Resin P408

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
20Ton m.t.
Supply Capability:
5000 Ton/Month m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Property of Resin P408

• High tenacity and good mechanical function.

• Excellent oil-proof, temperature-proof and anti-corrosion.

• Lloyd's Registered

 

Applification of Resin P408

• Various temperature-proof FRP products.

• FRP boats, such as fishing boat, marine/yacht, life boat, etc.

• Can be used in hand lay-up, spray-up and filament winding process.

 

Specification of Resin P408

Item

Value

Test method

Tensile Strength (MPa)

90

GB/T 2568-1995

Tensile Modulus (Gpa)

7.3

GB/T 2568-1995

Flexural Strength (MPa)

150

GB/T 2570-1995

Flexural Modulus (MPa*103)

4.8

GB/T 2570-1995

Barcol Hardness

53

GB/T 3854-1983

Glass Fiber Content, Wt%

25~30

/

1.Typical properties; not to be construed as specification; values reported by GB standards

2. Cure schedule: 24 hours at room temperature; then 2 hours at 120°C(250°F)

3. 4mm laminate construction: HLU, S/M/M/M/S, S=continuous veil glass, 30g/m2; M=chopped strand mat, 450g/m2

 

Packing & Storage of Resin P408

• The product should be packed into clean, dry, safe and sealed container, net weight 220 Kg.

• Shelf life: four months below 25℃, stored in cool and well ventilated place.

 

 Resin P408

 

 Resin P408

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the reason that the performance of self - curing resin is lower than that of heat - curing resin?
Weather resistanceWeather resistance is one of the main characteristics of silicone resin and is widely used as base material for weather resistant coatings. The simplest way to test the weather resistance of coatings is to expose the test panels coated with silicone to the outside, and to observe the changes in gloss or color of the coating, as well as cracking. But because sunlight exposure, the specimens received in outdoor temperature changes, rain, snow, wind and frost attack, floating in the air and dust pollution of various chemical substances are not the same, so it is difficult to have strict standards. Making comparison and analysis difficult. In addition, the results of the cycle is long (in years), so the use of this method has been less, and now use accelerated aging test machine, to obtain weather resistance data. Under the condition of accelerated test, the coating gloss 60%, alkyd resin coating is 250h, containing 30% (mass fraction) silicone alkyd resin coating is 750H, containing 50% (mass fraction) silicone alkyd resin coating is 2000h, and the silicone coating after 3000h, the gloss retention is still higher than 80%. Among the many factors that cause coating aging, sunlight, especially ultraviolet radiation, is the major cause of low gloss and powder surface. It is known that the light spectrum in the wavelength spectrum of the solar spectrum on the earth's surface is very sensitive, which is the root cause of the poor weather resistance of organic resins. Known, methyl siloxane hardly absorb the ultraviolet light, containing PhSiO1.5 or Ph2SiO links are only following the absorption of 280nm silicone (including a small amount of ultraviolet light), the sun has little effect on the silicon resin, which is the main reason of silicon resin coating with excellent weatherability.
Q:What is the use of self - hardening furan resin? Where should I use it?
Properties and applications of furan resins: uncured furan resin has very good miscibility with many thermoplastic and thermosetting resins, so it can be modified with epoxy resin or phenolic resin.
Q:Is resin the term plastics, right?
Natural resin is an amorphous organic matter from the secretions of plants and animals in nature, such as rosin, shellac, amber, etc..
Q:What's the difference between epoxy and polyester?
The difference between them is that the different functional groups, there are certain epoxy epoxy, phenolic hydroxyl and phenolic aldehyde condensation and bond, acrylic resin thermoplastic and thermosetting thermosetting epoxy for class two, the polymerization and curing amine anhydride, phenol is thermosetting, but sometimes alone, for example made phenolic paint
Q:What is called regeneration of ion exchange resins?
The regeneration of the resin shall be based on the type and characteristics of the resin, as well as the economy of operation, and the proper regeneration agent and working conditions shall be chosen.
Q:Difference between vacuum pouring dry type transformer and epoxy resin casting dry type transformer
Vacuum pouring dry type transformer and epoxy resin casting dry type transformer should not have qualitative distinction, use all is insulation. At present, the vast majority of dry type transformers in the market are vacuum epoxy resin casting dry-type transformers, which are seldom poured by other insulating materials.
Q:What are the differences and uses of resins, plastics, acrylics and PVC?
Resin is the main raw material for making plastics and also used to make paints.
Q:I'd like to use talcum powder as fiberglass resin filler. I don't know what specifications
As the product filling material also has the difference, if is the resin handicraft, some to reduce the cost, the resin fills the material proportion to be very big, for example 1:1 proportion, thick and thin padding, again 1:1, uses talcum powder not to be suitable. Talc powder, though fine, will lose its permeability at the same filling ratio. The difference of course process sometimes does not consider these factors, such as coloring crafts, glass or steel products, is a completely filled, then to add the appropriate proportion according to the technological difference, the proportion in the industry did not add specific differences, such as pressing, filling and hand paste, in accordance with the requirements of products reasonable to add.
Q:Epoxy resin conductive, do not let it conductive, can you?
Epoxy resin paint is divided into ordinary epoxy floor paint (improve floor abrasion resistance, beautify the environment) and special floor paint (anti-static, anti-corrosion, fire protection, etc.)
Q:How much is the epoxy floor?
Epoxy resin floor construction process is as follows:The ground is polished and cleaned;A primer, coating, coating amount to the foot, usage is 0.2kg/ square meters;Scraping a solvent-free coating mortar, use is 0.3kg/ square meters; according to the actual situation on the ground to set the coating number;Scraping two times epoxy putty, usage is 0.2kg/ square meters,Roll two times epoxy topcoat, usage is 0.3kg/ square meters, do self leveling, first scraping a top paint, the use of 0.1kg, then a top paint coating, the use amount is 1.0kg/ square meters.
We are a well-known enterprise specializing in the production and sales of high-grade fiberglass mesh, is a direct supplier for fiberglass mesh. Since the establishment of our company, we have been devoted to setting up a good CIS and completely implementing ISO9001 quality management system.

1. Manufacturer Overview

Location Tianjin, China
Year Established 1989
Annual Output Value Above US$ 3 Million
Main Markets Mid East; Eastern Europe; North America
Company Certifications ISO 9001

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Tianjin
Export Percentage 21% - 30%
No.of Employees in Trade Department 5-10 People
Language Spoken: English; Chinese
b)Factory Information  
Factory Size: Above 3000 square meters
No. of Production Lines Above 5
Contract Manufacturing Design Service Offered
Product Price Range Average