC double sided tape?
- [] double-sided tape is made of paper or cloth, plastic film substrate, then the elastomer pressure-sensitive adhesive or resin adhesive coating made in the substrate of the roll type adhesive tape is composed of base material, adhesive, release paper (film) or silicone oil paper is composed of three parts.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Self-Adhesive Electrical Tape for Insulation with Different Color
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
