Q:Why can the air conditioning connection be made of copper tube? How about rubber tube and aluminium pipe? Please heroes pointing for the dishes.

The pressure of the aluminum pipe is relatively small. "Again, when the aluminum pipe is too soft, it is easy to be flattened.".. Rubber tubes will decay if they are used! Withstand pressure is also high!

Q:What are the matters that should be paid attention to when installing rubber hose joint in water pump?

Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;

Q:How do you get the joint of the plastic pipe?

It adopts special glue adhesive and is suitable for PVC water supply pipeline.

Q:How far is the gas cooker from the gas riser in the kitchen?

The safety distance between stoves and gas pipelines is at least greater than 50 cm. This answer is the standard answer.

Q:Can the spring hose joint be connected to the tap?

Two treatment1 if Water Leakage can choose to replace the elbow elbow, the best selection of true Shide profiles or fittings2 if the ground is Water Leakage, nine in ten was a cause of the pipe in the ground before the hot melt glue of the elbow. Then have to ask the property or a professional plumber to weld.

Q:How to prevent leakage of rubber joint check valve?

As the valve body is particularly flexible, to ensure maximum resistance to back pressure at the same time to minimize water head, and some only one centimeter water head can be opened, so that the valve emissions and back resistance to achieve a perfect unity.

Q:How to remove hose odor?

When rubber is peculiar, it can be scrubbed by hydrogen peroxide. After drying, the odor will disappear. Or with waste tea sent to rubber products, tea has the role of adsorption odor.

Q:What's the difference between a silicone tube and a rubber tube?

1. Smell it with your nose. Silicone has no taste, rubber has taste.2, feel with your hands. Silicone generally better flexibility, rubber mechanical better.

Q:Latex tube, rubber tube, silicone tube, which three of the best tightness?

Ding Ji rubber: usually used as a silicone hose material used, in general, the sealing ability of silicone hose is better than the rubber hose. So, in life or in the industry need to seal the tube will take into account the silicone hose.

Q:What are the methods of sterilizing rubber hoses and Perspex?

Our laboratory rubber tube is directly into the steam sterilizer. After a few cracks, throw them away and use the new ones. Plexiglass products, we are placed on super clean bench, UV irradiation above 30min. Sometimes it takes time to wipe with 60% alcohol cotton ball.