PVC Pressure Pipe Ease of Inistallation
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:High pressure hose crimping connector, pressed on what position can effectively prevent the head off?
- If the withholding at the blasting, the main reason is the hose and the joint has not reached the best fit, in the areas of improvement should be mainly in joint selection and press on.
- Q:How can I remove all the flavor on the rubber hose?
- Buy Rubber deodorant. Or dry, there is no other way.
- Q:How can the hose of natural gas be connected to the water heater?
- It should be noted that when the nut is installed, pay attention to each nut must have plastic or rubber soft gasket, gasket must be flat, it plays the sealing role of the joint of the pipe joint.
- Q:How can we prevent the aging of rubber tubes?
- The second is the design of the structure of the rubber products (especially damping products), has a great relationship between aging and fatigue, should avoid stress concentration! If the product is good has been produced to prevent aging, more trouble! Can be sprayed on the rubber surface, spraying insulation polymer.
- Q:How to remove the smell of gasoline in the car?
- When filling, the filling is full - when the gas is filled up, it may cause the gasoline to go down the tube into the canister so that a large amount of gasoline vapor is released from the vent of the canister.Answer: turn on the air conditioner, use the internal circulation mode (the windows should be closed, air conditioning refrigeration), so, when the car runs for a while, the gasoline will dissipate.
- Q:Between the two flanges in the middle of the rubber tube, what is the name of the connection?
- Rubber flexible joint is also called rubber flexible joint, flexible rubber joint, flexible rubber joint, rubber shock absorber and so on.
- Q:Why does Br2 corrode rubber tubes?
- Br2 bromine gasBr2 bromine element at room temperature is dark brown liquid, soluble in water, 100g water can dissolve about 3G bromine. Highly volatile, toxic, steam strongly stimulate the eyes, mucous membranes and so on. The water solution is called bromine.
- Q:How can I connect the gas tank connection hose?
- The general is directly inserted into the connector on the line, if loose, can use wire twist, still feel not reliable, can go to the market to buy two hoop, screw on the line.
- Q:The use of anti slip rubber joints under what circumstances?
- The appropriate model must be selected according to the working pressure, connection mode, medium and compensation amount of the pipeline, and the quantity is chosen according to the requirements of noise reduction displacement.
- Q:Is it feasible to use rubber material, middle canvas layer and outer rubber material in PVC rubber tube?
- Improvement measures: 1, adjust the process, plastic material in place; mixing rubber plastic stability; vulcanized rubbing with low temperature long time vulcanization; 2, test cloth in curing temperature shrinkage coefficient is too big, consider changing cloth;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pressure Pipe Ease of Inistallation
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords