PVC Tape of Good Waterproof Dampproof and Insulation for Pipe Wrapping
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 roll
- Supply Capability:
- 1000000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of PVC Tape
PVC tapes are made of soft pvc film coated with rubber pressure-sentitive adhesive.
Application of PVC Tape
PVC tapes are widely used in auto harness, wrapping of wire, and insulation protection. It is the main insulation material of automobilehousehold electrical apparatus.
Advantage of PVC Tape
Corrosion protection for metal piping systems above and below ground.
Corrosion protection for fittings and joints on mill coated pipe.
Corrosion protection of electrical conduit & fittings.
Resists corrosive action by salt water, soil acids, alkalies and salts.
Prevents dielectric corrosion between buried steel pipe and soil minerals.
Packing of PVC Tape
Jumbo rolls & log rolls: Packed with kraft paper and stretch wrap film, with or without pallet.
Cut rolls: Shrink package, placed in cartons, with or without pallet.
Jumbo rolls & log rolls: Packed with kraft paper and stretch wrap film, with or without pallet.
Size of PVC Tape
Paper Core ID: 32mm, 38cm
Jumbo size: 1.25m x 20m, 1.25m x 33, 1.25m x 50m
Cut roll size: As per customer's requirement
Cut rolls: Shrink package, placed in cartons, with or without pallet
Pictures of PVC Tape
Specification of PVC Tape
| Carrier | Soft PVC film |
| Adhesive side | Single side |
| Adhesive | Rubber pressure-sentitive adhesive |
| Color | White/yellow/black/orange /brown/blue/red/ green |
| Normal thickness | 130mic,150mic, 160mic, 170mic, 180mic, 190mic, 200mic |
| Packaging | Single packed, shrink film packed, depend on customer’s request |
Remarks:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and kept from wet and heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
FAQ
1. What is the range of your products?
So far, we manufacture various kinds of double sided adhesive tape, masking tape, kraft tape and BOPP packing tape. To better meet your needs, we can also source other adhesive tapes for you if it is appropriate to do so.
2. What's the lead time for delivery?
We ensure you a prompt delivery of the goods. We do not stock any of the goods. The production cycle time of 1*20FCL is 2-3 weeks.
3. How many carriers does your double sided adhesive tapes have?
There are many carriers that our double sided adhesive tapes based on, which are tissue, PET, BOPP, PE foam, EVA foam.
4.Can you accept the cooperation way of OEM?
Upon receipt of formal authorization, we can accept OEM processing.
- Q:How does packaging tape perform on high-gloss surfaces?
- High-gloss surfaces are well-suited for packaging tape, as it excels in its performance on such surfaces. The adhesive used in packaging tape is specifically formulated to adhere to a wide range of materials, including glossy surfaces like plastic, glass, or coated paper. By creating a strong bond, the tape ensures the package remains securely sealed. It firmly sticks to the high-gloss surface, preventing any peeling or shifting during transport or storage. Furthermore, packaging tape typically possesses moisture resistance, further enhancing its effectiveness on glossy surfaces. In conclusion, packaging tape offers a reliable and professional solution for sealing packages on high-gloss surfaces, guaranteeing security and protection.
- Q:Can packaging tape be used for sealing plastic clamshell packaging?
- Indeed, plastic clamshell packaging can be effectively sealed using packaging tape. Tailored to securely seal a wide range of packaging materials, packaging tape boasts a robust adhesive bond that effectively binds the clamshell packaging, thereby preventing any unwanted opening during the transportation or handling stages. Moreover, the durability and tear resistance of packaging tape guarantee the continuous protection and sealing of the clamshell packaging throughout the entirety of its distribution journey.
- Q:How do you remove packaging tape without leaving residue?
- To remove packaging tape without leaving residue, you can try using a hairdryer to gently heat the tape. This will help loosen the adhesive, making it easier to peel off without leaving any sticky residue behind. Additionally, using a rubbing alcohol or vinegar solution can help dissolve any stubborn residue that may be left behind. Just apply the solution to a cloth and gently rub the area until the residue is gone.
- Q:How do I cut packaging tape without scissors?
- One way to cut packaging tape without scissors is by using your teeth. Simply hold the tape between your fingers and bite down firmly, then pull your head back to tear the tape. Alternatively, you can use a sharp object like a knife or a box cutter to cut the tape by pressing it against the tape and pulling it in a swift motion. However, be cautious when using sharp objects to avoid any injuries.
- Q:What are the benefits of using silent packaging tape?
- Silent packaging tape offers several benefits including noise reduction during packaging, increased productivity due to minimized distractions, improved customer satisfaction by avoiding noisy packaging, and a more pleasant work environment for employees.
- Q:How do I prevent packaging tape from leaving a sticky residue?
- To prevent packaging tape from leaving a sticky residue, there are a few simple steps you can take. 1. Choose the right type of tape: Opt for high-quality packaging tape that is specifically designed to leave minimal residue. Look for tapes with a low-tack adhesive or those labeled as residue-free. 2. Clean the surface: Before applying the tape, make sure the surface is clean and dry. Wipe away any dust, dirt, or grease using a mild detergent or a rubbing alcohol solution. This will help the tape adhere better and reduce the chances of residue formation. 3. Test in a small area: If you're unsure about the tape's residue potential, it's always wise to test it in a small, inconspicuous area first. Apply a small piece of tape and let it sit for a few hours or overnight. After removing it, check if any sticky residue is left behind. If not, you can proceed with confidence. 4. Remove tape gently: When removing the tape, do it slowly and at a low angle, preferably parallel to the surface. Pulling it too quickly or at a high angle can increase the chances of leaving behind sticky residue. Take your time and be patient to avoid any damage or residue. 5. Use heat or solvent if needed: In case some residue remains, you can try using gentle heat or certain solvents to remove it. For heat, you can use a hairdryer on low setting to warm up the residue and then wipe it away with a clean cloth. If needed, you can also try using rubbing alcohol, white vinegar, or adhesive remover by applying a small amount on a cloth and gently rubbing the residue until it dissolves. By following these tips, you should be able to prevent packaging tape from leaving a sticky residue and maintain a clean surface.
- Q:How is packaging tape different from regular tape?
- Packaging tape is different from regular tape in several ways. Firstly, packaging tape is designed for heavy-duty use and is specifically made to securely seal boxes and packages for shipping or storage. Regular tape, on the other hand, is generally used for lighter tasks such as gift wrapping or arts and crafts. Secondly, packaging tape is typically wider and thicker than regular tape, providing better strength and durability. This ensures that packages remain securely sealed during transportation and handling, reducing the risk of damage or tampering. Furthermore, packaging tape often has specific features that regular tape may not have. For example, some packaging tapes are designed to be water-resistant or have reinforced fibers for added strength. These features are crucial in protecting packages from moisture, ensuring that the tape does not easily tear, and providing extra security for valuable or fragile items. Lastly, packaging tape often comes in larger rolls or dispensers, allowing for efficient and continuous application. This is especially important when sealing multiple packages or dealing with larger items. Regular tape, on the other hand, is typically available in smaller rolls or individual pieces, making it more suitable for smaller-scale tasks. In summary, packaging tape differs from regular tape in terms of its intended use, strength, durability, specific features, and size options. Its purpose is to provide a reliable and secure seal for packages during transportation and storage, making it an essential tool in the logistics industry.
- Q:How does packaging tape perform in dusty environments?
- Packaging tape generally performs well in dusty environments, but its effectiveness may vary depending on the specific conditions and the quality of the tape. Dust particles can potentially interfere with the adhesion of the tape, making it less sticky and less reliable in securing packages. However, most packaging tapes are designed to be resistant to dust and other contaminants, and they have a strong adhesive backing that can withstand moderate levels of dust. In dusty environments, it is recommended to choose packaging tapes that have a higher tack or adhesive strength. These tapes are specifically engineered to provide better adhesion and stickiness, even in dusty conditions. Additionally, selecting tapes with a thicker backing material can also help to prevent dust particles from penetrating through the tape and compromising its adhesive properties. It is important to note that excessive dust accumulation may still impact the performance of packaging tape, especially if the dust is fine and abundant. In such cases, it is advisable to regularly clean the package surfaces before applying the tape to ensure optimal adhesion. Adequate surface preparation, such as wiping down the area with a clean cloth or using compressed air to remove the dust, can help improve the tape's performance in dusty environments. Overall, while packaging tape can generally perform well in dusty environments, it is essential to consider the quality of the tape, the level of dust exposure, and the proper surface preparation to ensure optimal adhesion and package security.
- Q:Can packaging tape be used on different surfaces, such as cardboard, plastic, or metal?
- Yes, packaging tape can be used on different surfaces such as cardboard, plastic, or metal. Packaging tape is designed to provide a strong and secure seal, making it suitable for various materials. It adheres well to the rough surface of cardboard, ensuring that boxes and packages remain securely sealed during transit. Additionally, packaging tape can adhere to smooth surfaces like plastic, ensuring that items are securely packaged and protected. It can also be used on metal surfaces, providing a reliable seal for packages and boxes made of metal. Overall, packaging tape is versatile and can be used on different surfaces, making it an essential tool for packaging and shipping needs.
- Q:Can packaging tape be used for sealing electronics or appliances?
- No, packaging tape is not recommended for sealing electronics or appliances as it may not provide sufficient protection against moisture, static electricity, or other potential hazards. It is advisable to use specialized tapes or sealants designed specifically for electronic or appliance sealing.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Tape of Good Waterproof Dampproof and Insulation for Pipe Wrapping
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 roll
- Supply Capability:
- 1000000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
