PVC Pressure Pipe Plastic Building Materials on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:How can the rubber joint be classified according to the range of temperature?
- According to the applicable temperature range can be divided into general, mild, special three categories.
- Q:Why can the air conditioning connection be made of copper tube? How about rubber tube and aluminium pipe? Please heroes pointing for the dishes.
- The pressure of the aluminum pipe is relatively small. "Again, when the aluminum pipe is too soft, it is easy to be flattened.".. Rubber tubes will decay if they are used! Withstand pressure is also high!
- Q:What is a rubber core pulling method?
- When in use, one end of the hose is sealed, and the other end is inflated. A method of sealing surface of the hose end foot will truncate 1--3 rubber canvas, and then the steel pipe with coarse thread surface (steel tube with iron seal welding hose end) insertion hole, and 20 wire and hose surface densely wrapped firmly, will head with tin welding wire. Then, the valve is connected to the end of the inflatable end.
- Q:Can the rubber hose for the LPG cooker and gas cooker be general?
- The rubber hose for the gas cooker and the gas cooker can be used as long as the size is the same.
- Q:High pressure hose K type joints KJR32 and KJR31.5D what is the difference between ah, please give us a answer,
- K type joint has the distinction between national standard and German standard. In general, 32 and 38 tubes are used more often. The joints used on 32 of the tubes are KJR32 and KJR31.5D. 38. The joints used on the tubes are KJR38 and KJR B40
- Q:Which is safer for stainless steel bellows and rubber tubes for gas pipelines?
- The stainless steel bellows and the quick fitting joint connection way mostly uses the end face seal, may avoid the thread seal to be lax strictly the leakage, compared with the traditional installment, its leakage probability will reduce greatly.
- Q:Toilet hose and water tank joints leaking, how to repair?
- There is a rib joint. It may be that the rubber sealing ring in the joint is not installed or damaged. Turn off the water source, disassemble, check and replace;
- Q:Faucet hose connection problem
- Ball valves can be made, but easy to leak. More than a few times to install a feeling, when the screw does not use brute force ah.
- Q:What are the methods of sterilizing rubber hoses and Perspex?
- The rubber tube is directly into the steam sterilizer. After a few cracks, throw them away and use the new ones.
- Q:Flexible rubber joints. What do they mean by flexing?
- Stainless steel bellows are not a kind of rubber joint.Flexure generally means that it can be bent repeatedly.The rubber joint mainly plays the axial and angular compensation displacement, and withstands the mechanical vibration, protects the pipeline not to burst.Stainless steel bellows can also be flexible, but the performance of vibration proof is better than that of rubber joints. If the requirements of the engineering drawings are rubber joints, it is better to be careful. Don't change it indiscriminately. Otherwise, the service life will be affected
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pressure Pipe Plastic Building Materials on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
