S814C Road Roller Buy S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: S814C Road Roller
Parameter:
Model | Unit | S814C |
Operating weight | kg | 14000 |
Weight on front drum | kg | 7000 |
Static linear pressure | N/cm | 322 |
Speed range | km/h | |
Speed I | 2.7 | |
Speed II | 4.8 | |
Speed III | 10.5 | |
Theoretical gradeability | % | 30 |
Min. external turning radius | mm | 6800 |
Steering angle | ° | ±30 |
Oscillating angle | ° | ±11 |
Vibration frequency | Hz | 28 |
Nominal amplitude (high/low) | mm | 1.9/0.95 |
Excitation force (high/low amplitude) | kN | 274/137 |
Engine model | SC5D125G2B1 | |
Type | Water cooled, pressurized | Water cooled, pressurized |
Max. power | kW | 92@2200r/min |
Engine oil consumption | g/kW.h | 230 |
Hydraulic oil tank capacity | L | 170 |
Fuel tank capacity | L | 180 |
Advantages:
state-owned company
fortune 500 company
AAcustom
Why choose us?
1 sincre
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the equipment such as tower cranes, produced by CNBM are compliant with the national level quality.
2 professional
Our engineers will at your services 24hours to solve all your tower crane installation and other questions. Our goal is to provide the best professional services.
3 quality
CNBM International’s tower crane have strict quality control, only the best quality products can pass the test.
4speed
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
Inquies FAQ
My dearest friend, if you want to buy our tower cranes, please tell us the following parameters. And we will make the most suitable project for!
1. Building height or tower crane working height.
2. Max load capacity and tip load capacity.
3. Span or jib length
4. Other Special requirements
- Q:20T roller machine price
- I own a XCMG 202j 20T roller, 09 years to buy: usually 250 yuan per hour / month, monthly 16000 yuan
- Q:Roller cylinder is cylindrical, the width of the drum is 1.5 meters, the cross sectional diameter is 1.2 meters, if every minute to 10 laps, then 1 when the pressure of the road surface number of square meters?
- Solution: the bottom perimeter is 3.14 * 1.2=3.768 (meters)The lateral area of the cylinder is 3.768 * 1.5=5.652 (square meters)10 turns per minute, you can find one minute, the area of the road is 5.652 * 10=56.52 (square meters)1 hours =60 minutes56.52 x 60=3391.2 (square meter)Answer: 1 hours, 3391.2 square meters of road surface pressure
- Q:Classification of rollers
- The front wheel frame is hinged with the frame to reduce the unusual body sway of the road surface. The rear wheel and the frame are rigidly connected. Hydraulic control, hydraulic cylinder control steering. The front and rear grinding wheels are equipped with scraper to remove the adhesive on the roller. A sprinkler system is also provided for compacting the asphalt pavement by sprinkling the wheel to prevent adhesion of the asphalt mixture. To increase the force, but also in the grinding wheel with iron, sand, water and so on, increase the weight. The main technical parameters of steel wheeled roller are weight and line pressure. In 80s, all kinds of steel wheeled roller, machine weight range is about two wheeled roller 2~13 tons, three wheeled roller 1~15 tons, according to the requirements can be pressurized 1~3 tons, three axle roller press 13~14 tons, the pressure is 18~19 tons after weight. The roller is made of pneumatic tyres, usually with 3~5 front wheels and 4~6 rear wheels.
- Q:How often does the roller change the engine oil? Is there a master pointing at one or two?
- Your roller oil change cycle is usually 250 hours to replace!! The 250 hours here are a cumulative amount of work hours per day!! At the same time for changing the oil filter!!! If the environment is too bad (sand dust serious) can be replaced in advance. If you work less than 250 hours a year, suggest changing it once a year!! But it's a job of less than 250 hours a year, so I suggest you sell the roller!! Ha-ha!! I hope I can help you!!
- Q:Let me have some never played roller! 10 years 22 tons for 22W mountain people think? What are the disadvantages of this roller?
- Look, feel stingy, and fourteen tons of sixteen tons, and the machine is like 11 years, 10 years, and only 200 thousand, Xugong function higher than the rest of the domestic brands, all below one hundred and eighty thousand, the new 30 bit mountain, over three years, I sold one hundred and fifty thousand, I also consider quite a long time, and the truth,,
- Q:The dangers of young people turning on rollers
- Negatively speaking, lack of social experience is actually eat less, so you eat more slowly understand why the boss says that they make pressure on how how pressure, not with his nonsense, you say to him, he more angry, more than 10 hours a day and the boss asked people, a person carry not to live! I also drive the road ~ in the construction site must listen to.
- Q:How much is the compact roller?
- There are many styles and many models, so the prices are different. Usually within 3w. 1W above!
- Q:Will the Apocalypse Tank be pressurized back?
- and the apocalypse in the game setting is nuclear power driven, with nuclear reactors, has the world's most powerful armor attack with nuclear explosion effect...... roller? Go down as early as possible
- Q:Roller vibration pump solenoid valve is new. Point road no problem. Sometimes there is no vibration. Sometimes not stop, you can always, flameout, restart no longer. Is it the pump problem? Under the guidance of an old master
- The time has stopped, and there has been no vibration since it started
- Q:How many tons of pressure are there when they are opened?For example: take a site earthwork flat, 20 tons of press vibration can affect on soil 30cm within the excavation area of soil compaction?, not loose.
- In addition the roller roller and hydraulic machinery driving the same tonnage hydraulic roller die weight (can be simply understood as the effective work the weight of the steel wheel) greater. Effect of depth.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
S814C Road Roller Buy S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords