Rated voltage 10KV or lower Aerial Bounded Cable ABC

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
100 m
Supply Capability:
10000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Application

It is used to rated voltage U (Um) 10 (12 kV) overhead power lines, copper or aluminum conductor, XLPE or High-density PE insulated overhead cable.

 

Type & Specification

 

Voltage

10 kV

 Type

JKYJJKTRYJJKLYJJKLHYJJKYJKTRYJKLYJKLHYJKLYJ/QJKLY/QJKLHYJ/QJKLHY/Q

 Sizemm2

Core10400

Standard

GB∕T 14049-2008

 

The maximum allowable operating temperature of cable conductor (with load-bearing structure): XLPE insulation 90;high-density PE insulation 75.

When short circuit (the maximum duration is no more than 5 seconds) cable maximum temperature should not exceed: XLPE 250;high-density PE insulation 150.

Cable laying temperature should not be less than -20.

Cable bending radius no less than the cylinder diameter for cable bending test.

 

Structure

Application

It is used to rated voltage U (Um) 10 (12 kV) overhead power lines, copper or aluminum conductor, XLPE or High-density PE insulated overhead cable.

 

Type & Specification

 

Voltage

10 kV

 Type

JKYJJKTRYJJKLYJJKLHYJJKYJKTRYJKLYJKLHYJKLYJ/QJKLY/QJKLHYJ/QJKLHY/Q

 Sizemm2

Core10400

Standard

GB∕T 14049-2008

 

The maximum allowable operating temperature of cable conductor (with load-bearing structure): XLPE insulation 90;high-density PE insulation 75.

When short circuit (the maximum duration is no more than 5 seconds) cable maximum temperature should not exceed: XLPE 250;high-density PE insulation 150.

Cable laying temperature should not be less than -20.

Cable bending radius no less than the cylinder diameter for cable bending test.

 

Structure


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The UV lamp is fitted with ozone and no ozone difference
. like the computer boot fast, the best way is solid state hard drive, followed by the win. the system is very good, the interface is also familiar with the boot fast, especially the new browser edge than a lot stronger; . if you now computer The monitor is also good, and now the computer's hard drive can be taken down to the new computer above, then 3000 yuan can buy very very good, desktop. If the notebook is about 4500 or so relatively high cost. . do not recommend the configuration of their own one by one to buy accessories, it is recommended that you look at the top of the machine installed Taobao business, they rely on the volume, not only to ensure that the genuine accessories, the price is relatively cheaper to buy their own, And wiring installation are also professional. And they are equipped with win7 is free to upgrade to win. very good. I just bought a few days ago a machine, monitor and hard drive or use their original, with the host with the solid-state hard drive as a boot disk, their hard drive as a storage disk, spent a total of . the performance is very good.
Q:We say that the size of power cable is 4 core, 150 sq.mm. What would be the diameter of this cable ???
A 4core (electrical) cable of that strength is usually built up from quarter circle shaped sectional wires. (Think of a pizza cut into four even pieces.) So, calculate the outside diameter from this point and add 4 times the insulator thickness. Example: 400V 4core cable has very likely 1mm insulator thickness. 150mm² * 4 cores is 600mm² total. By A=PI*d'*d'/4, d' being the diameter without insulator, would be d'=2*sqrt(A/PI)=600mm²/3.1415...=2*sqrt(...‡ Now, as said above, add the 4 insulator layers, and then you would be at approx. 31.7mm outside diameter.
Q:What accessories/cables should I buy for this apple computer?
Power cable, USB keyboard, USB mouse. That's it. Find a power cable (any old computer power cable will work) and see if it even powers on and does anything first. Crack it open. Set it on its face, then undo the three screws across the bottom. They do NOT come out. They only loosen up until you can't turn them anymore. The back pops off. Look for any swollen or leaking capacitors. If you find any, then it's junk. If you don't, then see if there's any RAM in it. If not, toss some PC3200 DDR RAM in there and see if you get anything.
Q:how do i hook the power cable to my amp w/o killing myself?
disconnect the battery dumbass
Q:sata power cable problem?
first of all do you have another sata power connector you can plug into the hard drive? if you do then try that. or do you have a spare sata drive you can plug into the current power adaptor? if the drive functions correctly from the change in power adapters or the spare drive has issues your power supply may be bad. otherwise you may want to contact the manufacture of the hard drive and do a warranty replacement. or just buy a new hard drive. chances are your hard drive is going to fail on you. either that or make sure the connection is secure and don't hit your pc Note if your optical drive is sata as well swap the connections from drive to drive and see if your disk drive acts up instead of your hard drive.
Q:can a Power supply electrocute you?
I'm willing to bet that there's people out there who'll debate me on this, but the answer is a nutshell both yes and no. Part I: As for having the power supply out in the open the answer is generally no, assuming you have it on a non-conductive surface such as a sheet of cardboard, assuming your carpet has any grade of nylon in it, and assuming the wiring in your house is well-grounded. Part II: I doubt it, but it'd be a better idea if your plugged it into the motherboard first, then to the power supply, then the wall. Part III: Both yes and no. It really depends on a small number of factors like how well grounded (electrically) it is. However, liquids and electricity of any type are NEVER a good mix. Part IV: Don't even think about it. Aside from something extreme like oh say a fire, there's no surer way to kill a motherboard than to disconnect the connector while powered-up.
Q:What causes a laptop power cable to be loose?
Pulling on the cable will cause the jack to become deformed, and cause poor connections. You will have to replace the jack. On some laptops, it is an internal plug in module that is easy to replace, on others it is soldered to the motherboard, a much more expensive repair....
Q:i have power in half of the power cable connected to my amp, how can i fix it?
I okorder.com/... Under the column for 90 degree cable in copper pick the wire gauge that is closest to your amp requirements without being under. For example: 1200 watt amp = 100 amps of power 2 gauge copper can handle 130 amps (This chart is missing 3 gauge which some places do carry, which can handle 110 amps) 4 gauge is only good for 95 amps. These ratings are about heat build up from inductance of the current. When the heat exceeds the rating, the sheathing melts and conductor degrades at it's weakest point. I recommend use of THHN electrical wire. It is gas and oil resistant and has heavy strands that hold up well to the stress of vehicle install situations. If your wire and fuses are properly sized, then check all of your connections. Often times heat and vibration will loosen screws on amplifier contacts. Also, under the hood, heat can melt your fuse holder causing plastic to coat the contact points (in which case you'll need a small file to clean the contacts) There's really a lot of possibilities here and your question is quite vague and convoluted. Please give more details or take some time and analyse the problem carefully. Chances are that you will discover the source of the problem in a matter of just 15 minutes or so of checking.
Q:PC power cable problems?
The cable seems to be rated higher than your input voltage so you should be okay.
Q:What kind of power cable do i need for a VIA VT6421A IDE & SATA RAID PCI Controller Card?
I agree completely with the reply above However SOME eSATA cards that have external power jacks to power the external drive will have either a four pin Molex plug (same as an IDE/PATA drive) or a Floppy power plug. And back in the day when Firewire was more common any good firewire card had a power socket on it, again, either a Molex plug or a floppy power plug. AD

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range