Q:Is the electric water heater well connected with the metal hose?

It's better to use a metal hose.Good resistance to high temperature.In addition, the metal hose is better tolerated.It is more durable and difficult to break than hose.

Q:High pressure hose crimping connector, pressed on what position can effectively prevent the head off?

If the withholding at the blasting, the main reason is the hose and the joint has not reached the best fit, in the areas of improvement should be mainly in joint selection and press on.

Q:What are the types of hose connectors?

In general, we'll sort it out first.It is divided into A/, B/, C/, D/, F/, G/, H/, K/A/ flat sealing type,Type B/ is a jacketed joint that matches the 24 degree C type,C/ points 24.60. and 74 degrees, and in turn with 24 degrees g, type and 74 degree g match,D/ is a spherical sealed typeF/ is a disc type jointG/ divided into 3 kinds, namely 24, 60, and 74 degrees, and the same degree of C matching seal,The H/ machined a sealing groove in the cone of 24 degrees g,K/ a quick change connector, it goes nuts, adopts the sealing method, the piston type to facilitate the replacement of Yucca Shaw, commonly used in coal mine which is commonly used to.

Q:Do you need a hose connection to connect the ventilation pipe to the exhaust fan? Under what circumstances? Under what circumstances?

Ventilation ducts and exhaust fans are for people or things, and the noise of vibration is unbearable for people or things.

Q:Will the outside of the brake hose of the car burst apart?

Now there is no leakage of brake oil, but also afraid of the oil leak in the running, after all, related to safety, I suggest not to save this money (brake hose is not expensive)

Q:What are the types of metal hose couplings?

DPJ external threaded end metal hose joint is an extension of JB/GQ 0552, /83, D95-5 metal joint;The metal joint is made of zinc alloy. The surface is zinc plated, frosted or chrome plated. The structure is close, without porosity and high strength. The metal hose is connected reliably and has beautiful appearance;The metal joint is an end connection and a linear connection for connecting the metal hose to the case;Suitable metal hose: JS, JSH, JSB, JSHG;It is recommended to use an inch metal hose joint or a metric thread metal joint;Can be customized a variety of non-standard metal hose joints, special metal joints.

Q:Why are the lengths of the household combustion equipment linked to the gas pipe hose no more than 2 meters?

According to the CJJ12 specification for installation and acceptance of domestic gas burning appliances specified in the 5.0.10, the length of the hose should not be less than 3m, because the hose and metal hose and rubber pipe and rubber tube difference, greater risk, need to be replaced regularly, the Gas Co to improve the safety factor, say no more than 2m, it is now more common.

Q:What's the difference between the rubber hose joint and the stainless steel hose joint?

1, high water use of this product, the pipeline must be fixed or fixed support bracket, otherwise the product should install anti pull off device. The force of fixed support or bracket must be greater than the axial force, or should install anti pull off device. And because the metal hose pressure resistance better, do not need to install.2, you can choose to use according to their working pressure: 0.25MPa, 0.6MPa, 1.0MPa pipe, 1.6MPa, 2.5MPa, 4.0MPa of the flexible rubber joint, high pressure pipeline equipment, we recommend that customers choose chungha brand stainless steel metal hose, according to the different use of the environment and the size, our biggest can withstand up to 300KG, customers can also ease of use.

Q:Is the rubber pipe joint installed in the middle of the pipe and pump for shock absorption?

A pump is a machine that transports liquids or pumps liquids. It will be the prime mover of the mechanical energy or other external energy transfer to the liquid, the liquid energy increase, mainly used to transport liquids including water, oil, alkali liquid, emulsion, suspension emulsion and liquid metal, but also transport liquid, gas mixtures and liquids containing suspended solids. Pump performance of technical parameters are flow, suction, lift, shaft power, water power, efficiency, etc.; according to the different principles of work can be divided into volume pumps, vane pumps and other types. Displacement pump is to use its studio volume changes to transfer energy; vane pump is to use the rotating blade and water interaction to transfer energy, there are centrifugal pumps, axial flow pumps and mixed flow pumps and other types.

Q:Does rubber hose drink from tap water? Is it poisonous?

.PVC is actually a vinyl polymerization substance, whose material is a non crystalline material. PVC materials often use stabilizers, lubricants, auxiliary processing agents, pigments, anti shock agents and other additives in practical use. Is not flammable, high strength, excellent resistance to climate variability and geometric stability. PVC has strong resistance to oxidizing agents, reducing agents and strong acids. However, it can be corroded by concentrated oxidizing acids such as concentrated sulfuric acid and concentrated nitric acid, and it is also not suitable for contact with aromatic hydrocarbons and chlorinated hydrocarbons. In addition, the terms person, vs, computer, abbreviated as PVC, and the PVC humanoid are often referred to as PVC.