PVC Pipe with 110MM 0.63-1.6MPa GB/T10002.1-2006

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1000 kg
Supply Capability:
10000 kg/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Description of PVC Pipe :
Material: Virgin Rigid PVC resin, no recycle material
Process: vacuum forming extrusion
Color: various colors, we can make color according to Panton card No.
Quality Standard: Smooth surface, no spot, no shrink mark, no surface quality defect.Check from cross section, homogeneous in density, good plasticizing degree, relative chemical/physical property meet customer requirement. We supply different environment protection products to meet different market requirement.
2.Features of PVC pipes :
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
3.PVC Pipe Images:

PVC Pipe with 110MM 0.63-1.6MPa GB/T10002.1-2006

PVC Pipe with 110MM 0.63-1.6MPa GB/T10002.1-2006

4.Specifications of the PVC pipe:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white  pvc pipe, grey  pvc pipe , etc.
4) Specific Gravity:g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature: (C)  >=79
5.FAQ 
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:why doesnt the plastic top of superglue stick to the tube?
The glue does not stick because the plastic on the inside is to smooth for it to stick. Also it does not dry on the inside because they need air to dry in
Q:Where can I buy thin plastic flexible tubing?
Plastic Flexible Tubing
Q:securing a hollow tube to a flat wooden surface?
There okorder.com/
Q:Hot melt connection method of PE-RT plastic pipe or the matters needing attention
1 hot melt tools connected to the power, to reach the working temperature indicator light, you can start the operation;2 cutting pipe must be made perpendicular to the end of the pipe line. The general use of the pipe or pipe cutting shear pipe cutting machine, if necessary, use a sharp saw, but after cutting the pipe section should remove burrs and burrs;3 the end face of pipe and pipe must be clean, dry and oil-free;4 use calipers and suitable pens to measure and mark the depth of hot melt at the end of the tube.
Q:pressure drop through plastic tubing?
Take a look at friction loss table on the Internet. I saw one table that said 1.55 psi per 100 feet, and another that said 3.8. In fire sprinkler work, we use tables derived from the Hazen-Williams formula. I don't have a table that goes that low on flow. A search for Hazen-Williams will get you to the formula. You will want to use the actual ID or the tube. It may be different from the nominal ID. For a roughness factor you could use 140.
Q:What's the plastic tube that came with my violin for?
It's a string tube. You store spare strings in it (violin strings).
Q:Anyone know where I can buy a custom tube (wood, aluminum, or plastic) with the following dimension...?
Go to any machine shop they can turn one out in no time. By the way that is closer to being a ring than a tube
Q:In observance to Nat'l Toothpaste Tube Day, do you know why they started using plastic vs. metal tubes?
So that terrorists could pass their plastic explosives through metal detectors at the airport.
Q:whats the best way to connect two plastic tubes?
I would go for a coupler on the outside of the tube, which should be stronger and won't restrict the flow. Get some 12mm ID tube from a model shop or plastic supplier. Roughen the inside of the coupler and the outside of the ends of the tube with sandpaper, apply plenty of epoxy, assemble and leave to set. You might want to improvise some kind of jig to hold the 2 tubes in-line while it sets.
Q:Dropped plastic straw into transmission fill tube while tryin to syphon fluid?
Well if the trans is way overfull then you may want to drop the pan and put in the right amount this time.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range