PVC Pressure Pipe (ASTM Sch 40& 80) ASTM, AS,BS,ISO, GB, varios color
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Are plastic tubes resistant to moisture?
- Yes, plastic tubes are generally resistant to moisture.
- Q:What are the different closure options for screw-top tubes?
- The different closure options for screw-top tubes include screw caps, flip-top caps, snap-on caps, pump dispensers, and dropper caps.
- Q:Can plastic tubes be used for storing sensitive electronic components?
- No, plastic tubes are not suitable for storing sensitive electronic components as they can generate static electricity and lack the necessary protection against electromagnetic interference and physical damage.
- Q:where would be a good place to start looking? recycling places? arts and crafts? home depot? Im just looking for something rather cheap.
- The only place I can think of would be an aquarium supply store. It won't be cheap though. You might also be able to find it at a store that sells waste collection set ups for woodworkers.
- Q:Is rigid PVC double wall corrugated plastic pipe with HDEP pipe one kind?
- It is a hard PVC amorphous thermoplastic resin with certain additives of vinyl chloride monomer after the polymerization and made (such as stabilizers, lubricants, fillers, etc.). But strictly speaking, UPVC is hard PVC, and PVC UPVC is not hard, rigorous and scientific discussion should be UPVC UPVC, which does not contain or use plasticizer, hard PVC containing plasticizers (general formula PVC powder + plasticizer + auxiliary plasticizer stabilizer + + + + class processing aid filler toner)
- Q:Can anybody tell me what the plastic tubes/lines are that run along the under body of my 2003 GLI? I was driving down the highway the other day, and a Semi truck dropped a big chunk of ice off of it and I took a shot to my under body. When I got home I checked under neath and notice it dented my fuel filter pretty back and pinched a white plastic hose that was next to the fuel filter. I followed the line and it goes into my rear pass. wheel well. I looked in the owners manual but I can't find anything on these lines that are under there. Some are blue and some are white. Anybody know what it is? I unkinked the hose and everything seems to be running fine, I'm assuming it's some type of vent, maybe for the gas tank, but I've never seen anything like this before, and I'm kind of confused why they would run something like that under the body of a car that sits so low to begin with. I would really like to know what these lines are. Thanks!
- The white ones are usually vacuum lines. Have you tried popping your fuel door or truck with the door switches yet?
- Q:Can plastic tubes be used for packaging cosmetics?
- Yes, plastic tubes can be used for packaging cosmetics. They are commonly used for various cosmetic products such as creams, lotions, gels, and lip balms due to their flexibility, durability, and ability to protect the product from contamination and air exposure.
- Q:What is the difference between rigid and rigid and semi rigid in electric PVC plastic pipes?
- The essence of PVC is a kind of vacuum blister film. It is used in the surface packing of various panels, so it is also called decorative film and adhesive film. It is applied to many fields such as building materials, packaging, medicine and so on. Among them, the building materials industry accounted for the largest proportion, 60%, followed by the packaging industry, as well as other small range of applications.
- Q:What material of buried pipeline needs to be treated with rust prevention? What kind of material needs to be treated with antiseptic, what kind of material is it made or not?
- But such as corrosive or too humid environment, such as galvanized steel pipe also need anti-corrosion; there are electrochemical corrosion conditions, such as beaches, concrete, not repair steel pipe also have anti-corrosion measures; and so on.
- Q:Can plastic tubes be customized in terms of size and color?
- Yes, plastic tubes can be customized in terms of both size and color. Manufacturers can produce plastic tubes in a wide range of sizes, diameters, and lengths to meet specific requirements. Additionally, they can also customize the color of the tubes by adding pigments during the manufacturing process, allowing for a variety of color options.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pressure Pipe (ASTM Sch 40& 80) ASTM, AS,BS,ISO, GB, varios color
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
