Order On-line Tracking
JF-4 is made of set retarder and water reducing agent.
JF-4 can delay the setting time of concrete, hold the plastic of freshly mixed concrete in the long term
and be good for moulding by casting under the condition of high temperature in summer.
When JF-4 applied to guss concrete, it can increase the cohesiveness of the concrete and reduce
slump loss, concrete disintegration and concrete bleeding.
JF-4 can reduce the hydration heat and temperature crack, and also can delay the peak
heat release, when a mass concrete is concreting continuously.
JF-4 is essential to additive in the summer of concrete construction.
JF-4 is applicable for commodities which are concreted by various portland cement,
pump concrete and mass concrete.
JF-4 isn’t suitable for the steamed concrete and cement admixture which is made by anhydrite and fluorgypsume.
Dosage: for powder 0.5-1.0%. for liquid 1.5-3.5%
Adding 1.0%; retarding time: 1 – 3 hours.
Air content increased slightly.
Retention value of slump constant: 1h≥90%
Use it in the above 5 degrees celsius temperature conditions
Cement paste fluidity(mm)
Moisture content of Power (%)
Chloride ion (%)
Liquid density ((20℃))
Water reducing rate (%), ≥
Ratio of bleeding rate (%), ≤
Air content (%), ≤
Difference in setting time（min）
Ratio of compressive strength (%), ≥
Ratio of shrinkage（%）, ≤
Conclusion: the project is in line with retarding index of “water-reducing admixture” of GB8076-2008.
Powder JF-4 is available in 25kg film-lined bags. Liquid JF-4 is available in sealed plastic or iron tank.
Other special package can also be available according to prior consultation.
Special measures should be taken to ensure entire package. Keep waterproof during transportation.
Dry and well ventilated warehouse is needed for storage to prevent absorption of moisture and agglomeration.
If storage has surpassed the time, test must be done to confirm the validity.
1.Q: What is MOQ?
A: Our MOQ is 1 TON.
2.Q: Could you offer free sample?
A: We can provide free samples to you for quality testing.
3.Q: What about your packing?
A: For liquid: Flexitank, or IBC tank 1000L
For powder:Woven fabric bag with plastic film liner( 25kg or 1000kg)
Clients’ packing is workable.
4.Q: How about your productive capacity?
A: 150000 tons/Year.
5.Q: What is your delivery time?
A: Within 7 days after received deposit or L/C at sight.
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|