PVC Pipe Water Pipe Network System, Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5< span="">
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Can plastic tubes be used for irrigation in agriculture?
- Yes, plastic tubes can be used for irrigation in agriculture. They are commonly employed for various irrigation systems, such as drip irrigation and sprinkler irrigation. Plastic tubes are durable, flexible, and cost-effective, making them an ideal choice for delivering water to crops efficiently and effectively.
- Q:How are plastic tubes filled with products?
- Plastic tubes are typically filled with products through a process called tube filling. This involves the use of specialized machinery that dispenses, measures, and seals the desired product into the tubes. The process may vary depending on the type of product being filled, but it generally involves automated or manual filling stations that accurately measure and fill the tubes. Once filled, the tubes are sealed, labeled, and packaged for distribution.
- Q:Are plastic tubes suitable for hydrostatic pressure testing?
- Yes, plastic tubes are suitable for hydrostatic pressure testing.
- Q:How do plastic tubes compare to aluminum tubes in terms of weight?
- Plastic tubes are generally lighter than aluminum tubes.
- Q:I have forgotten the name of the breed altough i know it starts with sy. I just want to know if they can fit in a tube cage or will they get stuck? And what is the best breed to get if you do have a tube cage?
- The bigger breed of hamsters are called Syrians. You are right about them not fitting in tubes. Once syrians grow to their full size, they tend to get stuck in the tubes of commercial cages like Crittertrail etc. The best way to avoid this is to give them a non tube wire cage, glass tank or non tube plastic cage. Dwarfs can fit into tubes but again dwarfs are generally shy of climbing vertical tubes, so if you have a tall cage with long vertical tubes, your dwarfs might never use it in their lifetime. I have a cage with lots of tubes but I have placed them horizontal to the ground so that my dwarfs use the tubes.
- Q:In the begging she chops off her arm but she puts the yellow thing around at the top her arm. WHY!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- You mean like she tied it tightly around her upper arm? To slow down circulation to her arm, so she wouldn't bleed out and die so fast when she did.
- Q:What are plastic tubes made of?
- Plastic tubes are typically made of various types of polymers, such as polyvinyl chloride (PVC), polyethylene (PE), or polypropylene (PP).
- Q:I recently bought a '95 C220, shes my first MB and after a week of driving I have vowed to never buy any other brand of car. I think i've just about figured out all of her idiosyncricies, however this one still confuses me. There is a small 1/4 diameter or so plastic tube comming out of the floor to the left the battery/fuse box in the trunk, about 8 inches long or so. It has an L connector on the end, but it is not fastened to anything, nor can i find anything that it could fasten to. Any clues anyone? Vaccume tube for some component that was never installed?
- i own a repair shop,and its called a battery drain off tube in case the battery spews over or something ,this routes in down toward the bottom of the car instead of letting it stay in the battery tray and eating it up,good luck i hope this help,s.
- Q:Can plastic tubes be used for storing chemicals or reagents?
- Yes, plastic tubes can be used for storing certain chemicals or reagents. However, the compatibility of the plastic material with the specific chemical or reagent must be considered to avoid any potential reactions or leaching. It is important to choose a plastic tube that is chemically resistant and meets the requirements of the stored substance to ensure safety and effectiveness.
- Q:Ok im in 6th grade and we have to make a roller coaster with 3 hills and a loop..ANYONE KNOW WHERE I CAN GET CLEAR-FLEXIBLE TUBING???(Please dont say im too yooung i have permission to be on here) Please help urgent!Much appreciated
- Clear vinyl tubing in various sizes is available at just about any hardware store.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pipe Water Pipe Network System, Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords