RT-666 General Purpose RTV Silicone Sealant
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. One part, acetic silicone sealant, room temperature fast curing.
2. Excellent weatherproofing ability.
3. Good extensibility, excellent adhesive to most of construction material without a primer.
Where to use:
1. Joints adhesion of glass in decorative project.
2.Assembly of aluminum window and door glasses.
3.Joints adhesion and sealing among the glass, tiles, ceramics, aluminum, etc.
Instructions of use
1.Clean and dry the substrate' surface first of all.
2.Cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to full the joint.
Use limitations
RT666 silicone sealant should not be applied in the following conditions:
a. To structural installation.
b. To all places that bleed oils, plasticizers or solvents, and some uncured or sulfurized rubber.
c. To the unventilated space or the surface which can touch the food or water directly.
d. When the surface’s temperature is below 4 °C or above 40 °C
e. To materials contained copper or copper alloy, painted surface, which may cause paint cracking or paint stripping.
f. To the surfaces with lime powder, concrete or sand grain.
Please read company’s technical files before application. Compatibleness test and bonding test must be done for construction materials before application. Our only warranty is the price amount or the product replacement but without any joint and several liability.
Safety:
1.It will release volatile compounds before the silicone is cured or during the curing period.It will be harmful to healt if inhale high concentrations of volatile compounds in long time.So ,please pay attention to keep the air fresh on the work place.
2.It is not health if the uncured silicone touch the skin directly for long, if it enter in the eyes, rinse with plenty of water immediately, and then ask the doctor to check if necessary.
3.Cured silicone sealant will not release harmful things, and it would not be harmful to skin.
4.If swallow the silicone ,please ask for medical treatment immediately.
5.Do not let the children to touch the curing silicone, don't put the sealant at children's reach.
Storage period:
Keep dry and below 27 °C, storage period is 12 month since the date of production.
Standard:
A G 20HM GB/T14683-2003
Disclaimer:
Since we can't control the conditions and methods when using the products , these informations can't replace the customer's spot testing of safety and validity. The only warranty is only the price amount or the product replacement but any joint and several liability. Please make sure of th vaidity yourself.
No | Item | The standard | Test result | Test method | |
Test at 50±5% RH and temperature 23±2°C | |||||
1 | Appearance | Have no grain, no bubble, no skinning, no agglomerations | Pass the the standard |
| |
2 | Resistance to flow ,mm | Vertical | ≤3 | 0 | GB/T113477.6-2002 |
Level | No distortion | No distortion | |||
3 | Tack Free Time, h | ≤3 | 0.2 | GB/T113477.5-2002 | |
4 | Extrusion ability, ml/min | ≥80 | 715 |
| |
5 | Tensile modulus MPa | 23°C | >0.4 or >0.6 | 0.6 |
|
-20°C | 0.8 | ||||
6 | Hardness,(Shore A) |
| 20~40 | GB/T1531-1999 | |
7 | Tensile strength Mpa |
| ≥0.45 | GB/T113477.8-2002 | |
8 | Ultimate elongation % at break,% |
| ≥100 | GB/T113477.8-2002 | |
9 | Joint Movement |
| ±20% |
| |
10 | Definite Elongation | No break | No break |
| |
11 | Density, g/cm3 |
| 0.9375 |
| |
12 | Color |
| Clear |
| |
13 | Shelf Life |
| 12 months |
| |
The above mentioned chemical product has no poison,no pollution, and no cauterization. It is common chemical product. |
- Q:Common types of glue?
- Such sealants are based on oil, and commonly used oils are of various vegetable oils such as linseed oil, castor oil, and tung oil, as well as animal oils such as fish oil.
- Q:What is the difference between a sound sealant and a building sealant?
- Sound insulation sealant in the low temperature (-20 ℃) to high temperature (+ 130 ℃) to maintain good flexibility, long-term effective seal; can be directly used for glass, concrete, brick, metal, plastic, wood and other materials.
- Q:What is the use of glass glue and sealant? waterproof
- This thing depends on the individual. Glasses are materials that bond and seal various glasses with other substrates. Mainly divided into two categories: silicone rubber and polyurethane adhesive (PU). Silicone rubber sealant - that is, we usually say that the glass glue, and sub-acidic and neutral two (neutral plastic is divided into: stone sealant, anti-mildew sealant, fire sealant, pipe sealant,
- Q:What is the principle and amount of amine chloride used as a binder?
- Epoxy resin and polyurethane glue which one is better
- Q:What are the trends in the development of electronic adhesives and sealants?
- GIA announces a comprehensive report on the global market for adhesives and sealants. The report said that in 2017 the global adhesive market will reach 25.4 billion pounds, while the sealant market reached 6.35 billion US dollars.
- Q:Difference between Epoxy Adhesive and Silica Structural Sealant
- There is a difference, epoxy curing are generally hard, and silicone rubber is generally soft, the temperature side of the epoxy silicone is not good, but the strength can be said that epoxy is better than silicone rubber, need to use this Two kinds of glue can find me
- Q:Will the kind of adhesive soluble in water (preferably powder), melting temperature of about 800 degrees, was neutral or weak alkaline, thank you!
- Alginate is slightly soluble in water and insoluble in most organic solvents. It is dissolved in alkaline solution, so that the solution is viscous. Sodium alginate powder wet with water, the hydration of particles to make its surface with a sticky. The particles are then quickly bonded together to form clumps, and the agglomerates are slowly and completely hydrated and dissolved. Alginate is more difficult to dissolve in water if it contains other compounds that compete with alginate for hydration. Water in the sugar, starch or protein will reduce the rate of sodium alginate hydration, mixing time necessary to extend. A monovalent cation (such as NaCl) also has a similar effect at concentrations above 0.5%. Sodium alginate has a pH of about 7.2 in 1% distilled water.
- Q:Preparation of white latex formula and production process
- White latex is a water-soluble adhesive, is a vinyl acetate monomer in the initiator under the action of polymerization and made a thermoplastic adhesive. Usually add titanium dioxide (low-grade on the addition of calcium, talc, powder) .After the emulsion polymerization made of milky white thick liquid.
- Q:What are the types of glass adhesives? Is there any toxicity or contamination?
- Silicone glass glue from the product packaging can be divided into two categories: one-component and two-component. Single-component silicone rubber, the curing is by contacting the moisture in the air and produce physical properties of change; two-component refers to the silicone rubber into A, B two groups, any group can not be formed alone, But the two groups of mortar once mixed to produce curing. Commonly on the market is a one-component silicone glass gel.
- Q:How to control the concentration and the amount of alcohol
- Upstairs said anti. The use of the appropriate concentration of ethanol as a binder (in fact, can only be said to be wetting agent, because you do not add other adhesives), when the granulation of dry particles too much or too hard to consider increasing the ethanol concentration To reduce the concentration of water), if the particles are too soft or too little to reduce the ethanol concentration (equivalent to increase the concentration of water)
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
RT-666 General Purpose RTV Silicone Sealant
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords