Rotary Speed of Saw Wheel and Woodworking Band Machine
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Rotary Speed of Saw Wheel 680r/min Woodworking Machine Best quality Band Saw
Woodworking Band Saw Machine Effectively in Processing Wood
Main Structure Of The Machine:
This machine from the body, working platforms, the upper and lower saw wheel body, the upper and lower saw card device such as security cover and transmission parts.
Use of the machine:
This machine is mainly used for wood vertical saws, horizontal saw all kinds of Square-edged Timber and plates, also applies to non-metal-like plastic, nylon sawing.It is suitable for all kinds of wood processing plants, such as furniture factories, board box factory, wood thread factory, wood-mode manufacturing and construction technology, etc.
Main Specification And Technology Parameter:(Normal Type)
Model | MJ345/MJ346 | MJ316A/MJ316D | MJ318/MJ319 |
Saw wheel Dia. | 500mm/600mm | 610mm/620mm | 800mm/900mm |
Width of sawing woof | 450mm | 400mm/350mm | 350/400mm |
Height of sawing wood | 150mm | 300mm/350mm | 400/600mm |
Cutting speed of saw band | 20m/sec | 21.3m/sec 27m/sec | 30.14m/sec 34m/sec |
Rotary speed of saw wheel | 780r/min | 680r/min 830r/min | 720r/min |
Adjustable angle of worktable(LXW) | 0-45degree | ||
Max size of worktable( | 540X570mm | 780X700mm/840X750mm | 800X750mm/830X780mm |
Motor power/Voltage frequency | 2.2kw(3HP) / 380V 50Hz | 4kw/7.5kw(5.5/10HP) / 380V 50Hz | 11kw(15HP) / 380V 50Hz |
Weight of machine | 300kg/850kg | 850kg | 980kg/1100kg |
Overall dimensions | 860X700X1900mm | 1600X1200X2050mm | 1700X1350X2350mm/ 1750X1400X2750mm |
Main Specification And Technology Parameter:(With sliding table type)
Model | MJ316DT | MJ318T | MJ319T |
Size of sliding table(LXW) | 2800X377mm | 3200X367mm | 3200X367mm |
Saw wheel Dia. | 620mm | 800mm | 900mm |
Max processing length | 2600mm | 3000mm | 3000mm |
Width of sawing woof | 350mm | 400mm | 400mm |
Height of sawing wood | 350mm | 600mm | 600mm |
Cutting speed of saw band | 27m/sec | 34m/sec | 34m/sec |
Rotary speed of saw wheel | 830r/min | 720r/min | 720r/min |
Max size of fixed worktable | 830X350mm | 790X380mm | 790X380mm |
Motor power/Voltage frequency | 7.5kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz |
Weight of machine | 1150kg | 1300kg | 1400kg |
Overall dimensions | 2870X1850X2750mm | 2870X1850X2750mm | 2870X1850X2750mm |
Model: MJ345/MJ346 worktable may tilt 0-45 degree.
- Q:Integrated ceiling sealing edge role, not surrounded by edge can be?
- The edge sealing plays the role of beauty and fixing the buckle plate. It is best not to have much trouble.
- Q:PVC sealing strip extrusion black lines when what is the reason?
- That depends on the location of the black line:If the black line fixed appear continuously in the same place, it is often the mold or the extruder die dead, resulting in material in the long retention time and dead material after carbonization coke black from the same position with a continuous black line, produce.If it occurs at different times in different locations, it is more likely that the recipe system needs to be trimmedPVC is white powder amorphous structure, the degree of branching is small, the relative density of about 1.4, the glass transition temperature of 77~90 DEG, 170 DEG C to decompose, the stability of heat and light, at 100 DEG C or after long time exposure to sunlight, will decompose and produce hydrogen chloride, and further autocatalytic decomposition, causing discoloration also, the physical and mechanical properties decreased rapidly, in the practical application must be added in order to improve the stability of heat and light stabilizer of the.The molecular weight of PVC in industrial production in 50 thousand ~11 million range, with larger polydispersity of molecular weight increases with the decrease of the polymerization temperature; no fixed melting point, 80~85 C 130 C to begin to soften, the viscoelastic state, 160~180 C began to change into the viscous flow; have good mechanical properties, tensile the strength of about 60MPa, the impact strength of 5~10kJ/m2; have excellent dielectric properties.
- Q:How to seal the opening of the cabinet?
- Cabinet? If it is a circular hole can be used for special edge edge, if the square hole is required in the basis of edge banding on sealed glass glue.
- Q:Automatic semi-automatic woodworking machine edge sealing machine in general how much?
- Full automatic edge sealing machine, ranging from 50 thousand to more than ten thousand;Semi-automatic linear edge sealing machine, about 30 thousand more reliable. The end of the year when the general equipment offers more, can save a few thousand dollars.There are some more than 10000 semi-automatic edge sealing machine, the configuration is quite low, mainly some funds tight, mechanical requirements are not high customers will buy this type of equipment, as a transitionThere are also manual edge sealing devices that require only a few thousand
- Q:How should the reinforcing rib of the reinforcing bar of the cap be arranged?
- First, according to the specifications, as follows:Specification: 4.2.3.2 under column independent pile cap workingreinforcement should pass configuration. The rectangular reinforcement plate should be evenly arranged according to the direction of both sides. The diameter of the steel bar should not be 10 small, and the spacing should be 100 ~ 200mm. For the three pile caps, it should be evenly arranged according to the direction of the three plates, and the three steel bars intersected at the bottom shall be within the scope of the column section. ? ?Two, reference specification:Technical specification for building pile foundation and standard atlas of reinforced concrete circular pile caps.
- Q:How to install stainless steel edge banding?
- Usually stained with glass glue
- Q:I sell cabinets, and now the price of pressure is very serious, I would like to do their own cabinets, I would like to ask banding machine what kind of cheap and convenient?
- Edge banding machine from thousands of pieces to hundreds of thousands of different, do cabinets suggest that you buy a little better. Buy a sixty thousand or seventy thousand automatic, the most suitable!
- Q:Is there an environmentally friendly adhesive tape?
- Some Eagle (hot melt glue). Winter low temperature, as far as possible to choose a high temperature, so that. Small odor and volatile!
- Q:What is the cabinet edge?
- Is the cabinet door around four sides, mainly to see the door what material is the edge, general Aluminum Alloy is the most common, but this kind of easy sealing seam, long time will be difficult to take care of grease.Now here in Shanghai a little better cabinets, are sealing material and door panels are made of the same materials, such as paint door, the edge is together baking, so there is no gap, easy care, will not let the formaldehyde inside the cabinet door release.
- Q:I do Aluminum Alloy edge cabinets with more but do not know what a good play I've been playing rubber sealant but I found people playing is a kind of transparent glue and dry hard also do not know what is the glue please help thank you.There is aluminum alloy edge banding, how can you precisely cut 45 degrees angle, I cut all right, not very good mouth how to do, there are burrs on the incision?.
- The edge of modern furniture parts along the edge of a common processing method, the best use of manual edge special glue edge, does not recommend the use of adhesive, heat is easy to fall off. The aluminum alloy sealing edge on the cabinet door should choose environmental protection and healthy glue, for example, glue of German glue king. Ordinary glue contains a large amount of formaldehyde, used in furniture which has great harm to the body, while glue king is environmental protection glue, reaching the highest environmental testing standards.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Rotary Speed of Saw Wheel and Woodworking Band Machine
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
