PVC Pipe redWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:i live in Seattle. I was wondering where I could by the plastic tubing to make the leis. I've looked EVERYWHERE!
- Candy Lei Netting
- Q:What are the ways to remove the taste in plastic pipes?
- Method for removing peculiar smell of plastic pipe by vinegar. Clean the plastic tube with detergent first. Then soak the plastic tube in the vinegar and heat to 50-60 degrees. Keep the temperature. After 30 minutes, take out the plastic tube and clean it;
- Q:What's the function of the plastic tube in this crown beam?
- Because the screw to pass through the concrete cover, casing, Chaimo screw can be conveniently taken out. The exposed part of the tube will eventually be removed, and the tube will be poured into the mortar to smooth it out.
- Q:the tubes are bout 1cm ID with only about a 1mm thickness. I don't think threading them will be possible, and the seal between that has to be water tight.
- you need coupling or socket to connect the two pieces and then apply adhesive to connect, there is a traditional way which you heat up on side to form a spigot or cone shape little wider than 1cm and insert one end while it is hot then press for tightness, this is not good from quality point of view.
- Q:What are the commonly used indoor plastic drainage pipes in the market, as well as the advantages and disadvantages?
- The general situation of the PVC pipe because the price is low, without considering the impact water quality in the cold water supply system belongs to the first pipe, and when the temperature is high, can choose polyethylene pipe or cross-linked polyethylene pipe, polypropylene pipe, polybutylene pipe.
- Q:Where do I find a metal magazine tube follower for a remington 1187?? All i can find are plastic!!!?
- MOST newer followers are plastic, and seem to work just fine.
- Q:What are the plastic pipes that can be welded?
- What plastic material can be welded? What's the question? - ah, a little dizzy, not plastic. What is it? Generally weldable plastic pipes are PPR tubes and PE pipes.
- Q:i got water leakin on the driver floorboard and i figured it was the drain tube but i cant find it to save my life. anybody have an idea? any help is appreciated. thanks
- OMG we spent a good 40 minutes trying to find the one on a Galant. Look under the dash on the driver's side towards the center up by the front firewall. Up and above to the right of the gas pedal. The left side of the big black plastic airbox is hopefully right there, if it's not covered up in trim panels, and there is the black plastic elbow tube coming from the box then bending forward through the firewall. Use that point of reference to go on the engine side and try to find it poking through the firewall. It only sticks out maybe 1/4 of an inch. Might be some metal hydraulics in the way. Probably a full arm length down, and that's with you draped over the car. It's a nightmare to get at, but it's doable once you find it and then find a way to snake your arm in from underneath. I used a long plastic tube taped to the blow tip of an air compressor and fed it in to the drain tube. Some people say stick a wire in , but I found the 90 degree bend in the tube on the inside made that worthless.
- Q:What are the different shapes of plastic tubes?
- There are various shapes of plastic tubes, including round, square, rectangular, oval, and triangular.
- Q:Can plastic tubes be used for pet enclosures?
- Yes, plastic tubes can be used for pet enclosures. They are often used in small animal habitats, such as hamster or gerbil cages, to provide tunnels and hiding spots for pets to explore and play in. However, it is important to ensure that the plastic tubes are safe and non-toxic for pets to avoid any potential health hazards.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pipe redWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
