RM80-1 Robin or Honda Gasoline Engine Rammer Hammer, Stamping Hammer
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 100 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Gasoline Rammer Hammer RM75 is widely used in road construction, pipeline construction, municipal engineering, bridge pier, courtyard, railbed, suburb and narrow field without electricity.
Gasoline Rammer Hammer RM75 is used to tamp various gravel and sand, and also can be used to tamp asphalt, concrete and clay. The tamping performance is especially good for tamping clayed soil.
Features and Benefits:
1. Rammer Hammer is with advanced design, stable performance, strong tamping force, easy operation, safe using, wide application and high efficiency.
2. Secondary Filtration System, which can purify the air over 99%of dust and prolong the engine life;
3. Dust off corrugated box, which made in Germany and its service time is over two years.
4. Crankcase, which is made of aluminum alloy.
5. Oil Pointer, which can avoid excessive fueling and is by one-time precison casting.
6. Gears, which is made of 20 Cr-Mn alloy steel, forged by nitriding, the internal organizational structure mostly optimized, high strength and wear resistant.
7. Ram Plate is made of wood in the middle and steel up and down side, which combo can reduce vibration effectively;
8. All the parts(Including Oil Tank, Gear Box, Bellows, Oil Pointer, Ram Plate) are exchangeable with Japan Mikasa's Tamper, we sell parts individually.
Product Specifications:
Model: RM80-1
Gasoline Engine: Robin EY20
Engine Power: 5HP
Leap height: 40-65mm
Impact Force: 10-13KN
Impact Frequency: 450-650 times/min
Plate Size: 30cm x 31cm
Weight: 80kg
Packing Size: 77cm x 57cm x 109cm
FAQ:
Q1: Does the Rammer Hammer use electricity or gasoline?
A1: The Rammer Hammer adopt World Famous Brand gasoline engine.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some Rammer Hammer according to customers request?
A4: Yes, we can produce Rammer Hammer according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5: OKorder and our manufacture both have overseas branches all-around of world, IF needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities & skilled personnel at site for training.
- Q:How much money for rammer one meter three-phase cable?
- According to the brand, the quality is different, there is a big difference in price! Had better go to local market to turn, 3*6+1 cable price from non-standard to national standard 10 yuan, -18 yuan one meter range, this kind of cable market is not pure national standard, can buy 3 main line, can achieve 5 square of good.
- Q:What should be noted in the operation ramming machine construction?
- (1) the tamping machine operation switch must use directional switch, prohibited the use of reverse switch, the inlet line should support ring; (2) handle must be provided with an insulating material; (3) each machine must be set two operators, one person tamper a random arrangement of cable (4); the operation of the tamping machine must wear rubber soled shoes, gloves, handling machine must pull off, (5) when stop must be pulled between power, to lock the switch box. Do a good job of moistureproof and waterproof of motor.
- Q:Vertical rammer leak repair how to fold
- 2, the joint is loose, the solution is to tighten the joint or joint replacement.
- Q:Classification of rammer
- The fire is rammed under the action of the explosive force of the combustible mixture, so it jumps off the ground from the top to the top, and then hits the ground and strikes the soil under the weight of itself. The hammer falls and the body moves forward step by step.Electric breaststroke rammingMade by the principle of rotating inertia force, it is composed of rammer, rammer, eccentric block, belt pulley and motor. The motor and the driving part are mounted on the skid seat, and the rear end of the rammer frame is hinged with the drive shaft, and the rammer can swing up and down the shaft under the eccentric force of the eccentric block.
- Q:The advantages and disadvantages of gasoline and electric rammer breaststroke tamping rammer
- Domestic gasoline flat rammer just so so, domestic gasoline shock ramming no one qualified!The only advantage of an electric RAM - cheap! Nothing else
- Q:Each layer requires ramming machine in the construction standard of soil thickness after compaction or virtual shop
- Each layer requires ramming machine in the construction standard of soil thickness is the virtual shop
- Q:Three-phase electric rammer or two-phase power
- But the three-phase motor's magnetic field is round, can start from itself, the single-phase motor's magnetic field is the pulsating magnetic field, needs to increase the capacitance or the resistance, and starts the coil, causes it to form the ellipse magnetic field, can start.
- Q:How much force hit the rammer
- The unit that is not a force is an energy unit, usually tons of meters.For example, RAM hammer (diesel hammer) weighs 2 tons, lifting distance of 2 meters, then ramming energy is 2X2=4 tons of meters.
- Q:What materials need to tamper
- This process is called ramming compaction foundation. Before ramming with stones, with four people carrying a ram. Now there is a rammer, more simple.
- Q:How to adjust the ignition timing of gasoline rammer
- The movement of the piston four stroke engine when the valve action must be controlled.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
RM80-1 Robin or Honda Gasoline Engine Rammer Hammer, Stamping Hammer
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 100 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords