PVC Pipe ASTM, AS,BS,ISO, GB Made in China

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 mm
Supply Capability:
1000 mm/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Specifications

pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.

2.Properties of pvc pipes:

1.  Material: pvc pipe unplasticized polyvinyl chloride

2.  Standard: GB, ISO9001, ISO14001

3.  Color: white  pvc pipe, grey  pvc pipe , etc.

4.  Specific Gravity, g/cm3, 20(C): 1.35 - 1.55

5.  Vicat Softening Temperature, (C)  >=79

6.  Longitudinal Reversion, %, 150(C) <=5

7.  Dichloromethane Resistance Test: No attack

8.  Falling Weight Impact Test, TIR, %, 0(C) <=10

9.  Tensile Yield Strength, Mpa >=40

10.  Fitness of Water Tightness Test: No Leakage

11.  Fitness of Air Tightness Test: No Leakage

3.Features of pvc pipes : 


1)  Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2)  Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.

4.Application of pvc pipes:

1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture

 

5.Specifications of the pvc pipe:

Outer Diameter (mm)

Wall thickness(mm)

2.5MPA

2.0MPA

1.6MPA

1.25MPA

1.0MPA

0.8MPA

0.63MPA

φ20

20*2.3

20*2.0

φ25

25*2.8

25*2.3

25*2.0

Φ32

32*3.6

32*2.9

32*2.4

32*2.0

Φ40

40*4.5

40*3.7

40*3.0

40*2.4

40*2.0

Φ50

50*5.6

50*4.6

50*3.7

50*3.0

50*2.4

50*2.0

Φ63

63*7.1

63*5.8

63*4.7

63*3.8

63*3.0

63*2.5

63*2.0

Φ75

75*8.4

75*6.9

75*5.6

75*4.5

75*3.6

75*2.9

75*2.3

Φ90

90*10.1

90*8.2

90*6.7

90*5.4

90*4.3

90*3.5

90*2.8

Φ110

110*10.0

110*8.1

110*6.6

110*5.3

110*4.2

110*3.4

110*2.7

Φ125

125*11.4

125*9.2

125*7.4

125*6.0

125*4.8

125*3.9

125*3.1

Φ140

140*12.7

140*10.3

140*8.3

140*6.7

140*5.4

140*4.3

140*3.5

Φ160

160*14.6

160*11.8

160*9.5

160*7.7

160*6.2

160*4.9

160*4.0

Φ180

180*16.4

180*13.3

180*10.7

180*8.6

180*6.9

180*5.5

180*4.4

Φ200

200*18.2

200*14.7

200*11.9

200*9.6

200*7.7

200*6.2

200*4.9

Φ250

250*11.9

250*9.6

250*7.7

250*6.2

Φ315

315*15.0

315*12.1

315*9.7

315*7.7

Φ400

400*19.6

400*15.3

400*12.3

400*9.8

 

6.FAQ

 

Q:What is you MOQ?

A:As customer’s request.

 

Q:What is the production ability? or delivery time?

A:Our production ability support 40HQ order finish in one week.

 

Q:What is the regular shipping port?

A:Tianjin or Shanghai.

 

Q:What is your payment?

A:TT or CC.

 

Q:Can we have sample?

A:Sample free, freight cost you.

 

Q:For urgently doubts,who online?

A:Sales and marketing Manager 24hours online service.

 

 

  PVC Pipe ASTM, AS,BS,ISO, GB Made in China

PVC Pipe ASTM, AS,BS,ISO, GB Made in China

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The difference between the rubber pipe and PE pipe?
The appearance of the native HDPE is milky white and is somewhat translucent in the narrow cross section. PE has excellent properties that are resistant to most life and industrial chemicals. PE pipe welding, butt welding of PE pipeline, the method provides the highest reliability and the diameter of the range and pressure process: the end of the heating tube, using a tool called mirror contact pressure and temperature under the definition of "". The ends are contacted rapidly and remain under pressure during cooling. A medium density polyethylene pipe and PE pipe with high density polyethylene pipe. Divided into SDR11 and SDR17.6 series according to the wall thickness. The former is suitable for transporting gaseous artificial gas, natural gas and liquefied petroleum gas. The latter is mainly used to transport natural gas.
Q:Carbon dioxide gas shielded welding torch wire feed hose joint, that steel wire can not be drawn out, how to solve it, with welding?
Some of the torch wire feeding hose can not be replaced, it is fixed dead, such as Xiong Gu, Lincoln's self shielded flux cored wire, welding torch.
Q:Flexible rubber joints. What do they mean by flexing?
Stainless steel bellows are not a kind of rubber joint.Flexure generally means that it can be bent repeatedly.The rubber joint mainly plays the axial and angular compensation displacement, and withstands the mechanical vibration, protects the pipeline not to burst.Stainless steel bellows can also be flexible, but the performance of vibration proof is better than that of rubber joints. If the requirements of the engineering drawings are rubber joints, it is better to be careful. Don't change it indiscriminately. Otherwise, the service life will be affected
Q:Faucet hose connection problem
Ball valves can be made, but easy to leak. More than a few times to install a feeling, when the screw does not use brute force ah.
Q:What is the maximum pressure that a hose can bear?
Of course, there is a super high-pressure hydraulic hose, the working pressure of up to 80MP., using 6 layers of steel wire or more winding process.
Q:What is the principle of communicating devices? What if the rubber tube is used as a connecting device to change the water for the fish?
The principle of communicating devices can be explained by liquid pressure. If the same liquid is contained in a U glass tube, a small liquid AB is conceived at the center of the bottom of the communicating device. If the liquid is stationary, it does not flow. The pressure of the liquid in the left tube toward the right side of the liquid AB must be equal to the pressure of the liquid in the right tube toward the left of the liquid AB. Because in the communicating vessel is filled with a liquid, the same two liquid column density, according to the formula of P= P GH liquid pressure that only when both sides is equal to the height of liquid column, the liquid column is equal to the pressure on both sides of the liquid film AB. Therefore, in the case of no flow of liquid, the liquid level in each vessel of the communicating device shall be kept flat. (ideal model method) the connecting device is characterized in that the liquid level in each container is flat only when the same liquid is contained in the container. If the container is tilted, the liquid in each container is about to begin to flow. One end of the liquid column flows to the lower end of the liquid column and stops flowing until the liquid level in each container is normal. As with rubber tube two glass tubes connected together in container with a liquid, which will be a fixed tube, the other tube up and down or tilt, can see the two tube level in stationary phase remained flat. The connecting device is provided with the same liquid, but the pressure on the liquid surface is unequal, and the pressure difference of the liquid surface is equal to the pressure difference produced by the liquid level difference of the two container of the communicating device.
Q:What is the difference between plastic lined steel pipe and rubber lined steel pipe?
Difference1. processing technology:Rubber lined steel pipe generally adopts the manual adhesive, vulcanizing process (can also be cold bonding operation); plastic lining pipe generally adopts the heating equipment, the overall rotational (tight loose lining, lining, molding, molding) main process steps can be completed by means of equipment. Therefore, the production efficiency of the lining pipe is obviously higher than that of the lining rubber tube.2.: the physical properties of rubber lined pipe due to the inheritance of the excellent properties of rubber, the chemical corrosion and wear resistance, heat resistance is also very prominent, and the plastic lined pipe in addition to resistance to chemical corrosion and lining hose close to the outside, in the wear resistance, heat resistance and adhesive strength are not as lining hose.
Q:High pressure hose K type joints KJR32 and KJR31.5D what is the difference between ah, please give us a answer,
K type joint has the distinction between national standard and German standard. In general, 32 and 38 tubes are used more often. The joints used on 32 of the tubes are KJR32 and KJR31.5D. 38. The joints used on the tubes are KJR38 and KJR B40
Q:Does rubber hose drink from tap water? Is it poisonous?
Galvanized steel pipe is divided into cold galvanized pipe, hot galvanized pipe, the former has been banned, and the latter is also advocated by the state for the moment, can be used. In 60s and 70s, developed countries began to develop new types of pipes, and galvanized pipes were banned. China's Ministry of construction and other four ministries have also issued a civilization, from two, 000 years since the prohibition of galvanized pipe, the current New District cold water pipe has rarely used galvanized pipe, and some of the hot water pipe is galvanized pipe.
Q:What is the essential difference between natural rubber and three yuan ethylene propylene rubber?
Vulcanized natural rubber elastic rubber and its crosslinking density is not too high, the elasticity is high. For example, in the range of 0-100 DEG C, elasticres at 50-85 DEG C, the elastic modulus of steel is only 1/3000, the tensile elongation is up to 1000%, to 350%, after retraction of permanent deformation is only 15%, a higher elasticity of natural rubber in the general rubber after polybutadiene rubber.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range