Reusable Fitting BSP Female 60 Deg Cone DN11
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 80000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Reusable Fitting BSP Female 60 Deg Cone
PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
DN | DASH | C | S2 | S2 | ||
P22618D-04-04 | G1/4"-19 | 6 | 04 | 5.5 | 19 | 19 |
-06-06 | G3/8"-19 | 10 | 06 | 6.3 | 22 | 22 |
-08-08 | G1/2"-14 | 12 | 08 | 7.5 | 27 | 27 |
-10-08 | G5/8"-14 | 12 | 08 | 9.5 | 30 | 30 |
-12-08 | G3/4"-14 | 12 | 08 | 10.9 | 32 | 32 |
-12-12 | G3/4"-14 | 20 | 12 | 10.9 | 32 | 32 |
-16-16 | G1"-11 | 25 | 16 | 11.7 | 41 | 41 |
-20-20 | G1.1/2"-11 | 32 | 20 | 11 | 50 | 50 |
Packing | Wooden box, or as per the customer’s requirements |
Processing equipments | CNC machining center, grinding machine, milling machine, drilling machine, horizontal milling machine, chamfering machine, CNC cutting machine etc. |
measure equipment | Hardness tester, precision plug gague, gauge block, digital outside micrometer, outside micrometer, digital caliper, inside micrometer, inside dial indicator, dial vernier caliper, dial indicator, depth vernier caliper and so on |
MOQ | negotiable |
precision | +/-0.01mm |
Payment | T/T 50% deposit in advance ,50% T/T before shipment ;or others. |
Business scope | CNC center machining, CNC machinin, CNC drilling, CNC turning, grinding, tapping, mould design and processing, casting, sheet mental working etc |
Application | Automation machine, medical device, industrial machine, automobile, electric appliance, and other industries, cnc machining parts, machining parts, hydraulic fittings |
We have experience with over 3000 types of high pressure fittings,
and if we know the dimensions, we can supply them even without drawings.
Our rolling machinery's range of application is narrow compared with threaded processing on
an NC lathe using a threaded tip, but the cost and speed benefits are considerable.
We can supply a wide range of high-pressure fittings in sizes from 1/4 to 2 inches.
Specifications
hydraulic hose fitting
Carbon Steel
Hose fitting Series
1) Material:carbon steel
2) Different sizes available
3) Zinc plated
- Q:How to replace natural gas hose? Steps?
- Replace the natural gas hose first pressure relief, and resolutely put an end to the operation with pressure;According to the connection way of the hose, if it is O ring sealed, just tighten it directly;If it is cone thread, it can be wrapped with raw material tape or sealant.
- Q:What's the difference between a vulcanized rubber tube and an intake manifold?
- The inlet is the passage of air into the engine block, which leads to the cylinder. The valve is mainly composed of a channel designed on the cylinder head, and the inlet is controlled by an air inlet valve at the end of the air inlet
- Q:Why can the air conditioning connection be made of copper tube? How about rubber tube and aluminium pipe? Please heroes pointing for the dishes.
- The pressure of the aluminum pipe is relatively small. "Again, when the aluminum pipe is too soft, it is easy to be flattened.".. Rubber tubes will decay if they are used! Withstand pressure is also high!
- Q:How to make sure the rubber hose will not be worn off?
- The ink jet machine can mark the laser marking machine on the pipe, and then mark the joint on the joint
- Q:What are the materials used in rubber joints? What are their advantages?
- Material has ordinary natural rubber, three yuan ethylene propylene (EPDM), nitrile and so onTo choose a different material, it depends on what kind of medium to go
- Q:What does the letter of the high-pressure tubing connector mean?
- Purpose: high pressure tubing tubing steel wire spiral reinforced layer and wear resistant synthetic rubber composition used for conveying high pressure, engineering machinery hydraulic oil, gas, petroleum, submarine irrigation, steel mills, chemical plants and other media.
- Q:The main features of Linatex rubber tube or what are the characteristics?
- Linatrile: silicone reinforced rubber. It has the properties of wear resistance, oil resistance, aging resistance, fatigue resistance and good air tightness.Linard HD: carbon black / silica reinforced natural / synthetic rubber, hardness 60-70IRHD. With abrasion resistance, high resilience, cutting resistance, tear resistance, impact resistance and so on.
- Q:Does the rubber tube affect the engine in the car's tank?
- I don't know what you mean by that, but the car's tank itself needs to be sealed and no clutter is allowed
- Q:How to remove hose odor?
- When rubber is peculiar, it can be scrubbed by hydrogen peroxide. After drying, the odor will disappear. Or with waste tea sent to rubber products, tea has the role of adsorption odor.
- Q:The use of anti slip rubber joints under what circumstances?
- When the pipe produces instantaneous pressure and is greater than the working pressure, it should choose a joint higher than the working pressure and one gear. For example, when the pipe starts at an instantaneous pressure of >1.0MPa, the 1.6MPa shall be used as the joint. When the instantaneous pressure is >1.6MPa, the joint of 2.5MPa shall be used.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Reusable Fitting BSP Female 60 Deg Cone DN11
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 80000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords