*Material: Zinc alloy handle & plate
*Door Thickness: 35-50mm
*Cylinder: 60/70/80mm euro standard mortise cylinder/ B series mortise cylinder
*Key: Normal/Computer key (brass/steel)
*Lock Body: 4550-5050 euro standard mortise lock body
*Door Handle:Reversible for right or left
*Package: Box package, 24 Sets/Ctn
*CTN Size: 63.5x38.5x36.0 cm
*N. W.: 34.2 Kg
*G. W.: 36.2 Kg
A) Variety types for selection
B) Competitive price (China mainland manufacturer)
C) Good quality (ten years experienced technical )
D) Excellent service (years of export experience)
- Q:BYD f3 lock lock on their own opened how the matter
- Hello, check all the doors are closed, check the door lock motor, the control box plug, insurance, relay, line is normal, timely maintenance, thank you [car problems, ask the car master. 4S shop professional technician, 10 minutes to solve. To
- Q:What is good for car door locks?
- Car door locks include a large number of parts that need to be lubricated, and the performance is as follows: () () () () () () () () () () () () () () () () () () 1) long-term, door lock mechanism closed in the door, not easy maintenance, grease should have long-term or even life-long lubrication effect. (2) low temperature, must meet the -40 degrees of low temperature lubrication, the winter will not solidify and freeze, affecting the movement of the lock mechanism. (3) water resistance and anti-rust, the door is not a closed structure, grease should have good water resistance and prevent embroidery. Therefore, the lubrication of this car lock mechanism can not use ordinary lithium-based grease or other mineral oil production of grease, synthetic base oil should be used to produce synthetic synthetic grease or synthetic fat. Set with 130 grams of toothpaste tube package, the effect is very good
- Q:I locked the car door and pulled off the car battery line and how to open the lid is also open
- Hello, you can use the key to insert the door in the main driver's door to open the door. If you still can not open the case, then there is a problem with the lock cylinder. Or inside the link mechanism to play slightly, I wish you a happy car. [Car problems, ask the car master. 4S shop professional technician, 10 minutes to solve. To
- Q:How is the car locked in the car? How does the button fail?
- In theory, the glass can not lift, the car is not completely into the case of water, the water pressure outside the car is very large, can not be opened from the inside. The water inside the car near the full flood, when people should have a short time to focus on physical opening of the door. There is a life-saving life-saving hammer or can open the glass of life-saving items.
- Q:Electric car controller on the root of the door lock line, is a single line, how to pick, useful, affect the output of the transfer line?
- The thick black line is the negative line of the battery. Thick red line is the battery of the positive line, fine red line is the lock line! According to you, you may be wrong line, that is to say you put the fine red line and thick red line directly connected to the battery output on the positive line and not through the lock line. The correct way is to find the lock line, the two positive and negative lines directly connected to the lock. Carefully check, the body to the controller line whether there are other positive lines are controlled by the lock. Five lines of the spin, there are two control the speed of the button line, then do not control it. The other three is the rotation of the positive and negative and signal lines, according to the color can be connected. The general body into the controller line, spin and the speed line is separate, you can in the original controller line to determine the spin line color.
- Q:Motorcycle electric door lock water will not short circuit it
- Motorcycle water that will not be short-circuit, can only cause can not start or run in the flame! Because there are only two electrical functions, first: connected to the circuit, to the entire car power supply. Second: for flameout [ground flame, that is, the ignition ground or ignition coil grounding flame two]. You can try to pull your motorcycle lock plug can be directly activated, but the whole car no electricity! You can not start or stop the road is caused by water into the ground, so turn off the ground is the ground, it may be the black and white line of electric locks and frame insulation caused by lower].
- Q:Consulting car configuration remote control control lock is what?
- Remote control lock (with electronic anti-theft system) is what? Your keys are electronic with buttons that press 4 doors to lock together. Like the remote control as in the car also has a button 4 doors also locked at the same time can also alarm hydraulic power to turn to more effort, effortless ABS + EBD What is this? ABS anti-lock system Tire lock can not turn to the anti-lock + EBD electronic brake force distribution
- Q:Remote control lock and central control lock is one thing, what is the difference ah?
- Of course not the same thing, remote control car lock, as the name suggests, is not a car key can also open the door of the device, and the central control lock is the driver may control the side of the door or other doors open and closed, the driver can be alone Control a door, you can also control all the door locks.
- Q:What is the reason for the lock on the door?
- Hello, need to repair the maintenance plant, are generally motor problems, the motor is damaged, no response
- Q:How to adjust the lock lock
- Should be the controller of the problem, or water short circuit will appear this problem /
All of our products have met ANSI Grade 3 standard. Our company exerts great effort on good management and has been certified by ISO 9001 quality management system. We have a strong quality control team and our own inspection center for testing product endurance, intensity and durability, which ensures high quality standard production. With good quality and great customer service, our products are exported to America, Europe, the Middle East, as well as Asia. Our relentless pursuit for mutual benefit has paved a smooth path for both our customers and us toward sustainable and long lasting business growth.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||20.00% North America
20.00% South America
20.00% Eastern Europe
10.00% Eastern Asia
10.00% Western Europe
5.00% Central America
5.00% Southeast Asia
5.00% South Asia
2.00% Mid East
2.00% Southern Europe
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||10,000-30,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||High and/or Average