round copper mould tubes/copper mould tube
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 400 pc/month
- Option:
- Φ90~Φ1500
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Structure of Description
We are supplying High and Best Quality Copper Mould Tubes, which is the world's most Renowned and Reputed;
We supply Copper Moulds of Highest Quality, ensuring Maximum Life, excellent Heat Resistivity and smoothest Casting Operational efficiency.
CNBM, is the leading professional designer and manufacturer for copper mould tubes & plates as well as the complete sets of equipments & spare parts used for hundreds of domestic and abroad steel plants. The copper moulds supplied by CNBM adopt advanced European technology. Nowadays, CNBM is one of the largest copper moulds supplier and exporter with more than 30% market share in domestic market and 5% in the world market. We commit to supply products with world-class quality, competitive price, flexible payment terms, speedy delivery and excellent service, and we can also give technical guidance to help our customers to reduce the cost and increase the productivity. We have got high reputation from various customers all over the world.
2.Main Features
With Size range Φ90~Φ1200, Length 600-1100mm Radius R2500-R16000, Thickness 6-50mm
Steady and high quality,
Material Cu-DHP (SF-Cu DIN1787), CuAg0.1, Cu-Cr-Zr;Coating Cr, Ni-Co-Cr
We can design as per the customer’s specific requirements.
With lots of export expriences all around the world,
Fast shipment; 30-40days for production;
Packing : Strong, export worthy wooden cases.
3. Images
4.Specification
round
Size range Φ90~Φ1200
Length 600-1100mm
Radius R2500-R16000
Thickness 6-50mm
Internal geometries Par parallel, single tapered, double tapered, multi-tapered, parabolic tapered
Material Cu-DHP (SF-Cu DIN1787), CuAg0.1, Cu-Cr-Zr
Coating Cr, Ni-Co-Cr
* We can design as per the customer’s specific requirements.
- Q:New electrical wiring (in aluminum piping) on the wall passes very close to and crosses heating pipes that are copper. The copper pipes (from the boiler) give out a lot of heat, would that damage or in any way cause problems with the electrical wiring that is in electrical tubing?
- dont let the pipes touch or insulate heat pipe .
- Q:is it bad to smoke weed out of a copper pipe?
- If u bought it then no it was made to smoke out of but if home made i wouldnt just to be safe and weed isnt bad like pimp says but if u dont feel comfortable smoking out of it then make somethin like a steam roller out of a tp roll and foil, or use a can, apple or just make a pipe out of foil wont hit great but still works
- Q:In a novel of mine, my character is going to have a daughter and her name is going to be Copper, last name, Haverland. I was thinking about Ann or Alice for her middle name, but I'm not sure they're flowing all too well. Does anyone have suggestions?
- Copper Thalia Haverland Copper Hailey Haverland Copper Skyla Haverland
- Q:Is there a way to differentiate a pure Copper item from that of a Copper Alloy just by simple means? e.g. weight or density?as in don't need all those complex lab experiments and apparatus? thank you. =)
- If the amount of copper is high and the alloying elements are close to copper in density, the density of the alloy will not differ much from pure copper. Electrical resistance is one way of differentiating the pure copper from alloys. If the components are of the same shape and size, a simple multipmeter will do to differentiate the resistance.
- Q:I'm looking to have a Celtic, metal ponytail holder. I have my eyes set on this one:
- Copper needs to be in contact with your skin to be absorbed. Copper bracelets are a popular item. Don't worry about copper hair holders. They're harmless. You should be more worried about the EM field in your cellphone, pressed against your ear. Those can cause brain cancer.
- Q:Copper piping for plumbing. Are 1/2 dia pipes acceptable or should a plumber know to use 3/4in dia copper pipe?
- My house is very large with lots of plumbing. while the main feed in to the meter is 1, some 3/4 branches out but most of the entire home is 1/2 copper pipe. As long as everyone doesn't try to use the appliances, basins, toilets, and showers at one time, there is no problem. Not even 3/4 could handle significant load unless you have terrific water pressure, and the meter usually acts a bit as a reducer for that. All plumbers would know the correct uses of both 1/2 and 3/4 inch copper pipe. If you are having problems after work being done, there are always possibilities that there is blockage somewhere in the line, or somehow the 1/2 became kinked at some point, thus reducing the pressure and flow. I would not be afraid to use 1/2 in most of any new place. However, one should consider the newest, which is PEX. This is flexible, does not require soldered fittings and joints, but depends on internal fittings that look sort of like tapered brass joints. PEX is cheaper and easier to work with, bends as long as you have some space to do it with;if you don't the plumber places an L fitting and makes a true right angle with it. Some of the L's have shutoff valves. I recently saw a house that had a PEX panel in it. From there, you could shut off the water supply to any part of the house simply by turning the valve to closed. The panel looked like an electrical panel, only it had at least twelve PEX lines running out of it. PEX comes in lighter grade for lesser loads and heavier grades for larger loads. It looks like a hard shelled garden hose. Less than 1/2 the cost of copper piping and goes in faster. Requires a special drill type fitting to expand the ends so they will snug onto the fittings. Really neat stuff. Will withstand temps better than copper, too.
- Q:how to repair leak on air copper pipe picture attached?
- put a pc of rubber on it clamp it with a hose clamp
- Q:if copper sulphate will be used as a electrolyte and zinc and copper as electrodes....expalin the whole mechanism.......please......and tell me thet will zinc be at the higher potential or at the lower potential....i.e will zinc be negatively charged or positively charged and whyyy???
- this is the a voltaic cell, two dissimilar metals ( copper and zinc) are immersed in an electrolyte ( a dissolved sulfate). If the metals are connected by an external circuit, one metal is reduced (gains electrons) while the other metal is oxidized ( loses electrons). copper is reduced and zinc is oxidized. The difference in the oxidation potentials of the two metals provides the electric power of the cell. Zn/ZnSO4 // CuSO4/Cu 2e- + Cu2+ ------> Cu reduction reaction of Cu ions to form copper metal. The valence state of copper is reduced from 2+ to 0 Zn --------> Zn2+ + 2e- oxidation reaction of zinc metal to a zinc ion Standard Reduction Potentials: Cu2+/Cu Eo = +0.340 V Zn2+/Zn Eo = -0.76V Cu has the highest reduction potential In order for a battery to work dE > 0 dE= Er - Eo dE = ECu - EZn = 0.34V - (-0.76V) = 1.12V this is the EMF ( electromotive force) Thats the way the battery works... sorry for my english
- Q:I know the price of copper has spiked. Has any mining operations resumed in the Keewanaw penisula due to this price rise?
- with copper and other precious metals prices on the rise i expect to see many abandoned copper mines to be revived as long as prices stay where they are or higher. i believe the break even price of copper is 50 to 60 cents a pound.
- Q:They had problems with Ice build up on last apparatus. Would coating the inside of the apparatus with copper help since copper stores heat and melts through ice? They are even talking of using copper on the ice of Europa. If you place a penny on ice you can see if fall through. Just a thought. I figure kicking ideas around is a good thing because that is how problems are solved.
- If the copper starts out cold, it'll tend to stay cold -- for a while. For the ice bucket to work as desired, it should be cooled before the ice is added. If the copper starts out warm, it'll tend to stay warm -- for a while. Copper doesn't generate heat, it just stores it. It wouldn't take very long for warm copper lowered to the bottom of the gulf to cool to the same temp as its surroundings. Maybe copper would stay warm for a few minutes longer than some other metals but that would be the end of the affect.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
round copper mould tubes/copper mould tube
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 400 pc/month
- Option:
- Φ90~Φ1500
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
