High speed rolling door:
a) Rapid rolling door motor
b) Soft curtain door
c) Photoelectric safety Protection device
High speed rolling door Product configuration:
1) Rapid rolling door motor
2) Soft curtain door:
High strength PVC knife coating fabric,curtain thickness 1MM. The base and middle parts are arranged in the windproof reinforcing bar.
It can prevent wind strength up to 5000N.
Available clour: White, Yellow, Orange, Red, Blue, Grey, Black, Green
3) Door frame,door slot
Quality anti-corrosion metal door frames, door cover and gate slot thickness 2.0MM. (Color: milky white/ silver)
the connecting piece and the fastening screw
PLC program control door operation
360 pulse encoder control (can precisely control the stroke)
control door body running speed
24VDC(safety DC voltage)
1.5mm above the ground a transparent observation window -
transparent PVC material (highly depending on the situation)
door body moves downwards, when the test is applied to
object to the door body inversion
The door body running speed
Optional spare parts:
- Q:Glass and steel doors and windows and aluminum doors and windows What is the difference
- There are many kinds of FRP is now commonly used in the kind of white called steel doors and windows He and aluminum doors and windows of the main difference is that the seal
- Q:Aluminum doors and windows how to change the anti-theft window
- Aluminum alloy to replace the practical value of insulating glass is even higher than the replacement. Because the installation of insulating glass need to replace the glass port of the profile, in the replacement of the profile with the original window frame is not matched.
Suggest the whole re-replacement, not because of small lost, self-defeating.
- Q:Titanium magnesium alloy door can change color?
- Can change color.
Titanium magnesium alloy door color is generally paint.
If you have installed, you need to remove the factory sent to the factory processing, drying.
- Q:Aluminum alloy doors and windows of the specific aspects of how the calculation
- Each type of profile has its own calculation formula, the calculation formula is summed up in the actual work and calculated, and now the profile model too much, each area of the profile is not the same, you can combine the profile table settlement I do not know which area you are in. I give you a very common calculation of the 70 formula, but this is not very absolute, and sometimes this type of material in the decline in the difference (the glide of the slide height Not the same), basically produced by this formula: a: no windows on the beam
1: Border = height of the window
2: up and down = window width -2 cm
3: hook light Kai = border -5.2 cm
4; up and down = up and down ÷ 2 + 0.5 cm (see details of the size of the three fans)
5: glass high = check light Kai -9.3 cm
6: glass width = upper and lower -6 cm (three fans in the middle of the big fan-7 cm)
7: yarn fan height = border -5 cm
8: yarn fan width = up and down +1 cm
Two: the window with the beam
1: Border = height of the window
2: Upper. Medium. Lower = width of window -2 cm
3: hook light Kai = cross the number of -1.2 cm
4: up and down = upper and lower ÷ 2 + 0.5
5: Board. Neutral = Border - Scribe Number 7 cm
6: hanging wire horizontal length = diameter -0.6 cm
7: Closed thread vertical = neutral. Board-1 cm (button cutting angle)
8: glass height = scribing number -10.5 cm (also = hook light -9.3 cm)
9: Glass wide as above
10: yarn fan height = scribing number -0.5 cm
11: yarn fan wide on the same
Three: three fan of the exception size (non-standard material to rely on their own to the amount and calculation)
1: three fans of the small fan up and down = (down +9) ÷ 4-1.8 cm
2: three fans of the big fan up and down = (down +9) ÷ 2
3: small fan of the glass above the same
4: large fan of the glass height, wide = up and down -7 cm
- Q:Engineering materials, aluminum doors and windows need to check it, I am a party unit?
- General manufacturers can be out
- Q:Bathroom aluminum door handle lock how to lock the cylinder
- This thing belongs to a product. Can only put the two hat worn out to take out. The other side of the iron can be pulled out.
Usually the aluminum alloy is too thin when the connection strength is too low, for the use of rivet or rivet nut can greatly improve the connection strength. Rivet nuts can be easily disassembled using threaded connections, but the cost is too high. Pull rivet cost is low, the strength can be guaranteed, but not easy to disassemble. If the angle grinder is very convenient.
- Q:Where can I find metal doors?
- Yeah, Home Depot for about 140 dollars. No windows,steel entry door, with wood core. Reliable doors with tons of strength if installed correctly. With a deadbolt or two you will have a very strong door.
- Q:Balcony of the aluminum alloy door how to install it?
- There are many types of balcony doors, the mainstream of hanging doors, sliding doors, folding doors, Pingkai Men, etc., choose what type of door need to take into account the home environment and decoration style, the general use of large sliding doors, small space can be Choose a folding door or open the door.
- Q:I have a metal entry door with a full length glass storm door. It gets so hot in the?
- switch to a solid door, those inserts are cheap plastic trash and they come loose and leak from old age not just heat. white is the coolest color and any other color will make it hotter. the bottom of the door has room so adjust it to leave a gap for fresh air to get in and you can peel the weather stripping off of the door at the top so it lets some of the heat out. the best solution is to tint the glass with a reflective (mirror look) light smoke window tint so its not dark but it blocks out a lot of the heat
- Q:how to paint metal front door?
- Make sure the door is preped good. Its not about the brush but more about the paint! The paint should be an outdoor paint suitable for metal applications! Good luck!
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range