RP,HP,UHP Carbon Graphite Electrode for EAF

Ref Price:
$8.90 / m.t.
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
1 m.t.
Supply Capability:
1000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Description: 

Graphite electrode is made from the domestic first petroleum coke and high  quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite      electrodes include regular power, high power, super high power, ultra high   power and square electrode. The range of diameters covers from 200mm to  700mm.  

Graphite Electrodes Features:

 

RP HP UHP Graphite Electrode 
1.Dia:40-600mm or1.6"-24"
 
2.Length:250-2400mm or10"-96"
 
3.Nipples:3TPI,4TPI
 
4.ISO9001:2008

 

Graphite Electrodes Application:

 

An increasing proportion of global steel is made using electric arc furnaces, and the electric arc furnace itself is getting more efficient and making more steel per tonne of electrode

 

Graphite Electrodes Specifications

1.Good electrical conductivity
2.High resistance to thermal shock
 
3.High mechanical strength

 

Technical data:

Synthetic Graphite Electrodes with 4 T.P.I. Nipples.


 

FAQs:

Q1  What’s the transport method?

A1  FCL delivery goods with wooden pallet; If LCL delivery, must with wooden case; Sometimes need open top, flat rack or bulk cargo.

Q2  What’s the required payment term?

A2  Generally 30% TT as the prepayment, 70% TT before delivery. If need, 100% Irrevocable Letter of Credit or negotiation.

Q3  Which country are our products exported to?

A3  Apart from entire Chinese market, the US, Russia, Japan, Korea, Australia and some Southeast Asian Nations.

 

 

 

 

 

Synthetic Graphite Electrodes with 4 T.P.I. Nipples.

Synthetic Graphite Electrodes with 4 T.P.I. Nipples.



 

 

 


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to solve the problem of graphite electrode being crushed during electrolysis
I can only use the experience of the past to tell you that if you want to save money easily, the time can be considered as the costA thick graphite stick; inexpensive
Q:How to improve the efficiency of graphite electrode milling, please tell me
When the tool is broken, it will not only stop the continuous processing of the steel, but also affect the quality of the product, which will lead to the scrap of the parts and the waste of the material. Considering the foreseeable future, the graphite electrode will occupy a high position, usually used equipment for processing graphite electrode the highest efficiency mold manufacturers will unremittingly, expand and between those determined to use the hard steel processing manufacturer competition gap. The foundation of micro cutting tools, in terms of graphite electrodes, is one of its most magical words: "high speed."". The spindle speed of the high speed machining center is up to 30000~60000r/min, and the feed speed can be increased to shorten the processing period and improve the quality of the surface and edge. The motor needed to drive this type of spindle is relatively small and light, which helps to reduce cutting power and reduce tool breakage. This is critical because many of the electrodes are complex, and their production involves small, easily broken micro tools (see Figure 1).
Q:How does graphite produce solar cells?
The team at the Massachusetts Institute of Technology has confirmed that electrodes based on graphene and ITO devices are comparable in efficiency. Although the power conversion efficiency of graphene is 4.2% lower than that of a general silicon cell, it will be competitive for special use in the future.
Q:What is the role of the Pt electrode? What is the difference between the graphite electrode and the graphite electrode?
This kind of stable material because of the chemical properties is stable, is often used as a counter electrode. The electrode is composed of circuit and the working electrode by current.Pt electrode, carbon electrode are inert electrode, relatively stable, can be used as the electrode.
Q:The reason why graphite is used as electrode
Graphite has good thermal stabilityThe softening point of copper in 1000 degrees, easily deformed by heat, the melting point of graphite is 3850 + 50 DEG C, the boiling point of 4250 DEG C, even after the ultra high temperature arc ignition, the weight loss is very small, the thermal expansion coefficient is small. The strength of graphite increases with the increase of temperature, and the strength of graphite is doubled at 2000 degrees centigrade. In comparison, the thermal expansion coefficient of graphite material is only 1/30 of copper material.
Q:How should carbon deposits be treated?
At certain temperature, can make alloy and carbon can react in the engine surface coated with a layer of graphene film, graphene nano particles can fill the pores, wear scratches, on the friction surface repair function.
Q:Do electroplating experiments, graphite as an electrode, graphite how to pre process to ensure that the coating will not fall, resulting in increased color of the solution
Both of these will be a little bit absorbed, when plating, the anode and anode inside the syrup will run on the negative pole,
Q:Graphite powder produced by graphite electrode and what we usually call graphite is a kind of thing?
In the electric arc furnace, the electric energy is released in the form of an arc, and the conductor is heated and melted. According to the quality index, the conductor can be divided into ordinary power, high power and ultra high power.
Q:Electrolytic salt water why use iron as a cathode, all with graphite can not?
Although iron and graphite can be used, it is better to use iron as the cathode: 1, because the cathode will be protected when it is electrolytic, that is to say, iron will be protected and will not lose electrons
Q:The graphite electrode made by the machining center adopts cooling method, which is water cooled, oil cooled and blow cold. Which is good?
Of course you do is oil cold if not toxic cooling but although graphite powder lubrication seems to have damage to the CNC, that someone with a water-cooled graphite again even with saponification liquid will rust and easy cleaning

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range