PVC Tubes UPVC Drainage Pipes with Good Quality on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:What are the different colors of plastic tubes available?
- The different colors of plastic tubes available vary depending on the manufacturer and intended use. Some common colors include clear, white, black, blue, red, green, and yellow. However, there can be a wide range of other colors available as well, depending on specific requirements and preferences.
- Q:Can plastic tubes be used for medical purposes?
- Yes, plastic tubes can be used for medical purposes. They are commonly used in clinical settings for various applications such as administering medications, draining fluids, and delivering nutrients. Plastic tubes used in medical procedures are often made from materials such as polyvinyl chloride (PVC) or silicone, which are designed to be safe and compatible with the human body.
- Q:Can plastic tubes be used for vacuum applications?
- Yes, plastic tubes can be used for vacuum applications. However, it is important to choose the right type of plastic material that is compatible with vacuum conditions and has sufficient strength to withstand the pressure difference.
- Q:I have a KN in my 2000 Grand Prix Gt has the 3.8. Well I was looking into getting either a KN for a 97 Silverado 5.7 1 ton. Do the chrome air tubes have much of a different sound than a plastic air tube? I am looking on OKorder and found cheap ones vs getting the KN. All comments and suggests will be appreciated.
- well chrome ones will heat up more than the black plastic ones defeating the purpose of a cold air intake.
- Q:Can plastic tubes be labeled with product information?
- Yes, plastic tubes can be labeled with product information.
- Q:I have a pond pump and standard aquarium plastic tubing. I will be drilling tiny holes in equal increments throughout the tubing to release the air. Is there an equation to show the air pressure that will be released through the holes? I would like to know how many holes I need and how far to space them to achieve a certain amount of air pressure to be released from a specified length of tubing.This is a test and will not be done under water. A simple diffuser will not work for this application.Ideally I would like a formula where I can input the following and get a result:Tube LengthTube DiameterPump PSITube Hole SizeTube Hole QuantityTube Hole SpacingResultAirflow per Tube HoleAny help would be greatly appreciated. If you need more information please let me know.Thank you,
- The flow rate under water will be quite different from the rates in air. Unless all holes are at the same horizontal level the flow rates will vary. As a general rule, the total cross sectional area of all holes must be below 14% of the cross sectional area of the tube to ensure equal flow from each hole along a long length of tube. Along with the pump PSI (What sort of pump? Diaphragm, piston, centrifugal?) the maximum out put is also a factor. If it is a positive displacement pump the full capacity will be distributed through whatever holes are available with the pressure increasing to achieve this.. hyperphysics.phy-astr.gsu.edu/Hba...
- Q:What are the different ways to cut plastic tubes?
- There are several different ways to cut plastic tubes, including using a saw, a utility knife, a tube cutter, or a hot knife. The method used may depend on the thickness and type of plastic, as well as the desired precision of the cut.
- Q:Are plastic tubes suitable for industrial automation?
- Yes, plastic tubes are suitable for industrial automation. They offer various advantages such as being lightweight, flexible, and resistant to chemicals, which makes them ideal for use in automated systems. Plastic tubes can be easily integrated into robotic arms, conveyor belts, and other automated machinery, providing efficient and reliable transport of fluids, gases, or other materials in industrial settings.
- Q:Are plastic tubes resistant to discoloration from oils and greases?
- Yes, plastic tubes are generally resistant to discoloration from oils and greases.
- Q:I have a Katadyn Vario pump for camping and haven't used it in eons (7 years or so) and I took it apart to clean it.For now, and for future reference, how can I clean the actual intake/outlet plastic tubes? The inlet tube is inserted into gross pond/lake or running stream water, so it's already contaminated. I would love to be able to wash this tube for SURE, safely at home.(The O-rings are still well-lubed, and I've ordered new activated carbon to refill the glass fiber filter.)
- Use a weak chlorine bleach solution.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Tubes UPVC Drainage Pipes with Good Quality on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords