Wooden box, or as per the customer’s requirements
CNC machining center, grinding machine, milling machine, drilling machine, horizontal milling machine, chamfering machine, CNC cutting machine etc.
Hardness tester, precision plug gague, gauge block, digital outside micrometer, outside micrometer, digital caliper, inside micrometer, inside dial indicator,
dial vernier caliper, dial indicator, depth vernier caliper and so on
T/T 50% deposit in advance ,50% T/T before shipment ;or others.
CNC center machining, CNC machinin, CNC drilling, CNC turning, grinding, tapping, mould design and processing, casting, sheet mental working etc
Automation machine, medical device, industrial machine, automobile,
electric appliance, and other industries, cnc machining parts, machining parts, hydraulic fittings
1).Swaged Metric Fittings
Mertic Flat Seal Fittings Metric Multiseal Fittings
Metric 60°Cone Seal Fittings Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T Fittings Metric 24°Cone O-RING Seal H.T.Fittings
Metric Standpipe Straight Fittings JIS Metric 60°Cone Seal Fitting
2). Swaged British Fittings
BSP O-RING Seal Fittings BSP Flat Seal Fittings
BSP Multiseal Fittings BSP 60°Cone Seal Fittings
BSPT Fittings JIS BSP 60°Cone Seal Fittings
3). Swaged American Fittings
SAE O-RING Seal Fittings
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
SAE Flange L.T. Fittiings
SAE Flange H.T.Fittings
4). Staplelok Fittings
Banjo Double connection
interlock Hose Fittings
FERRULE for SAE100R1AT/ EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20022 2SN HOSE
FERRULE for SAE100R2A/EN 853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP,4SH/10-16,R12-06-16 HOSE
FERRULE for 4SH,R12/32 HOSE
Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Type Tube Adapters
JIS Metric Thread 60°Cone Adapters
Metric Thread 74°Cone Flared Tube Adapters
BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
JIC 37°Cone Flared Tube Adapters
NPTF Thread Adapters
Note:Special dimension and other standard fitting are available under customers requirements. And OEM/ODM is welcomed.
Application:Automobile,Engineering Machinery,Lathe,Agriculture Machine,Mining,Spurting the Oil Paint, Metallurgy petroleum, Construction, Chemicals,Textile, Ships, Ocean Military, Recreation, Electronics and so forth.
- Q:How can the soft joint of the pipe be elongated during use?
- Do not pay attention to the daily maintenance of pipeline flexible joint, because pipeline flexible joint is composed of a natural rubber and other synthetic rubber formula made in accordance with the proportion, because from the ultraviolet irradiation, the sun is long time exposure, the surface deformation or cracks, and maintenance method has two kinds, one is a surface covering a layer of sunscreen, no requirements of the network, as long as they can block the direct sunlight, the second method is talcum powder on the surface of the rubber joint, but also need to be covered with direct sunlight to place.
- Q:What do you mean by "DN" on hydraulic hose?
- Hydraulic hose temperature: -40 ~ 120 DEG C, product specification range: DN2.5mm ~ DN305mm.
- Q:Flexible rubber joints. What do they mean by flexing?
- In this respect, there are two kinds of materials (or structures): 1) stainless steel, a section of corrugated pipe; 2) made of rubber, that is, when a section of rubber cylinder. There are 2 kinds of parameters, such as diameter, pressure and linking method.
- Q:Three yuan ethylene propylene rubber tube covered with nylon PA66, what glue can not afford the layer?
- The engine parts including inlet system and fuel system, such as engine cylinder cover, solar term door, air filter machine shell, vehicle air horn, automotive air conditioning hose, a cooling fan and a casing, a water inlet pipe, brake oil tank cover and irrigation, etc..
- Q:The use of anti slip rubber joints under what circumstances?
- The appropriate model must be selected according to the working pressure, connection mode, medium and compensation amount of the pipeline, and the quantity is chosen according to the requirements of noise reduction displacement.
- Q:How to determine the parker381 hose joint?
- More knowledge extension: PARKER hose assembly pioneered the use of rubber stripping (No-Skive) do not withhold technology, to avoid the damage caused by removing the plastic hose, the maximum prolong its service life. PARKER KBG hose connector realize the skiving integration design, profile design of sleeve internal special pre withhold is the key to reliable connection. No stripping rubber hose, rubber stripping not withhold joints, without withholding equipment adjustment, a perfect combination of PARKER hose assembly.
- Q:Latex tube, rubber tube, silicone tube, which three of the best tightness?
- Rubber tightest is butyl rubber, rubber pipe products in general, with no fiber layer, expanding 300-500% is no problem, you can put it into the glass tube, depends on the strength of the glass tube and technique.
- Q:Why should liquefied petroleum gas use strong rubber hose and liner?
- Commonly called liquefied petroleum gasMain ingredients: ethylene, ethane, propane, propylene, butane, butene, etc. (oil resistance will accelerate swelling and aging).Appearance and properties: colorless gas or yellow brown oily liquid, has a special odor.In order to remind people of the leakage of liquefied petroleum gas in a timely manner, the processing plant often mixes a small amount of foul odor mercaptan or thioether compounds into liquefied petroleum gas, which is the source of special odor.These gases on the rubber has a certain corrosion, swelling (not resistant to oil will speed up swelling), aging effect, liquefied petroleum, so choose rubber seal to consider oil resistance, corrosion resistance, swelling!
- Q:Can the natural gas hose not exceed 1.5 meters or 2 meters?
- If the gas is longer, to Caution! Protective tube wall, as far as possible, to prevent accidental damage risk of gas pipe.
- Q:Do I need a shim for the flat metal hose joint?
- If the two connections are flat, they must be placed gaskets, usually with PTFE gasket.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range